3DSets - Belt Gearbox D3530/D3542 motor adapter/pulley
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pulley and motor mount to adapt a D3530/D3542 motor to belted gearbox of 3DSet Landy/Rancher/Bamboo
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 81
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html
Use 3x M2.5x4mm screw directly on motor rotating cage.
Print D35XX pulley, Remove integrated support. (red part on screenshot)
Then plug the pulley on shaft aligning M2.5 screw head with 3 holes. Use XZ compensation to have a tight fit. (Used 0.07 hole compensation on BambuLab P1S).
You can use the extended “Box Front D” to mount the D3542. Use the 3dSets original part for D3530.
Build is straightforward.