Liczymy pasujące modele…
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 25x25mm Höhe ca 30 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-08 Frank WL
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This is a 5x3 gridfinity bin made to hold about 80 cat tube treats (or anything else you can fit in). The internal dimensions are: Width: 117.49 mm Length: 201.48 mm Height: 94.29 mm
In order to mount a splitterbox to my Ikea lack stack I printed these small brackets. It is optimised for material usage andcan be printed without brim. I used PETG, 20% filling. Please like ! and feel free to donate. Thanks. Category: DIY
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 25x25mm Höhe ca 30 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-08 Frank WL
Easy-access storage for your workhorse screwdriver, including storage for your most used bits. Extra long recess along the main shaft; Even the long bits can stay on. Standard geometry for ferrous FHCS or glued magnets on the bottom.
Holder for a full set of wera miniature / precision screwdrivers plus an additional 0.5mm. This is a bit tight but I wanted it to fit in a 3x5 spot. There was a bit of length left over so there is another wide slot. Nozzles fit nicely there
This holder for a brass brush are only 1x5x3 moduls in the gridfinity system. Can be printet in PLA, PETG ect.
I didn't have any 8x3 magnets on hand, so I made it fit 5x3mm magnets instead. Uses 2 magnets in the base, to make up for the lost diameter, plus are top-loaded, to get the magnets closer to the lid. Chamfered the inside and bottom edges…
I needed a tray to organize my Kill Team miniatures. This one is specifically designed for Murderwing, but it can be used for any team with one 40mm base and five 32mm bases. This my first model. Super simple. Designed with TinkerCAD
🧲 Shuriken Magnet (Remix for 5x3 mm Magnets) A remix of the original Shuriken Magnet — Ninja Weapons by TrocheHole, adapted to fit 5x3 mm neodymium magnets.
🪓 Axe Magnet (Remix for 5x3 mm Magnets) A remix of the original Axe Magnet by Waikikiprod, redesigned to fit 5x3 mm neodymium magnets.
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
4.25x3" card holder with stable base and retention rounds 111 x ~77 x 24.2 mm interior dimension
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
A remix of Flustered's BLLED magnet cover featuring 4 magnets (5x3mm).
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
Collection of set screws (ISO 4028 / DIN 916) including : M5x 4, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
Replacement tray for the Icy Dock 5x3.5" in 3x5.25" Hot Swap SATA Cage (MB155SP-B). This tray does not have the lock of the original tray but fits solidly in the cage.
The 5.45x39mm cartridge is a rimless bottlenecked intermediate cartridge that was introduced into service in 1974 by the Soviet Union for use with the new AK-74 rifle. The 5.45x39mm supplemented and then largely replaced the 7.62x39mm…
I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…
I wanted a simple little shotgun hand cannon that could be used with one hand and fire multiple shots, and so I quickly modeled the “Delilah” barrel. Straight = 0 degree angle Spread = 1 degree angle Extreme spread = 3 degree angle…
Character magnets from legendary metroidvania game Hollow Knight. Remixed to fit 3x5 mm magnets (3 pieces for each head). 2024-11-05 EDIT: Fixed issue with third magnet hole in Hollow Knight's head
So I designed a tray with 30.5x30.5mm holes to mount stuff in my old QAV250 frame, I was to busy to put larger threaded screws, so I made tthis tray for my VTX in this case. --The rod version has 4 rods in place of the holes as seen in…
I have this super weird toothpick build that required me to mount my camera directly on top of my VTX, as I had no top plate and my only mounting pattern available is a 30.5x30.5. This was printed on my prusa mk4, with sainsmart white…
Test your magnet fittings. Offset description in the photo! The corner is the upper right.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This Gridfinity-compatible 5x3 bin is designed to keep your Canon EOS M50 and its essential accessories perfectly organized. Features: Canon EOS M50 Slot : Custom compartment for the Canon EOS M50 body with the 32mm EF-M lens attached ,…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This Gridfinity 5x3 pencil bin is perfect for organizing up to 14 pencils or other similarly shaped items. Designed with a stackability lip , it seamlessly integrates with other Gridfinity-compatible modules, ensuring your workspace…
Box to protect your 7.5" HQ Prop propellers Print witn No support :)
It's the same as my 5 x 308 Blaser bent but without logo. 5 pcs of 308 pocket size. This model is slightly bend. If you need some extra but don't want to carry around with a big box. Designed for ABS. Hope you like it.
It's the same as my 5 x 308 Blaser but without logo. 5 pcs of 308 pocket size. If you need some extra but don't want to carry around with a big box. Designed for ABS. Hope you like it.
Added four holes for 5x3 magnets to @HugoWhite great v2 guitar pick box so I can stick it on a music stand and have it stay in place. Holes should be sized for press-fitting the magnets.
5x3 gridfinity bin that holds the Canon RF 100-400 f/5.6-8 IS USM lens. This works with gridfinity grid system.
A thing to hold the Starrett Extended Length Drive Pin Punch Set (S248). Bin size is 4x5x3.
A non-stackable Gridfinity Container with an Inlay to store the Knipex 31-15-160 needle nose pliers. If there is interest, I could modify this for stacking. This is a two part design like @layercake's Super Knips design, so you can reuse…
A thing to hold Enduro Bearings' Stainless Steel Bearing Bunch Set (BRT-030). Bin size is 4x5x3.
A thing to hold the Noble Wheels Freehub Bearing Extractor Set. Bin size is 3x5x3.
Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…
Simple modification to utilize 3x 15x3mm instead of the 2x 10x3mm magnets.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
UPDATE: //2 of the Mounts had some fitment issues. redesigned and reuploaded those as “Rev2” Dragchain Mount for the StrongholdPro CNC to hold bigger, sturdier dragchains from aliexpress. Dragchains used:…
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…
These models were created for me by Fiverr seller Gaurav Dubey as part of a video project. They allow you to add a 15x3mm magnet to your multiboard, in 3 different ways: Regular Snap Double-Sided Snap Large Thread Choose whichever you…
A wardrobe bracket for a 15 x 30 round rod. To be mounted using 4 mm screws. DISCLAIMER: Neither mechanical nor thermal tests have been done. It is unknown how much weight the bracket will hold. CREDIT: this “thing” is very much inspired…
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
Two wardrobe brackets, left and right, with latches for a 15 x 30 round rod. To be mounted using 4 mm screws. DISCLAIMER: Neither mechanical nor thermal tests have been done. It is unknown how much weight the bracket will hold. CREDIT:…
I measured and recreated an Elgato Stream Deck [5x3] so that I can later use it to design custom mounting solutions to be 3d printed. If you found this useful, please throw it a like. If you notice there are any issues with the model and…
Gedruckt wurde die Endkappe mit 20% Infill, 0.4mm Standard Düse Prusa auf einem MK4s
Gedruckt wurde die Endkappe mit 20% Infill, 0.4mm Standard Düse Prusa auf einem MK4s
Wirestripper holder 5x3 grid, mine is branded skandia. The letters I added in the slicer, so that's not on the model, you can put your own.
This is a 5x3.5" HDD cage for the Cooler Master N400 cage. The N400 only has 2 5.25" slots, but it does have some space above the top slot. A 120mm fan screws to the front of the cage, ensuring ample airflow. I threw this together on a…
Holder or Bracket for a PSU of a ODYS XP32 Screen. Size of the PSU: 55x35mm so it can be used for other PSUs too. No Supports needed!
https://www.ikea.com/gb/en/p/sannahed-frame-black-80459117/#content https://www.aliexpress.com/item/1005002048512739.html?spm=a2g0o.order_list.order_list_main.77.2a881802ZVR2Nl
Marked this NSFW because people have strong feelings about ash trays. Really. Tl;dr version: A cover for a fairly common glass ashtray configuration of 85x38 (more or less) ash trays like those:…
I designed this as a multiple case calibration. Since ive switched to FreeDi firmware ive been learning how the machine works & how to improve it at least for my case. Ive been spending more time tuning & editing the printer.cfg to be…
Trash bin that goes in the CORE One chamber to hold purge lines and other small bits of material. This version has four 5.2 mm x 3.1 mm holes near the corner of the bin area. 5x3 magnets fit fine but should be glued in for good measure.
I needed one for slab nerf gun because kit was wrong. Can properly be resized to the other sizes.
Gridfinity bin for the Parkside electic screwdriver. I'm think it fits most of the electric screwdrivers of that kind because they are all just rebrands. Dimensions of the screwdriver are 195mm*34mm*35mm. If you test this on a different…
Replacement for a broken Ink Disk Ratchet compatable with an Adana 5x3 letterpress. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Infill: 40% Filament: Generic PLA Notes: . Category: Parts
Schaltergehäuse für Snap-In Kippschalter zur Befestigung von unten oder oben. Gedruckt in PLA, 0.22mm, 30% Infill (Grid) Zum drucken auf den Rücken drehen, dann ist kein Support nötig. -------------------------------------------- Switch…
A Gridfinity tray for Apple Pencil (1st Gen).
Made it just for fun. Looks good I guess. I made it in PLA but feel free to make it in other materials.
This is just a slight modification of the original design to use with 5x3 magnets.
Great holder for all kinds of items - clothes, keys, bags etc.
dimensional test cube, it can calibrate printer and profile for optimal dimensions
Great holder for all kinds of items - clothes, keys, bags etc. For this holder you have to use some glue or double-sided tape.
Remix of Alans mount to fit a 15x30 chain. This fits this chain from Amazon. https://www.amazon.com/dp/B0BY8H1LNS
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
I really like Phil Caruso's Magnet Insertion Tool, and I just started organizing my 3D printing tool area with Gridfinity. So obviously I needed a bin for my two copies of the tool, too, but couldn't find one just yet. It's my first…
Holder was made by scanning perimeter of stripper (IEK). Also added only thing that fitted in space - screwdriver, but there is place for something else - you can modify model and add something else!
Please refer to the original model for the detailed description: https://www.printables.com/model/154769-nozzle-box Please make sure you have added a pause to insert the magnets.
Just a simple 15 x 3 bit organizer. The back row has deeper pockets for slighly longer bits. Gets attached by 3 (or2) screws to a flat surface or just stands on your desk. I printed in PETG 15% infill 0.4mm nozzle 0.2mm layer height…
Simple template to route out recess for hinge Habo 571 version 115x33
This Gridfinity-compatible tray is designed for the Parkside PMS160 delta sander but also fits many other delta sanders of similar size and shape. It offers a clean and compact storage solution for your tool cabinet—no more loose cables…
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 2mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 3mm² cable M4 screw holes
This is a remix of the model from Chris with the only difference that the magnet pockets are slightly reduced to fit 5x3mm magnets that I had already from a previous project.
![Elgato Stream Deck [5x3] Reference Model](https://media.printables.com/media/prints/117694/images/1147728_39b98eb0-b94d-411a-9fe2-0a8a8ae65f1f/f4c9dcbe-104c-4229-895f-52dfb1229977-2.png)
