Liczymy pasujące modele…
A pulley hub for F695-2RS bearings. The overall width is 9 mm. May need tiny amount of support on the bottom surface, but might not be necessary. Can print in whatever material you want, this part shouldn't be near any of the heat of a…
This model is compatible with the lego system.
I made a holder/bracket for the 3A0972695(A) VW OBD socket used in most VAG cars. Fusion 360 file included so you can modify it for your needs.
Easy to print and assembly disk caddy for gen8 and 9 HPE proliant. (Possible 10, 11 and 12. But I can not guarantee compatibility because I don't have access to anything else than 8 and 9 gen.)…
Some cover to hide the chrome. Pair them with plastic dip paint to get a nice black matt finish.
This model is compatible with the lego system.
Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Trays for the Harbor Freight PITTSBURGH Impact Socket Set (Metric). The original model is one continuous unit, but to make it easily printable and more modular, its offered in 2-piece and 3-piece options. Each tray has a gridfinity height…
This model is compatible with the lego system.
Print setting recommendations: Make sure bridge supports are on for the top piece Print with the outside down Print in a high temp filament in case your keys get left in the car or sun (i used ASA) When disassembling your remote I suggest…
Poussoir de remplacement pour robot KitchenAid.
My Voron V2.4 contains two dozen F695 flanged bearings. I found that some failed after less than a year, simply because they had run dry. It seems that many economy bearings come with a very low amount of grease inside and will run dry…
This model is compatible with the lego system.
This model is compatible with the lego system.
Sea-doo shock end 269501717. Designed for a plastic insert that can be bought from Mcmaster Carr or other online retailers. https://www.mcmaster.com/94459A190/
This is a prototype of a door handle with strap to get a « GT3 rs » door handle look on a Abarth. This is a work in progress file that will break at the first use. The only thing is that I designed the door handle a bit too thin : The…
A 695 logo vectorized from an image on the web. There is two version, one is carved and is designed to be used with epoxy resin.
This model is compatible with the lego system.
This model is compatible with the lego system.
Knipex 169501 Holder screws on with M3 screwsKnipex 169501 Holder screws on with M3 screws
This model is compatible with the lego system.
Briggs & Stratton 794696 695756
my Tronxy C5 modifications - Increase the 3D print quality... Print Settings Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Custom Section Category: 3D Printer Parts
Seat Mount, Indian, Part 5139695. Replaces https://www.indianmotorcycle.com/en-us/shop-parts/5139/5139695/
Notice : I am not a dog and I share my best 3d designed free to print. Please if you want to sell them, contact me and I am sure that I can provide you a very fair price for a commercial license. Theses rally / rallycross inspired lights…
Neulich im Repaircafe wurde ich gefragt ob man mit den ständig kaputt gehenden Deckeln für den Duschablauf nichts tun könnte, da habe ich eben mal anhand der kaputten Vorlage ein Modell des Deckels erstellt. Gedruckt habe ich das erst mal…
This model is compatible with the lego system.
Printed mine 100% infill in PETG, looking good so far and the bike feels smoother even, I think mine has had metal on metal for a while. Onshape link if it needs modification. Photo has whats left of the old one in foreground, new slipper…
replacement for Babyliss e695e spring holder
Siku LKW mit Absetzmulde 1695
Some Plugable vertical docks like the UD-6950Z aren't exactly designed to be positioned horizontally (or even vertically in a smaller foot print). To address this, I designed a more traditional box shell to accommodate the dock as well as…
This case fits 10 F695 bearings. 3mf file already includes modifiers for speed and quality. Layer height on tube is 0,24 mm, on thread it's reduced to 0,12 mm. After print, try screwing the lid on few times and clean the case before…
I have been holding my spools on a piece of PVC pipe for several years now (https://www.printables.com/model/433471-diy-filament-dry-box-simple-cheap) and it was annoying removing the entire pipe and wrangling spools around to re-dry my…
IMPORTANT : Model untested Cutter block with 695 brearing, compatible with CFS and third party cutter Cutter : https://www.printables.com/model/1444390-k1k1ck1maxk1se-k1-series-filament-cutter-magneto-m
K3 style door setup for 1515 extrusion using F695 bearings. Might feel a bit oversized for a V0 size machine.
Theses pods can be 3d printed in ASA with magnets enclaved for the 3d printed cover. They use a generic Chinese lamp that you can find on various seller. Let’s be honest, it’s not Tuningarts.uk carbon fiber pods with PIAA xenon lights,…
Printable double shear stepper bottoms. I modified the Nebula stepper bottoms to friction fit a 608zz bearing. If your stepper shaft is long enough, it should slide right in and give you double shear. I also made adapters for F695-2RS…
Printed mine 100% infill in PETG, looking good so far and the bike feels smoother even, I think mine has had metal on metal for a while. Onshape link if it needs modification. Photo has whats left of the old one in foreground, new slipper…
Easy to print and assembly disk caddy for gen8 and 9 HPE proliant. (Possible 10, 11 and 12. But I can not guarantee compatibility because I don't have access to anything else than 8 and 9 gen.)…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The Racing Sparrow RS Ranger is a 695mm long 3D printed radio controlled model yacht designed for smooth sailing and relaxed fun on the water. This affordable, easy-to-build boat is ideal for anyone looking for a simple and enjoyable…
This model is compatible with the lego system.
Remixed to use commonly used Voron F695 Bearings
This model is compatible with the lego system.
Trays for the Harbor Freight PITTSBURGH Impact Socket Set (SAE). The original model is one continuous unit, but to make it easily printable and more modular, its offered in 2-piece and 3-piece options. Each tray has a gridfinity height of…
This model is compatible with the lego system.
The Racing Sparrow RS Ranger is a 695mm long 3D printed radio controlled model yacht designed for smooth sailing and relaxed fun on the water. This affordable, easy-to-build boat is ideal for anyone looking for a simple and enjoyable…
https://www.patreon.com/posts/61576511
Saw various knobs for sale in internet, so I created my own free version. Fits perfectly.
The inner hole is 6mm so it won't touch the shaft. Print with seam-position “random” to avoid a seam. Enable “thin walls” Arachne perimeter generator (Default in any slicer made after 2023) is beneficial Please like and post makes!
![PITTSBURGH 1/2 in. Drive Impact Deep Socket Set (Metric) [69561] (Gridfinity Options)](https://media.printables.com/media/prints/caebbc55-3c7a-4b3a-9ad9-a43a95afb491/images/10795587_78370f01-bb0a-4c6e-824e-d9d613e123d0_1807a78c-8961-4db9-8396-9e59f0475daa/pittsburgh_deep_impact_sockets_metric_69561_screenshot.png)
![PITTSBURGH 1/2 in. Drive Impact Deep Socket Set (SAE) [69560] (Gridfinity Options)](https://media.printables.com/media/prints/3333bc54-ee12-4bf1-8d63-2e45d093faaa/images/10795543_8194691c-c039-4127-82a5-b5571bb840ad_50e3b2e4-e001-4fe2-9455-f7502d6468ff/pittsburgh_deep_impact_sockets_sae_69560_screenshot.png)
