Liczymy pasujące modele…
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Do not insert this printed template itself into a drive. While it may work out OK, I'm not sure how the printed surface or any defects would affect the head and other internals. Template to mark and cut transport cards for the Commodore…
A modified version of the original front cover for Commodore 1541 II with MeGALoDOS Multispeeder. Modified for 0.96" OLED display and rotary encoder. The front fits for models with CHINON drive and together with the original case parts.
Raspberry Pi 3A+ with Pi1541 IO hat case giving full access to the main outputs of the IO hat, including the two 6pin DINs, the 5 side buttons, the 2 LEDs & the OLED connector. Also has a commodore logo over the GPIO buzzer so it is not…
Commodore 1541-II front and lid. This variant is for DS-50F drive. In the next future, I'll make also CHINON FZ-501M drive variant. There are nr.3 files: the front part, the lid and the Commodore logo.
This is just an alternative bottom piece (2 different versions, like the original) for the TapTo NFC 1541, designed to hold the PN532 V2.0 board that can be found at AliExpress here: https://www.aliexpress.com/i/3256805076433294.html It…
after my floppy fell down, I had to make a new base. Update 6-2025: updated version because the newer slicers render it incorrectly. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill:…
This is a miniature floppy disk to be used with TapTo NFC 1541 drive by Bedroom_ninja https://www.printables.com/model/791580-tapto-nfc-1541 Attach a small NFC21x tag to the back side and your floppy disk for TeensyROM's NFC loader is…
This is an updated enclosure for a Raspberry Pi 2B or 3B with a Pi1541 hat from this website. The cover for the display snaps firmly into place by sliding it toward the buttons on the hat. M3x8 screws are used to assemble the top and…
This a small box to house the XUM1541 I got from myretrostore-uk on ebay. There are 2 lid options, one with writing on as seen in the pics and one blank. The lid is just a press fit, but quite tight.
Added Tandy Logo to make it look like a DOS era external floppy drive.
No supports needed. No special hardware. The pi1541 will fit snugly in the bottom. and the top is a friction fit.
This is a remix in extremis. There is not a single part that has not been altered, but all for the better, in my opinion. Not there is anything wrong with the source (by ogg1e, which is a remix already) The changes are listed below.…
Cage for card insert to replace the joists in the TapTo NFC 1541 model
Various brackets to stack 2 (or more) 1541 floppy drives on top of each other. The weight of the bottom device keeps everything stable. The space in between provides enough room for ventilation. I designed 4 models: Single: a separate…
This is a sled to reduce the wiggle room of the usb-c style DIY Zaparoo reader in the 1541 style shell by BedroomNinja. This sled needs to be inserted from the front, and the lip at the front of the 1541 shell will hold it in place and…
The the Pi1541 case for all the C64 retro maniacs. PLA printed. A “led lite pipe” is not required and hard to say if it would work, cause i can't print in on my fdm printer… Kris
The C1541x is a reused Commodore 1541 plus some other components held together with some 3D printed parts. Like the Commodore 1541 disk drive is a companion device to the Commodore 64 computer for accessing media, The C1541x is a…
Stephen White's Pi1541 project: https://cbm-pi1541.firebaseapp.com/ There are many Pi hats based on that project, and the particular one I have is a kit from https://store.ribit.se/egna-produkter/pi1541.html The case openings are modeled…
A rim for the #15413 lego wheel that has a diameter of 49.5mm and width of 20mm with a 5mm axle hole. Originally made for a A2212 motor with a 5mm shaft. You can easily go into the FreeCAD file and change the axle hole size. Printed…
A case for an ESP32 with the meatloaf-firmware. Check out https://meatloaf.cc/ if you own a Commodore computer with IEC-ports. You can load programms from SD but also from the internet! Also the computer can access the internet (yes from…
A simple housing for the 1541-II Power Guard project by Stefan Wagner. Requires a rubber seal ring with an outer diameter of 7-8mm. Optionally also requires two pieces of acrylic fiber 2x20mm inserted into the top part and fixed using UV…
A simple case for the XUM1541 Board by Faszination C64. There are two versions of the top case. One with an hole for the parallel cable or if You don't plan to use it, one without. The screwholes will tight fit M3x12mm screws. Print…
Print with white or some other light or transparent filament so you can see activity LED working.
Hole dia. is 5mm. You will need a pretty long extension to screw in the top screw, acces holes are pretty large tho. The origial stand is being used and may only need a couple of pieces facing the wall removed. Please see the picture for…
The Pi1541 has inspired many beautiful case designs, such as this one: https://www.thingiverse.com/thing:4600177 . Pradi has taken this design and modified it to fit a version of the Pi1541 with a differently shaped display. In addition…
The case for the level converter allows you to build the simplest version of PI1541. The converter is mounted on the cable and allows you to connect the C64 to Raspberry Pi with the proper software. The case is screwed, you need screews…
This is a case designed for the b5s4 XA1541 Active - a device for reading and writing C64 / C128 and VIC-20 disks using an original Commodore floppy drive on a PC OnShape Model…
Das Gehäuse enthält einen Schnappverschluss, so dass es keine Schrauben benötigt.
Main pi1541 project page: https://cbm-pi1541.firebaseapp.com/ Raspi zero hat used: https://www.pcbway.com/project/shareproject/RASPBERRY_Pi1541_ZERO_HAT_COMMODORE_64_DISC_DRIVE_EMULATOR_1.html Original case:…
