Liczymy pasujące modele…
The ammount of protein in the scoop depends on how much you fill it. If you fill it like a “bro” you'll get around 15g. If you fill it just to the brim you'll get roughly 12.5g. Enjoy!
A low-flow spray bar for the 15gallon Fluval Flex, designed to reduce the flow in 3 directions. Fits inside the outlet. Use PLA or PETG, no supports required.
A tool to remove silicone and caulk.
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…
The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.
Remix of my large can lid for my dog food. Also see my TPU versions, Avoid brittle PLA's for this, it needs some flex. If you are using TPU or other flexible filaments you can scale X Y in for a tighter fit. Snaps on perfectly with this…
print with the inlet facing up, no supports needed, recommend PETG.
A simple light mount for the AI Prime & Innovative Marine 15 gallon nuvo cube that sets the height of the light at the BRS recommended 10" tall . This works well with minimal support (only needed on the thread hole). I've also paired it…
Easy to print 15g protein scoop. Remix of https://www.printables.com/it/model/178062-protein-scoop-15g
use two T6 M2 screws (the screws used for height adjustment on the MxK) to screw the PCB onto the part use three T6 M2 screws , (the screws used to screw the MxK bottom shell into the MxK carbon fiber shell) two screws to connect the two…
Measuring spoon 15g / 2cl . Use automatic support. Filling 30% Good Print
Base for 15g Quick Mill baskets. Didnt like the approach of other Remixes, so I re-did it.
I couldn't find any good protein scoop models so i made one myself. Its designed with a volume of 37.5cm^3 as the average whey powder has a 0.4g/cm^3 density. Print with 0.2mm layer height and support. About 20% infill is enough. I used…
quick and dirty remix of the Duckyprint Nubsound G3 mount - for the Nobsound NS-15G hint: print it standing like in the stl file, supports are not needed - have it cooled down before removing it, otherwise you could damage the screw…
Replacement meet gringer wheel to Tefal masterchef gourmet kitchen robot. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Creality PLA Orange Notes: Print horizontaly for…
This is a simple business card holder made to display your business cards in corporate events, tradeshows, and at your desk. This model works perfectly with standard size business cards. This is also a good test print for a new printer to…
Case for the 4815G2. I got away printing it with the front fan vent facing the build plate, no supports. I used 95a TPU, it needs to flex around the charger to install!
https://www.amazon.com/dp/B00BK4W8TQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Has a spot for an embedded m3 nut. You should be able to pause at layer and drop one in.
Made this remix especially for the Baby Powder application. When you have a baby and you’re giving powdered milk, you know that after a few months you need to prepare quite a lot of it mixed with water. You do get a small scoop in the…
https://www.amazon.com/dp/B00BK4W8TQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Has a spot for an embedded m3 nut. You should be able to pause at layer and drop one in.
second prototype of glue holder and spatula holder ( a better version than the one in the photo)
