Liczymy pasujące modele…
This is a magsafe stand for iphone 13/13 mini - other models may fit also. Fits for Anker313 magsafe pad. No supports required, printed in ABS on a Voron Trident with 0.2 resolution.
Use this tool to measure the right distance from the front to mount your doors into an IKEA KALLAX.
Both Rochas313 and Geometry John Doe Skins for the silly fans. :3 Print in PETG or get IMPLAED. Or tree'd idk. (MEGA-UPDATE 11/21/25: Added new joint design)
This model is compatible with the lego system.
I wanted to finally use my Anker 313, so i modified the dock a bit. I still wanted to watch Videos, but in the original version the sound has been cut off, i added cutouts for the speaker and mic.
this is a replica of a license plate lighting bracket for the VW T3 Bully. this is the right side. I'm not sure if the other side is identical. if necessary simply mirror it in the slicer. VW Part Nr: 251943139 print without support. I…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
An iPhone Magsafe stand for the Anker 313 magsafe wireless charger ( https://www.amazon.de/dp/B099WRPVJK/ ). Also works great with an iPhone 15 pro and an original Apple case. And the angle supports the new standby mode like a charm.…
I was getting annoyed that my phone would keep falling off when I got a text or notification. Obviously I could get a magsafe case or not even have a case on my phone, but I said hell no. I popped into OnShape quick and added a little…
I was gifted the Logitech Z313 computer speakers, however the satellites did not fit under my monitor. Laying them horizontally did allow me to use them, but they were quite unstable. Adding this little ‘shim’ holds it correctly in place.…
Compatible with: Extruder: M3313 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S Pro V2 CR-10…
This is a table stand for the Velux Integra radio wall switch KLI 310, KLI 311, KLI 312, KLI 313 to easily plug on it. I did not make this, but i cannot add it as remix because it is not hosted on Printables. All the praise belongs to…
Holder for Anker 313 Magsafe pucks featured in this amazon link (https://www.amazon.co.uk/gp/product/B099WRPVJK/ref=ox_sc_act_title_1?smid=AISREEIOH9TSP&psc=1) Which was a budget friendly alternative to the original Magsafe buck. I get…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
I play a little with the thinkercat and designed a body for an Axial SCX10
This is the substitution of IKEA shelf pin. The genuine code is 131372. Customized for non-support printing without any power loss. Print Settings Printer brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: No Resolution: 0.20…
Réfaction du couvercle rotatif de l'essoreuse MOULINEX 313.0.00 ( 313000 ) Re-design of the top of Moulinex salad spinner MOULINEX 313.0.00 ( 313000 ) Print Settings Printer Brand: DAGOMA Printer: Disco Ultimate Rafts: Yes Supports: Yes…
Informations: This model is designed to play a game of TONKS! if you're curious about this Free game you can find the rules and much more on Apocrypha_Now (creator) linktree page or on the 28Magazine page. BraveLittleBunny Mk B. aka B-313…
This model is compatible with the lego system.
Hello, I made this tray because using the pouch they come with is annoying. The Starrett one someone else has made didn't work for the Mitutoyo set so i made my own lol.
A little bit changed VW 3313 tool for fuel pump timing setup. Tested on VW T4 AJT. Works perfectly Print Settings Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 80% Filament: Verbatim PETG Notes: Print horizontally…
The handle of our Moulinex salad spinner bowl was broken for years. So I created a replacement part. It works now for at least 5 years perfectly. Now I want to share it. It snaps in place with a little force. You cant remove it afterwards…
To add weight, a thicker base was made and filled with concrete. Um das Gewicht zu erhöhen, wurde ein dickerer Sockel hergestellt und mit Beton gefüllt.
Background: I like the Anker 313 magnetic chargers, they have a very strong magnet and can charge my phone pretty fast for a wireless charger. It's designed for iPhone Mag Safe, but I still use it via an adapter plate with my Galaxy Note…
fendt Logo and model number 313, with Gcode for manual switch of filament. in PLA.
chassis new design with conversion for 313mm and new battery tray plus electronic tray. Bumper mounts for custom bumpers that I will make or you can! also will make body mounts for it too or you can! Thanks and happy printing
Created this model to center my Pixel 3 blindly in the dark so that I would not wake up to a dead phone. Depending on the accuracy of your printer, you may need to scale up slightly. Anker 313 charging pad:…
Jedná se o osvětlení SPZ VW T3. Číslo výlisku je 251943139. Model je rozřezán na více dílů a následně je slepen. Packy pro zacvaknutí do karosérie jsou tištěny vodorovně, aby se zachovala jejich pružnost. Výrobek je vytištěn z PETG.
