16 modeli
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
Did not find a hex bit holder that worked for me, so I made my own.
100prznt https://www.printables.com/model/76938-bosch-144-and-18-v-battery-mount A remix of this excellent model from 100prznt - just using less material.
I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…
Refer to the free assembly manual. You can check it by test printing of small part attached. Flight Video https://youtube.com/shorts/GwDV2npC8tI
Box for 100pc 9x19mm rounds. To assemble this box fasteners are needed: -3x M3x20mm Socket Head Screw -1x M3x30mm Socket Head Screw -4x M3 Nylock Nut Material: PET-G, PLA etc. Layer high: 0,2mm or lower Supports are needed.
Need supports everywhere. The connection between ashtray mount and adapter is a tight fit so it may be wise to print outer perimeters first. 4x 3.5x16 mm wooden screws and 1x M6x20 with nut/wingnut needed. I printed the first one in PLA…
This is a remix of the original Ft-891/Z100Plus Cradle
Supports on buildplate only. No other special settings needed… Fixing with 4 pcs. 3.5x16 mm wooden screws.
176x160x120 dimensions You need to print holed-plate twice for better stability. This model was printed with Transparent/clear PETG, but still works with PLA Idea proposed by my gf Happy Printing!!
The Harris XG-100P has a recessed SMA Female antenna connector. Only Harris antennas specific to the XG-100P will fit elegantly. Using a widely available SMA Male to BNC Female connector, this spacer gives the support and stability needed…
Another reference modal. Feel free to print it for prototyping or whatever you need it for! If you're wondering, this is what I modeled it for: https://dpow.net/3d.html
Facil de imprimir pausar un poquito mas de la mitad meter la moneda y esperar a que acabe.
Make sure you have “Extra perimeters on overhangs” disabled if you want to print it laying flat on the bed, otherwise the bridges will fail.
can switch gps holder. just let me know. using tpu 95A
Some Explanations: Surely the Godox AD100pro comes with a quite usable fastening and so there is firstly no need for a 3D Printed part. But in my case i needed a minimised distance between a small "ball head" (in this case the LeoFoto…
