Liczymy pasujące modele…
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
Original plastic control knobs on my electric stove top started to crack at the stem where it attaches to the metal shaft. Replacement knobs are expensive - too expensive! I designed a replacement stem (all you need is to pull the metal…
The OWON XDM1241, being a budget bench multimeter, is quite a neat little unit for the hobbyist. Its small form factor certainly is a plus if you don't have a lot of bench space available. The downside of it being such a compact and light…
Remote control holder for Samsung BN59-01041A or similar. Open-bottom model for dirty environments.
Model of the housing for the OWON XDM1041 Digitial Multimeter and DGE2070 Arbitrary Waveform Generator. Useful for mocking up attachments or modifications for your devices. Files included: .stl, .step, .obj, .skp
I recently purchased the OWON DGE2070 Arbitrary Waveform Generator and the OWON XDM1041 Digital Multimeter. I wasn't sure where I was going to put them as my workbench is very small. After moving a few things around, I decided that, if I…
Modified the mount from Thingiverse so it can be attached to a Skadis board using the T-Clip system by @LineArcLine (using the negative hole by capze ). It is designed to you use a right angle power cable (see picture). You will need to…
I did an scan of the original part and sketch the scan into a 3D model 6mm thickness to make the tool stronger. In thoery it shoud work in real life Edit. I change the 12.6 diameter to 12mm and reduced the 26.6 to 26 mm.
Model of the rubber foot that I made to use while creating my stacking bracket for my meters. I only have PLA filament and never used TPU before. Not sure how well the dimension work for TPU, but with PLA it is a very solid fit.
The protective cap minimizes the risk of damaging the workpiece with the hard hammer, especially with delicate materials TPU/TPE Recomended CAD Files are included: l4 inner lenght b width f2 width of inner champfer Recommended Print…
2.5U 19 inch rack front panel mount for Owon XDM1041 / XDM1241 / DGE2070 / DGE2035 These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount /…
Replacement dust cup bottom cap for the Eureka AS1041A vacuum cleaner. The tabs that hold the dust cup end cap on my vacuum broke. I designed and printed this part to replace it. I have been using it on my vacuum cleaner for a couple of…
A couple of parts to replace the battery tray and RX/ESC tray and move them lower down. Also includes braces to replace the stock trays to save some weight and space. You can use the included hardware, although for the battery and RX/ESC…
Created by subtracting the outline model of the multimeter of a standard GF-Block. I added a 2-slot bin for the measuring tips and cables
I got rid of the gridfinity base, and added screw holes to mount it. Holes are sized for a #4 flat head wood screw. STEP file included so you can make your own mods easily.
The protective cap minimizes the risk of damaging the workpiece with the hard hammer, especially with delicate materials TPU/TPE Recomended CAD Files are included: l4 inner lenght b width f2 width of inner champfer Recommended Print…
Replacement carrying handle for the Hama Star 61 tripod (921041) since the original have a design flaw that makes it very keen on breaking. Designed so the original hook is a loop instead for better strength & durability. Made in 2 parts…
This is a replacement GE dishwasher lower rack wheel axle, patterned after the manufacture's new style of OEM part, but reinforced and enhanced for a better fit and for a stronger 3D print. Works on front or rear wheels. If you want to…
