83 modeli
Plunge router base plate for Bosch model 1617 2.0-2.25 HP router motor. Design based off factory design. (Can add fixed base design, depending on need/interest) This is a work in progress, as I am working on a series of designs and…
This model is compatible with the lego system.
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Vase - Kangxi period (1662-1722) Fixed lack of bottom -and lack of hole at top. Mangled mesh from p-gam. hollowed. Added UV details.
Simple supports for the portable screen Asus ZenScreen MB166. It is meant to be used with the screen horizontaly, and it has the space for inserting the usb-c cable. This model has a depth of 12mm so it might fit other similar models, not…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Intro It was pointed out to me on Reddit that this might be compatible with any other GPU with the “Sunflower” style heatsink that the 1660S Phoenix has, e.g. the Zotac 1650. I've included step by step instructions below. This is a mod…
This is a simple screw-top case designed to hold two CR123 batteries or a single 16650 battery. It's a great way to keep a couple of spare batteries handy for your flashlight or other portable electronic device without the risk of them…
This is a simple battery adapter to "convert" (dimensions-wise) 16650 battery to 18650 battery. My 16650 battery was not tight enough when placed in the flashlight so I decided to make a simple adapter for perfect fit. I printed this with…
This model is compatible with the lego system.
This model is compatible with the lego system.
Guy tried to remove the PCI bracket to get the card to fit in a computer it was never going to fit in, lost the bracket, and wanted to trade it in for a smaller form factor card. I felt bad for the guy so I traded it in and made a bracket…
Replacement for Whirlpool Part Number W11666274.
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
A simple lens cover for both lenses on Lubitel166U TLR. I may add the Lomo Logo eventually. I printed mine in TPU and it works great, with enough flexibility for easy removal and application. The model should fit snugly without scaling. I…
Hate flare ruining your nice film photos or want to make that collectors Lubitel look like it actually works? Look no further than this lens hood. Helps cut down on flare and doesn't show up in photos when printed. Depending on your…
BACK PLATE 3D PRINT 2 COLORS AND LASER CUT TO ADD ARGB LIGHT
45T center Thorens 166 MK2 - Centreur pour 45T sur platine Thorens 166 MK2
A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…
This model is compatible with the lego system.
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
This is a fan adapter to replace the stock CoolerMaster CPU fan with a Noctua NF-A9 PWM in an Acer XC-1660 PC motherboard. This fan adapter converts the 71.5mm stock fan bolt spacing to the larger square shroud on the Noctua NF-A9 PWM at…
This model is compatible with the lego system.
I bought this Ryobi Magnetic Steel Nut Driver Set (6-Piece) from Home Depot many years ago. It came with a cheap bit holder. https://www.homedepot.com/p/RYOBI-Impact-Rated-Magnetic-Steel-Nut-Driver-Set-6-Piece-AR2031/308112736 More…
The model features 2.4mm thick walls, making it suitable for printing with 0.4mm and 0.6mm nozzles. It was designed entirely from scratch! Inspired by: [Thingiverse Design](https://www.thingiverse.com/thing:4878747) Since I required a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** My son has taken a liking to “Cardistry” - artistic…
2025 update After a while the PLA would crack… just reprinted in flexible TPU.. looks good! A few weeks ago we lost the lid to the Tupperware Spaghetti canister. I could buy a new one, but figured it would be easy to model and print. It…
A two piece design allowing you to use a Kiev TTL viewfinder on a Lubitel 166. This is so much nicer using this than the horrible waist level finder and even has a built in meter! This took many many reiderations with it being remodeled…
Spare part for the plastic bushing of the second floor of the Hazet Assistent 166 N tool trolley. Printed on a Formlabs Form 2. When installing, make sure that the sheet metal in which the bushing sits is not bent. Please comment your…
Please refer to the original model's page for more comprehensive details, as the original creator has written an extensive guide about it.
Rack mounting brackets for Netgear 16 ports PoE switch GS3166EPP, with a space for the Power Adapter. Use M3 threaded rods and nuts to keep everything together (although they might be unnecessary, since the brackets already click in place…
I wanted a test lead holder for my FLIR DM166. There is one (TA84) that comes with the DM285 and used to be sold independently but FLIR no longer offers it. I recommend PLA over PETG as there is too much flex with PETG.
I came up with this simple modification for my Lubitel pinhole camera to stop the film door from accidentally opening. With this modification edge of the knob catches on the existing securing pin on the film door and pulls the film door…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
Case for Microsoft Azure IoT DevKit AZ3166 (MxChip). I removed the Azure logo from the original design to make it more casual.
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
Sorry for the long absence! But I'm back, bringing you this model of one of my favorite aircraft. So, I actually modeled most of this one some time ago, but stopped after doing the test prints. It looks great though, so I thought I'd go…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
This is a printable pcie bracket, two slot, standard height, for a PNY 1660 super. I printed using PETG. This should be fine, while gpu temps may get above the 80c limit on the PETG, the air temp coming off the cooler will likely be quite…
A 6x4.5 mask for the Lomograhpy Lubitel 166+ viewfinder. I'm not sure about the compatibility with older Lubitel models. If you have the older model, feel free to try and share the result with other. I created it very thin (3-4 layers)…
Replacement bumper for SB-1664FN Bostitch finish nail gun. Printed with TPU 95A 0.16mm layer height Turn up walls, shell layers, etc. so it prints solid Some support is necessary - print with the skinny flat side on the build plate (as…
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
Accidentaly deleted main file, only have the print in 2 parts. I used this with prusa Mini, glued to the GPU with a sillicon that tolerated over 300ºC
I liked the original number on the face plate so I created one with 166 on it. This is the face plate only and nothing else and goes with Chinlkel's STL files Category: 3D Printing
My WMF Kult X Standmixer broke, but I designed and printed a replacement for the broken part. Works better than before.
