1 / 2
3DSets - Belt Gearbox D3530/D3542 motor adapter/pulley — zdjęcie 1
1 / 2

3DSets - Belt Gearbox D3530/D3542 motor adapter/pulley

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pulley and motor mount to adapt a D3530/D3542 motor to belted gearbox of 3DSet Landy/Rancher/Bamboo

Ocena
0 / 5
Polubienia
16
Pobrania
81
Wydruki
0
Wyświetlenia
553
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html

Use 3x M2.5x4mm screw directly on motor rotating cage.

Print D35XX pulley, Remove integrated support. (red part on screenshot)

Then plug the pulley on shaft aligning M2.5 screw head with 3 holes. Use XZ compensation to have a tight fit. (Used 0.07 hole compensation on BambuLab P1S).

You can use the extended “Box Front D” to mount the D3542. Use the 3dSets original part for D3530.

Build is straightforward.

Tagi