Liczymy pasujące modele…
Československý motocykl vyráběný v letech 1935-1946. Motorka měla tradiční černé barvy, verze Special se lišila chromovanými detaily a ráfky. Pozdější verze měly nožní řazení, z počátku výroby se dodávalo řazení ruční vedle nádrže.…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
7 different versions of small parts bins for the famed Harbor Freight portable parts storage cases (#93928). These portable cases are the best you can buy for the money right now compared to the much more expensive Sortimo cases and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
VW Emblem 1939 für VW T4 Heckklappe zum ankleben. Ich habe zum befestigen PU Karroseriekleber von Berner.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
SCP 939. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
LEGO Mercedes 170H (1939)
I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer
Gone with the Wind - 1939 3D printable model.
Gone with the Wind - Scarlett O'Hara (Vivien Leigh) - 1939 3D printable model.
Gone with the Wind - Rhett Butler (Clark Gable) - 1939 3D printable model.
Iconic Movie Villains - Wizard of Oz - Wicked Witch of the West - 1939
Iconic Movie Moments - The Wizard of Oz - On the Yellow Brick Road - 1939 3D printable model.
This is just a simple tray to make it easier to store this when I'm not using it.
Iconic Movie Moments - Gone with the Wind - Frankly Scarlett, I Don't Give A Damn - 1939 3D printable model.
Hi, this is a case for the Waveshare 19399 2.13inch e-Paper Cloud Module. The case has space for the module itself as well as for a battery, which fits underneath. There are cut-outs for all buttons and ports. I have created 3d printable…
Gone with the Wind - Tara Manor House - 1939 3D printable model.
LEGO Peugeot 402 (1939)
LEGO Graham Paige 1939 Cabriolet
Seal can be pushed with old or new nut. When the tool is fully in, the securing part of nut is still outside of thread. FTC4939 text was added in PrusaSlicer. FreeCAD file attached. I used PETG, 4 perimeters, 30 % infill.…
Gone with the Wind - Mammy (Hattie McDaniel) - 1939 3D printable model.
In the beginning of the year 1938 the racing team of Auto Union had to face a difficult situation: The contract with Ferdinand Porsche was cancelled, and Bernd Rosemeyer was killed in an accident in January trying to break the speed world…
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage container, number 93928. I found myself needing more of the smaller bins or smaller spaces for short counts on longer screws so…
Gone with the Wind - Prissy (Butterfly McQueen) - 1939 3D printable model.
This is the first step in printing my own bins for the Harbor Freight Storehouse cases (items 93928 & 93929). Right now I have only made the small & medium bins (55x40mm and 110x40mm at the rim) as a proof of concept. I didn't want to…
Polikarpov I-153 ' Soviet fighter, 1939 Category: Vehicles
Has a little slot in the bottom for the tab and recess in back for the belt clip. Other tape measure holders I found didn't quite fit mine so here is one that is exactly right if you have the exact same tape measure.
Iconic Movie Posters - The Wizard of Oz - 1939
Vickers Medium Mark II(1925-1939) Category: Vehicles
ŠKODA POPULAR Monte Carlo (1936-1939)
A tight fit, especially the power switch. I'm including some basic 2" spacers and the step file, so you can make any necessary modifications.
Tisk opět na dvě poloviny, podpěry jsou potřeba, PLA, výplň 15%, tryska 0,4.
These bins ( http://www.thingiverse.com/thing:1148577 ) were perfect for my HF storage box, but I needed a larger bin for my Pocket-Tactics trays. Works in Harbor Freight 20 Bin storage container (93928 & 62778) and Stanley equivalent.…
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
Protective cap for socket HD16-9-1939S
Automobil Praga Alfa ze sbírek Muzea PČR. Jde o specielní policejní verzi z r. 1939
Support pour valises de Ducati 939 SuperSport Wall Suitcase holder Pour vis de 4mm à tête conique Paramètres d'impression PLA Gyroïde 20% remplissage
A USB storage box that looks like a Power Xpert 9395 UPS with LCD touchscreen HMI. It can store up to 5 USB thumb drives. Possibly a few more if you're nasty.
