37 modeli
You should eat roughly 30g of nuts every day. This little bowl will give you just that, so you don't have to measure anything. Of course it will depend on many factors (size, humidity,..), but here are some examples: Pecan Walnut Cashew…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Stackable tray to organize Plano 3650 tackle box. Each tray holds 10 one ounce weights. Stack two trays and the lid will keep things from spilling around.
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In Case you need one for the thick version: https://www.printables.com/de/model/638928-ipod-classic-5g-thick-case-with-hexagon-back Deutsch: Ich habe dieses iPod Case entworfen, nachdem ich meinen alten iPod wiederbelebt habe (Umrüstung…
The cooler master MM710 has a good sensor, small circuit board and you're able to get it in clearance most of the time (got mine for 25 euros). This makes it the perfect candidate for making a way cheaper version of the Zaunkoenig m2k…
extra long scoop for my protein powder no digging for scoop no mess
I printed mine with slim tree supports and it came out perfect. If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir
.22 mag for Daystate Air Ranger. will except 40gr 30gr 25gr 22 Zan slugs. Parts Required 1x .5x12x25 spring 1x m4x8 countersunk hex screw 1x m2.5x8 countersunk hex screw 2x 4x2mm magnets Print Settings Printer Brand: Creality Printer:…
The case is based on my parametric “ Rugged Box ” and is resized to fit the Docreate Gear30 Spot Welder . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut…
made it so the scoop can hang on the bag insted of disappearing in the bag
Deutsch: Update: Look here for thick version: https://www.printables.com/model/1053941-ipod-classic-5g-80gb-case-magsafe-edition Anders als bei meinen Vorgängerversionen , handelt es sich hier um ein Case für den iPod Classic der fünften…
Scoops 30g of your favorite protein powder
Side buttons and dpi button is usable with this model. Works for me. Must thank original model author for providing good base model.
I saw someone else post one and it reminded me I always wanted to make one ultra light versatile and vase mode! You print this with 0.4mm and 0.2mm layer height. with a 0.6mm nozzle if you scale it up slightly say 25% it should slice…
Ich habe einen Ring entworfen um ein Hygrometer in einem Ikea Korken Glas Unter zu bringen. Der Ring sollte mit den Gläsern der Größe 0,5L - 2L Kompatibel sein. Ein Boveda mit 30g lässt sich ebenfalls im Deckel unterbringen. Gedruckt in…
Case for the iPod Video slim (30gb model) Make sure you print it laying flat on the back.
I recommend supporting the centre of the handle.
My fancy TPU cover / case / bumpers for a few different charger models. Charger Models so far: The new V4SC from folks like GuLi-EUC or Roger Charger. 105.5mm width, 42.8mm high. HUAWEI Charger R4830G1 from NingNing / houeuc. A common…
For everyone in the family and for potential babysitter to be able to feed our Golden Retriever, I went ahead and quickly came up with simple yet functional design of a cup/scoop to contain up to 130g of mid-sized dog food. Needed…
A Grip for a more comfortable grip on the Fujifilm XT-10/20/30. It is fixated, with a bolt in the 1/4" tripot holder and a 2.5 mm pin through the Holder of the neck strap. Please drop ideas for improvement in the comments
Friend needed this print model modified, so... That's what this is. The cavity on the back is most of the way filled in.
I wanted to design a 80x80x90 stable planter with as less material as possible. That´s my first design. It only needs about 30 g and prints in 2 Parameter on a 0.4 nozzle and has no infill or support. Print Setting: 0,3 Layer Height 0,4…
Please read to the end. Important notes are below: I designed this accessory for the Jetboil MiniMo because I wanted to store the larger 230g fuel canister inside the cooking system alongside the igniter. The original cap didn't allow…
Use to mount ASUS ROG Strix XG438Q Monitor Power Supply (ADP-230GB) on a 35mm DIN rail inside Virtual Pinball cabinet. Use DIN Rail PCB Bracket from ALIEXPRESS or similar with the included screw. PLA Print, 0.4mm Noze, 20% Infill
Had a request to use my ASUS brick holder under a desk. Quickly drew up a new version that should suit that request much better. Print two on their sides, give it 6 walls at standard 0.4mm thickness and it should be solid. Probably fine…
A rack for camping gas canisters (MSR, Jetboil, Coleman, Snow Peak, Primus-type 110g and 230g). Each can hangs from its base rim, the rolled steel lip at the bottom. The rim is wider than the can body, so it rests on two rails while the…
I needed a tray to inspect 30g+ beans, so I designed this tray.
Here I designed a card holder for my wife who has 400+ board and card games because we couldn't find one that checked all our boxes. Most card holders we find online are curved and can easily end up damaging the cards. Others have high…
Removed the magsafe, left a hole for aesthetics, and made the charging port cutout larger to fit the Wymod Aerostream. Printed in TPU
BIG UPDATE I wanted to make my Pulsa lighter, so I built a naked mod. It's still a work in progress, but it's already functional. It just uses the original screws, no extra parts needed. All you need is your mouse and the printed parts –…
Did make battery protection plate to KingKong 130GT quadcopter, when putting battery bottom of quadcopter. Stronger version is 2mm. Category: R/C Vehicles
🧩 The model I made this model for my Qotom Q730G5 S08 that is hosting my opnsense. The dimensions are the following : 155*127*48mm There is only one model but I did upload the Fusion file with all the steps if you want to remove or add…
An easy way to reuse Prusament spools! I have a few Prusament spools laying around, and don't need their full size for remnants of spools I want to offload. This solution let you shrink down the hub and make better use of them! This also…
Replacement part to hold te lid to the bin
I needed a tray to inspect 30g+ beans, so I designed this tray.
.22 mag for Daystate Air Ranger. will except 40gr 30gr 25gr 22 Zan slugs. Parts Required 1x .5x12x25 spring 1x m4x8 countersunk hex screw 1x m2.5x8 countersunk hex screw 2x 4x2mm magnets Print Settings Printer Brand: Creality Printer:…
Rackmount for up to two FortiGate 30G units in 1U
![EUC HyperCharger Bumpers [V4SC, Huawei R4830G1, Alien Rides]](https://media.printables.com/media/prints/515481/images/6374134_e093908d-bf4f-4ecd-87f1-5703d3dc672c_babb4ff6-5f04-4cc9-881b-4423ea002d90/charger-bumpers-title.jpg)