Designed adapter allowing to quickly snap-on connecting 46mm filter to lens 52mm outer shell, when used with front thread protector instead of lens hood. It's a very versatile option for e.g. using ND 8x filters with F1.4 aperture during…
Minimal profile, minimal filament. Sized for 18650 with onboard recharging. Specifically, the surefire 18650 will fit, obviously all unprotected batteries will fit. Streamlight rechargable might fit.
Designed for a friend to hold his probes while he is using his multifunction meter, attaches onto the top of the Fluke 1663
ARTE&DISIGN GT166 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Being constantly annoyed with having to hold both Leningrad 8 light meter and my strapless Lubitel 166 Olympic edition during changing light conditions, I had an idea. This is a holder that holds your Leningrad 8 light meter fairly…
hi, i am doing a rework of the wolf cart SV3 at the moment. So i created some of the normally alu/iron crafted parts with PETG. Works fine :)! Happy printing! I did the following version of the part: Original replacement - diameter:…
I love the T-22 lens on the Lubitel 166's but loath the lens flare that comes with it. I've made a lens hood for the Lubitel's in the past but that was only for the taking lens and it doesn't help focusing when the viewfinder is full of…
Purchased a box of assorted Paw Patrol toys for our kids, this one was missing the battery cover, so here's a “good enough” replacement. All the features seem to be offset by 2-3mm, I assume to deter copies/clones. It is strongly…
Double sided replica of grocers token (coin) from Cropredy 1664 17th Century traders token of Margaret King, Grocer in Cropredy, Oxon, 1664 Tricky to print in Silk so I had to slow down the first layer so that small dots around edge of…
This needs to be printed out of tpu, I printed it with 1 wall and 100% infill and workes and feel very good.
ORGANIZZATORE GT166 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
nameplate/nametag for the pelicase 1660. 3mf and stl file so you can add your own text
this parts need to be printed with tpu
US ship-based air defense missile system. Effective against incoming cruise missiles.
ACCESSORY DESCRIPTIONS A base and bin system with rotating posts for an enlarged version (166%) of John Markov's (Deadcat1337) Hex Organizers. [ https://www.thingiverse.com/thing:6771530#google_vignette ]. Included are mini bins that can…
Saw Stop Hacks @ MKE Gadgets #166 If you are like me, when you place a dado blade set. In your Sawstop the over the blade dust collection hood has to be removed. One of my hack is a 3d printed plug for the hose that is left dangling…
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
White Bezel snaps over Seadog 401665 White/Red LED Surface Mount courtesy lights. If the T-Top Courtesy lights are corroding on your World Cat 255DC (and others), this is what you want. Remove the center lense, unscrew the light. The…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
I was building a NAS out of a Thinkstation M920Q and the ASM1166 card was touching some metal when inserted into the PCI-E slot. So I designed a snap on isolating backplate. It holds itself on purely by friction. If you want it to be held…
Tortuga is one of our favorite games and after a brief experiment with lego hats, I wondered what accessories could be made with 3d printing. After fitting a clip and finding a beard, and some trial and error, I now have the most awesome…
Customized version of http://www.thingiverse.com/thing:1655546 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1655546 Instructions Using the following options: phone_depth = 1.8 phone_width = 74…
I wanted to have a stand for the hair clipper where it's upright to keep the charging hole exposed also, you can secure the stand with double sided tape. As mentioned in the summary, this stand is extremely rudimentary and it uses the…
Customized version of http://www.thingiverse.com/thing:1655546 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1655546 Instructions Using the following options: connector_height = 27.8 phone_name = LG G5…
Slots in where the 645 mask would go on the Lubitel 166U and Lomography Lubitel 166+ and allows the user to take up to 24 Xpan ratio panoramic images on a roll of 120 film. [Not usable on other Lubitel models like the original, 2, 166,…
My bike lock adapter part broke off so i had to make a new one. Might aswell share it here if anyone else have the need for it.
This model is compatible with the lego system.
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
nameplate/nametag for the pelicase 1660. 3mf and stl file so you can add your own text
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Famous Art - Self Portrait - Rembrandt - 1660 3D printable model.
Famous Art - The Lacemaker - Johannes Vermeer - 1669 3D printable model.
Famous Art - Young Woman with Water Pitcher - Johannes Vermeer - 1660 3D printable model.
![#0166 Mandalorian Poker Playing Card Case [2 sizes]](https://media.printables.com/media/prints/925001/images/7208882_608aae77-2b3a-4e46-a1d2-6db320f040a0_e2032364-a80e-43c8-bbda-813d5afbff21/20240626_210309-collage.jpg)
