P
Printablesplomdawg
Gridfinity Battery Box: CR2032/CR2016, CR2450, CR1620, and 357/303/SR44/A23/MN21/AAA slots
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
- Pobrania
- 565
- Polubienia
- 79
- Ocena
- 4,5
Wyniki wyszukiwania: 1620
Liczymy pasujące modele…
P
PrintablesRabid Badger
Hyper Go 16207 16208 16209 16210 battery arm
This allows you to use non-proprietary batteries in your Hyper Go 1620X series RC car without resorting to a Velcro strap. It also retains compatibility with the stock proprietary batteries. It will accommodate batteries up to 35mm deep…
- Pobrania
- 352
- Polubienia
- 35
- Ocena
- 5
P
PrintablesRigid3D
MJX 16207 Hyper Go RC Buggy Front Shock Tower Cover
MJX 16207 Hyper Go RC Buggy Front Shock Tower Cover Needed Hardware: 2pcs M2.5x12mm screw (12mm would be perfect length, photo shows 20mm screws) 2pcs M2.5 nut
- Pobrania
- 189
- Polubienia
- 19
- Ocena
- 4
P
PrintablesCristian Chiracu
MJX 16208 and similar redesigned arms
For MJX Hyper Go H16H H16E H16P 16207 16208 16209 16210 rc car. Part Numbers: Front swing up 16210 Front swing down 16220 Rear swing up 16240 Rear swing down 16250 Most of the measurements are the same, a bit redesigned to be more beefy,…
- Pobrania
- 186
- Polubienia
- 24
- Ocena
- 0
P
PrintablesAuburn
Hyper Go MJX 16207 16208 16209 16210 Battery Holder
Battery retention arm model can be found here: https://www.printables.com/model/645510-hyper-go-16207-16208-16209-16210-battery-arm Designed to snuggly fit a 75 * 34 * 26.5mm or 2.95 * 1.34 * 1.04inch battery pack This is the battery…
- Pobrania
- 174
- Polubienia
- 26
- Ocena
- 0
P
Printablesmobbarley
Suzuki Jimny Rear Speaker Adapter JB74 Suit Pioneer 6.5" TS-G1620F-2
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
- Pobrania
- 164
- Polubienia
- 20
- Ocena
- 0
P
PrintablesTreoWayne
MJX Hyper Go 16207 spoiler
I have an MJX Hyper Go 16207. It is a wonderful cheap RC car and is too fast for its own good when used with the included 3S lipo battery. Fast enough to flip over often and damage the rear spoiler and the wheelie bar. In my case the…
- Pobrania
- 158
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDenis Bernhardt
Gridfinity Battery CR LR - Max (CR2032, CR2016, CR1620, LR44, LR1130, LR626, LR43)
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
- Pobrania
- 124
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAndrej
Spoiler for RC buggy MJX HyperGo 16207
Custom spoiler for the popular RC Buggy MJX HyperGo 16207 wich also protects the shocks tower Print it with PETG or PCTG, the bracket/mount can be printed with TPU to prevent breakage in the event of a harder collision. Use 7% organic…
- Pobrania
- 122
- Polubienia
- 14
- Ocena
- 0
P
Printablesdachnlk
Roof sliders for MJX Hyper Go 16208 RC Car
This model was designed specifically for TPU plastic. It molds perfectly to the shape of the body and breaks slowly. Everything is installed in its original place. The cover is slightly larger than the original one, which better protects…
- Pobrania
- 119
- Polubienia
- 18
- Ocena
- 0
P
PrintablesThijs
MJX Hyper go 16208 body shell latch
Taken from here: https://www.thingiverse.com/thing:5674578 For 16208 and 16209
- Pobrania
- 115
- Polubienia
- 8
- Ocena
- 5
P
PrintablesArstan Zhienbaev
MJX 16207 Hyper Go RC Buggy
Assembled with 2 bolts 2.5 mm by 20 mm
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 0
P
PrintablesAndrej
Spoiler bracket for MJX HyperGo 16207
Since I broke the original spoiler bracket, I decided to design and make my own. With the original one the spoiler practically touched the shock tower, which I didn't like, so I designed this one in such a way that the spoiler is moved…
- Pobrania
- 73
- Polubienia
- 7
- Ocena
- 5
P
PrintablesJonny B
MJX HYPER GO 16207 Buggy Drift Wheel
Drift sleeve for 16207 buggy. Works well. Print with PETG.