Needed a quick and dirty scan of a speaker to make a mount.
inner fender originally designed for SCX10 III modified for the Injora chassis step 313 the designer and owner of the files is not me but Burnie222 https://www.thingiverse.com/burnie222/designs
When I moved to my new appartment, the first thing that broke was a plastic part of one of my IKEA BERNHARD barstools. As Ikea was not able to provide a replacement part, I went with my 3D printer and created the part myself. Now the…
Fits well enough. Printed in PLA with supports under the overhang. Spare part for Volvo V70 2007-2013 Reference number for spare part 31353583 2
rock slider per telaio INJORA in metallo con passo 313mm composto da due parti regolabili in larghezza (circa min 71mm max 81mm) @il modello "esterno" deve essere specchiato mentre il modello "telaio" non è essenziale data la simmetria…
On my Toyota Sera, my clutch pedal's cushion has long dried and crumbled away. I took some measurements and printed a TPU replacement to place on my pedal. It shares a part number with a wide variety of Toyota vehicles . Print in TPU with…
This model is a simple adapter for the Anker 313 Wireless Charger (Stand) in order to help align the lower than usual charging coil on the Pixel 9 Pro Fold phone. The adapter securely slides on to the wireless charging stand to raise the…
I purchased this body model for an Axial SCX10ii and created some additional parts for it. https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/jeep-grand-cherokee-1977-body-for-print The lights are for the left side only but you…
Both large and small dividers for the Ryobi Link SlotBox PETG suggested because garages/cars get hot Supports required Don't have a 3D printer yet? That's OK, order already printed from… https://jpelectron.etsy.com
the longest piece is only 9.72in long. super easy to print. will have to mirror the mirror for the passenger side of the truck. best printed in PETG and mirror in TPU. my truck is currently printed in PLA and it pretty durable. check out…
Printed on a Creality K1 SE using default settings with Hyper PLA Black 1.75mm
Replacement part for the joint on my "Walimex WT-3131 Basic-Stativ" tripod. Designed in Onshape: https://cad.onshape.com/documents/56650c33d9ff2bc4b6eadadb/w/25c530232c5c8e16d42c6b2e/e/d91081d30246aae3d34dd405 Like the model? Consider…
This is a diffuser specifically sized for the following IKEA Ranarp lamps: 003.313.97 502.313.24 https://www.ikea.com/gb/en/p/ranarp-wall-clamp-spotlight-off-white-50231324/ Print Details: Printed on Bambu Lab X1-Carbon 0.6mm nozzle,…
Flipper of Kenmore French door refrigerator (Model No. 795.71313.310) is prone to failure due to weak part (the failed plastic was lost but I think this may be better than gluing the shattered plastic back together). You can hot glue this…
Hello, I drew a cover for the Wondom AA-AB31392 1000W amplifier. There are two versions of the front cover, one is both with the Wondom logo and the other has two holes for LEDs, one indicates the on state and the other LED indicates the…
This is a heart-shaped lock holder/sleeve/shell for a small MASTER 131D lock. The lock should be superglued (or using another adhesive) to adhere the lock to the shell. Due to the length of the model, this model will require a custom-made…
DON'T FORGET THE BRIM I needed a cover for my yato 3134 drywall saw so i made it :) Blade length: 160 mm I hope you like it :) And dont forget the reviews with photos :) Thanks and have a good day
Puch Maxi E50 - Main shaft gear - 349.313.1200 kick start shaft to a Puch Maxi E50 Engine Part number: 349.313.1200 Module: 1.33mm Putch Circle Diameter: 140.98 mm Pressure angle: 20deg Number of teeth: 106 Helical angle: 20…
Washer lid strike 131390000 touches and activates the lid switch when the lid is closed.
License plate with multicolor possibilities. Each letter and the car logo is created as separate objects - allowing you to select what ever colors you like. Download the “.f3d” file to modify the text. Made as a gift for a friend
A simple knob for the Panasonic EVEQDBRL416B rotary encoder. This encoder used to be available for a low price from Pollin (order no. 240313 ) and has a very unusual shape with a thick metal “axle” that could be used as a knob as-is, but…
print two halves, connect them and you are ready to go.