This is a remix of the blank IO shield from geerlingguy for the ASRock 939Dual-SATA2
I wanted an easy to access hardware box that matched the parts boxes that I use for my 3d printer. Harbor Freight does not offer one in this size/type with more than 20 bins. (Hence, I designed this mod) By replacing the bins that came in…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x140mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm…
Slovenský Štát 1939-1945
I needed a version for five nozzles, so I changed @elmo2k3's nice design to this size. Since the overall width was very close to the width of the hot air station, I added two mounting brackets that are screwed to the nozzle holder with…
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Replacement part FERCO 18939 I recommand to print in NYLON or ABS. Printing in PETG works well. The standard model is 9mm height. The slim model is 5,5mm height. Print Settings Printer Brand: Prusa Printer: I3 MK4 Rafts: No Supports: No…
These are the two Batman emblems that were depicted on his uniform in 1939. The very basic one is from Detective Comics #27, Batman's debut. The second, with bat ears was used from the next issue and in to 1941.
This is my remix of Nmr2d2156 's YIHUA 936 - Pegboard Holder that I modified to fit my 939D Soldering Station. Mounting holes are for 1" spaced pegboard and I used M5x14mm screws and nuts to mount through the back. Changes from the…
Ich hatte selbst das Problem, dass mein Siku Control Fendt 939 Vario zwar noch Gas gegeben hat, aber nicht mehr gefahren ist. Die Ursache war die Rutschkupplung im Getriebe. Das dort verbaute Kunststoffzahnrad scheint mit der Zeit zu…
A set of rails to protect the buttons and connectors on an MFJ-939 tuner. You can either print each rail as a single piece (if your printer is big enough), or you can print the front and back half separate and join with the bracket and…
PCB mount for Copperhill SAE J1939 ECU Simulator Board (or any PCB with 3mm mounting holes 42mm x 45mm on center. (See images for dimensions) https://copperhilltech.com/sae-j1939-ecu-simulator-board-with-usb-port/ Mounting holes are…
I could not find any wall mount for the 9396 helicopter set. I therefore created this wall mount. The bracket is quick to print and does not use much material. When the helicopter is mounted, the wall mount nearly invisible. I used ABS…
This is a replacement of the original part that is not individually available for purchase. This part is directly mounted to the aquadimmer 47364000. Part of the set GROHE ATRIO 19399000 When installing, you might need to force a bit or…
British Interplanetary Society Moon Rocket + Moon Lander Sources: Youtube Video: Only a Paper Moon: The British Interplanetary Society's Lunar Spaceship by Spaceflight Histories Magazine Article: To the Moon in a Space Ship, Newnes…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
I wanted an easy to access hardware box that matched the parts boxes that I use for my 3d printer. Harbor Freight does not offer one in this size/type with more than 20 bins. (Hence, I designed this mod) By replacing the bins that came in…
This model is compatible with the lego system.
Tisk opět na dvě poloviny, podpěry jsou potřeba, PLA, výplň 15%, tryska 0,4.
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
This is a replacement of the original part that is not individually available for purchase. This part is directly mounted to the aquadimmer 47364000. Part of the set GROHE ATRIO 19399000 When installing, you might need to force a bit or…
Polikarpov I-153 ' Soviet fighter, 1939 Category: Vehicles
I could not find any wall mount for the 9396 helicopter set. I therefore created this wall mount. The bracket is quick to print and does not use much material. When the helicopter is mounted, the wall mount nearly invisible. I used ABS…
This model is compatible with the lego system.
The Iron Cross of Nazi Germany. Suitable for cosplay. For better printing, increase the X and Y axes in the slicer by 158%. Set the Z axis value to 5mm.
Gone with the Wind - Rhett Butler (Clark Gable) - 1939 3D printable model.
Gone with the Wind - Scarlett O'Hara (Vivien Leigh) - 1939 3D printable model.
Gone with the Wind - Mammy (Hattie McDaniel) - 1939 3D printable model.
Gone with the Wind - Prissy (Butterfly McQueen) - 1939 3D printable model.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
![Display Stand for LEGO 6939 Saucer Centurion [last update 17.04.2024]](https://media.printables.com/media/prints/846838/images/6516442_01083857-24be-44f5-afb7-0bbf4e2f75a4_587afe86-0830-412f-a8da-da48cbc59a1c/6939-1.jpg)