14 modeli
Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html Use 3x M2.5x4mm screw directly on motor rotating cage. Print D35XX pulley, Remove integrated support. (red…
Motor pinion and drive pulley for 3DSets Buggy with a FlashHobby D3530 1400KV Brushless Outrunner Motor. The drive pinion is hollow to slide over the motor shaft. Use a hobby knife to clear the thin cover over the hole for the motor…
3 hole adapter for surpass 3530_V2 engine for 3DSETS SAKURA 240
Adjusted motor mount and drive pulley for the Avian 3530 Brushless Motor. These has a wider pattern vs. the stock parts.
Pinion part for mounting on brushless motors with three screws instead of four. used for 3dsets model buggy / buggster brushless variant while using 3530 motor. Shaft shift is probably often needed as well, after that this mount can be…
A motor mount for plastic antweight combat robotics, modified from this fingertech blade mount https://www.fingertechrobotics.com/proddetail.php?prod=ft-blade-mount in order to fit the motor I purchased. Remix the attachment Point file…
I wanted to use an RCelectricparts 3530-8 1400 brushless motor, but needed to shorten the spline and adjust the motor bracket. I transferred to Freecad, and modified. Freecad files attached. I kept the 2-part spline as the original, but…
原版电机为4孔螺丝固定，DUALSKY 3530为5孔比同规格电机略短一些。后面固定坐也不匹配。 我修改了原文件中的[Pulley 1 - Motor - B] [Motor Mount]这两个，直接替换掉即可使用。
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
EN: Enclosure for Three-pole push switch IP 30, wall-mounted 35303-10 SK: Krabička pre : Spínač trojpólový stláčací IP 30, nástenný 35303-10 Designed for: https://www.emos.sk/spinac-trojpolovy-stlacaci-ip-30-nastenny-35303-10 Print…
the landy 4x4 does not come with a 3 holes adapter to fit the Gearbox Pulley the one I made has 3 holes in Diameter 15mm Radius 7,5mm 3,2mm with 5mm inserts for original screws
If you own a Makita Roebuck Electric chainsaw. This chain tensioner cover is probably broken due to the poor placement on this early model. The area collect lots of dust and likely messes with your chain lubrication. So I decided to…
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
If you own a Makita Roebuck Electric chainsaw. This chain tensioner cover is probably broken due to the poor placement on this early model. The area collect lots of dust and likely messes with your chain lubrication. So I decided to…