This is a hotend mount for the HeroMe7 3D Printer Head designed to fit the Microswiss FlowTech (3130) hotend meant for the Ender 3 v3. Recommend printing in PETG at >15% infill.
DeLonghi 5313282411 pulp container coffee maker replacement part Petg
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2AcZoz4fJpe Category: 3D Printing
american style route 313 sign for cable park 313 in Lithuania
Bracket for video intercom QTECH QDM313T
I keep my Logitech Z313 speaker base unit on top of my PC but I noticed that it was restricting airflow somewhat. I designed this stand to lift the speaker by 50mm to allow air to flow freely around it. I made it gothic style because why…
This is a hotend mount for the HeroMe7 3D Printer Head designed to fit the Microswiss FlowTech (3130) hotend meant for the Ender 3 v3. Recommend printing in PETG at >15% infill.
ORGANIZZATORE GT313 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
https://www.amazon.de/Anker-Magneti)sches-Kabelloses-geeignet-Netzteil-White/dp/B099WRPVJK/ref=sr_1_8?crid=2POYDEZ2XLJAI&dib=eyJ2IjoiMSJ9.muVLjKLAIcTQnLMy_uiV43lBgXX6fGgFzU16rr_jq_AFxP8gS41CmCCyU4ooyNVjOp9A_OaqDP9eylkfhiZZvOQhpGGG3rwuKCeXz…
Lego round flat tile 2x2 with hole 15535 or 6055313.
This model is compatible with the lego system.
Adapter to align the charging coils between the Pixel 9 Pro Fold and Anker 313 Wireless Charger (Stand).
Petg print; 0.4 nozzle, without brim and etc.
I keep my Logitech Z313 speaker base unit on top of my PC but I noticed that it was restricting airflow somewhat. I designed this stand to lift the speaker by 50mm to allow air to flow freely around it. I made it gothic style because why…
We were given this palace, but part of a tower was missing so I modeled a new one ;)
I printed this in PLA. The cradle friction-fits into the mounting brackets. If the charging pad doesn't stay in its place, use a tiny bit of hot glue. I should just add some dimples in the design so that the pad snaps in but I'll probably…
Print details: Material: Polymaker PolyLitePETG-teal layer height: 0.20mm Supports: No Infill: 15% [English] I made a holder to prevent the Apple Watch from being remove from magnetic charging dock CHOETECH T313. Prepare a hair band for…
Originally posted to my Thingiverse. I made this because my used Mazda was missing a coaster and the OEM one cost $15.
This model is compatible with the lego system.
HSW accessory to hold an Anker 313 Wireless charger for charging AirPods or other small accessories.
Just a little camera housing to fit a HBV1313 PCB with OV2659 chip onto the right side of any Voron 0.1 / 0.2 extrusion without preloaded nuts. Due to easy printing the 2x clips have to be glued onto the slots at the upper side of the…
I have a few Anker 313 wireless charging stands around the house. They work great with iPhones. Due to the design, they can't charge an AirPods case without an adapter to lift the case to the right spot. That is the purpose of this model.…
This is a wall mount for an European 65mm Wall mount (Standard Switch or Power Plug mount). I put in a AC to 5V USB into the wall, in combination with a Shelly switch to turn On when the Battery is below 20% and Off the charging when the…
Combine with HSW 2x "Insert with M3" Hardware: - 2x M3 Nut - 2x M3x10
changed it so that it doesn't require supports or the melt inserts, and made it a little better fitting for me.
Printed in Filament PM RubberFlex 88. This is a temporary solution if original part is not available. Kohler #25 313 03-S / 25 313 02-S
At work I got tired of people putting De'Longhi scoop all over the table so I designed this holder that can you can mount via double-sided tape of your choosing! In photos you can find for exactly what scoop this has been designed for. No…
My first printables upload! I made this for my 98 Trans Sport because I didn't want to buy new door clips. I hope you like it. I recommend printing it on its side so you can get the supports off easily. Printer Ender 3 V2 Default speed…
Print solid with out supports 0.2mm Drill hole in top case for your srcew
![M3313 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/837537/images/6451803_5213a1a3-439d-4693-8579-b0e2f4eef1d6_6586a5bd-5a76-445a-ad1f-8cdcec2938fb/imagea.png)