- Pobrania
- 70
- Polubienia
- 6
- Ocena
- 0
P
Printablesgeorgmierau
Yet another CR1620 container
A simple battery holder for six or ten CR1620 batteries as requested by @Bamse_2416348. The model requires well tuned support interfaces for a clean print. I had no CR1620 batteries lying around, so on the photo it's filled with 1 euro…
- Pobrania
- 64
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBamse
CR1620 to CR2032 Adapter
This model spawned from me looking for a weather resistant storage case for both CR1620 and CR2032. After some searching that ended up with nothing I designed a small and fast-to-print adapter for the CR1620 so I could use one of the many…
- Pobrania
- 62
- Polubienia
- 17
- Ocena
- 0
P
Printablestato_713
1620 Geographos scaled one in eigthy thousand
I did not render this model, I just resize, soften and simplified it Windows 3D Builder to share the same scale as other objects. The original file is from the collection of asteroid radar detection of the PDS site. The file's names…
- Pobrania
- 62
- Polubienia
- 4
- Ocena
- 0
P
PrintablesIain Hay
Gridfinity with pin Coin cell storage CR1450, CR2032 CR2032/CR2016, CR2450, CR1620, and 357/303/SR44/A23/MN21/AAA slots
A coin storage solution remixed to be compatible with the excellent gridfinity with pin system which requires no magnets: https://makerworld.com/en/models/440624#profileId-346300
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 5
P
PrintablesEC3DMD
Hyper Go 16208 1/16 shock attachment
It’s a replacement part for the shock attachment on the MJX Hyper Go 16208 1/16 RTR or probably any of the other hyper go 1/16 RC’s Any material To make it little stronger print with one wall and a 100% infill pattern Print horizontally…
- Pobrania
- 48
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDougS2K
Battery Storage AAA, AA, C, 9V, CR1220, CR1620, CR2032, LR44
I needed a battery storage option for a lower profile drawer and almost every battery storage option I found had the batteries standing up so I designed one that allows them to lie flat. I gave a few mm clearance clearance to allow for…
- Pobrania
- 46
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPeter Nijor
mjx hyper go 16208 battery holder
The model is designed to hold the battery in place. The front part is designed to prevent damage to the battery in the event of an accident with the RC car. When installing this holder, you need to remove the original holder. Mount the…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 5
P
Printablescrasbe
Mercedes OM616/OM617 Thermostat Housing Gasket (A6162030280, A6172030080, 811.077)
General This is a replacement for the thermostat housing gasket used on the Mercedes-Benz OM616 and OM617 engines with the Mercedes part numbers A6162030280, A6172030080 and Elring part number 811.077. Currently it's hard to find the…
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 5
P
PrintablesJOGIAREA
Roco Motoradapter 85060 Glockenanker Motor 1620 H0 / Roco Motor Adapter 85060 Bell-type Armature Motor 1620 H0
Zwei Versionen für einen Adapter für 1620er Glockenmotoren, einmal einfach und einmal mit Halterungen für Entstördrosseln Beides zu drucken ohne Stützen Two versions of an adapter for 1620 bell motors, one simple and one with brackets for…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesYO3GND
Gridfinity Battery Box: CR2032/CR2016, CR2450, CR1620, and LR44
Better fit for the LR44 cells
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDrew Makes Gadgets
Sansmart LE-1620 Laser Anchor
This is an anchor for use with the desktop laser made by SainSmart/Jinsoku LE-1620 That will help keep it stationary and always find your home location. Screw these into the base on a piece of plywood, safely remove the laser for storage…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
Printablestymbobincan
Wall Mount for the EGO Trimmer Model ST1620T
This is a wall mount for the EGO Trimmer model: ST1632T. This model has a built in bracket for hanging on a wall. Yes, you could use a big nail or a hook, but I decided I wanted something that was more stable and prevented it from…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
MJX 16207 Hyper Go Front Shock Tower 16170
Custom-designed strengthened front shock tower for MJX Hyper Go 1/16 scale models. This part is a direct replacement for the stock component and is engineered to fit precisely using the original hardware. Printed in solid with 100% infill…
P
Printables
Roco Motoradapter 85060 Glockenanker Motor 1620 H0 / Roco Motor Adapter 85060 Bell-type Armature Motor 1620 H0
Zwei Versionen für einen Adapter für 1620er Glockenmotoren, einmal einfach und einmal mit Halterungen für Entstördrosseln Beides zu drucken ohne Stützen Two versions of an adapter for 1620 bell motors, one simple and one with brackets for…
P
Printables
mjx hyper go 16208 battery holder
The model is designed to hold the battery in place. The front part is designed to prevent damage to the battery in the event of an accident with the RC car. When installing this holder, you need to remove the original holder. Mount the…
P
Printables
Roof sliders for MJX Hyper Go 16208 RC Car
This model was designed specifically for TPU plastic. It molds perfectly to the shape of the body and breaks slowly. Everything is installed in its original place. The cover is slightly larger than the original one, which better protects…
P
Printables
MJX_hyper-go-16208-shock_guard_front
Replacement for the front suspension guard for your shock eye. PETG or TPU reccomended If not lost you can use the replaced screw of the wheely bar ;-) Dont use the same hole like the screw from the front.
P
Printables
Led strip holding clip for @Wayho_1620381 Ender 3 V3 SE Light Bar
Clip to hold your Led strip in case it will unstuck. Fits for @Wayho_1620381 Ender 3 V3 SE Light Bar. Works with 2 mm high Led strips
P
Printables
MJX 16207 Hyper Go Front Shock Tower 16170
Custom-designed strengthened front shock tower for MJX Hyper Go 1/16 scale models. This part is a direct replacement for the stock component and is engineered to fit precisely using the original hardware. Printed in solid with 100% infill…
P
Printables
Bumper for Hypergo Brushless MJX 16207
I remixed another bumper design to better fit the MJX 16207 Buggy. I printed it in 95A TPU on the creality K1 Max. No supports. I made the backmost 48 mm solid, used 25 walls or something like that. The frontmost 13 mm is printed with 2…
P
Printables
MJX 16208 RC car Steering Cup
I had to add a cylinder so that the bearings sitting surface would be smaller. Small mods from the original, but they actually make the model usable. I used it for MJX Hyper GO 16208 Its tested ad it works. i dont know how durable will…
P
Printables
MJX HyperGo 16208 Battery arm
Allows you to use bigger batterys and fix the battery cables Thanks to @RabidBadger_397944 for the first design.
P
Printables
Low Profile MJX 16207 wing mount
A low profile durable wing mount, ideal for street bashing