Liczymy pasujące modele…
Most of what you need to know about this game is found at boardgamegeek link below https://boardgamegeek.com/boardgame/949/twixt Rules are also found in one of the pictures above. The original game was designed to be split into 4 8"square…
Wydruk około 9,94 €–12,15 € nettoWstępna wycena jednego wariantu
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Own a piece of motorsport legend with this 3D printable STL model of the Ferrari 250 GTO (Series I) 1962. This legendary race car model is perfect for automotive enthusiasts and motorsport fans looking to display a pinnacle of classic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This autoclip is applied in the car, truck and other vehicles industry. With an OE clip, panels, strips, bumpers and other parts are connected to each other or the chassis of the vehicle. Often the clip breaks when discontinuation of…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO PORSCHE 962 Convertible
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
1962 Ford F100 Unibody, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
This model is compatible with the lego system.
Quick and dirty remix of the holder by Bjorn_448100 to fit on the multiboard system.
Lawrence of Arabia - T. E. Lawrence (Peter O'Toole) - 1962 3D printable models.
This figure is based on king kong as he appeared in the 1962 film, king kong vs godzilla. Specifically of his appearance during the final battle where he fought godzilla. And this figure was also based on Tell it Animated’s amazing…
Lawrence of Arabia - Prince Faisal (Alec Guinness) - 1962 3D printable model.
Einsatz mit 24 Fächern für die "alten", kleinen T-Loc Mini Systainer. Insert with 24 compartments for the "old", small T-Loc Mini Systainers. Passt NICHT in die neuen Festool Systainer³ SYS3 S 76 NOT compatible with Festool Systainer³…
Lawrence of Arabia - Sherif Ali Ibn El Kharisch (Omar Sharif) - 1962 3D printable model.
The Virginian - Virginian (James Drury) and Trampas (Doug McClure) - 1962-1971 3D printable model.
This is my new and improved 1962 king kong figure. This model had been abandoned for a while, but I finished it. I hope you like it!
After breaking the insert plate on my band saw, I figured I'd spend the time to remake this part vs buying the OEM replacement . This fits the WEN 10" Band Saw, model number 3962, but I've also included a fully customizable Fusion 360…
You can insert the pliers into the cap with the locking lever deactivated — the cap securely holds the pliers in the closed position. When you take out the pliers, the locking lever is activated by friction. I also designed a double sided…
My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…
Lawrence of Arabia - T. E. Lawrence (Peter O'Toole) & Auda Abu Tayi (Anthony Quinn) - 1962 3D printable model.
Price Pfister should replace these for free, but I didn't want to wait so I designed my own wingnuts as my originals have mostly broke and failed. I printed this in PETG. Also if you don't want them so snug you can always increase the…
The Johnny Carson Show - Ed & Johnny - 1962 3D printable model.
The original part breaks, warps, and sticks. This improved part sticks less and should hold up better. The fillets and struts are designed to reduce turbulence and thus noise. Apparently PETG holds up better than PLA in chlorinated water.…
96238218 Bush Select for gear shifts to repair your car when the shifting is broken.
This is a harness or vacuum hose clip for the Z31 300ZX, but I'm sure Nissan used it on other models. Apparently these are NLA and people want them, so I made a copy. PN#: 14962M or 24220B0701 Category: Automotive
This is a prototype 3d printable figure of king kong, as he appeared in king kong vs godzilla 1962. I am new to 3d modeling so don’t expect too much.
Windshield Wiper Arm Nut Cap Replace part for GM 96262507 M12 nut Made for Chevrolet Spark 2009
Ferrari 250 GTO #1, Luigi Chinetti, N.A.R.T. chassis #3987(1962)
TPU Protective cover for the Milwaukee 2962 M18 1/2” impact wrench. This set is comprised of three files. A front nose-piece, a rear cover, and a fastening pin, a pair of which secure the two covers together. The pointed end of the pin…
Tisk tohoto modelu opět na 2 poloviny, výplň na 10%, PLA, tryska 0,4.
A detailed 3D model inspired by the iconic American luxury convertibles of the early 1960s. The model features a long classic body, distinctive tailfins, detailed front end, headlights, grille, and a vintage interior. Printing Information…
Originally published here: Mars 1962 reconstruction scaled one in sixty million by tato_713 - Thingiverse This is a recreation of what the scientists though it was Mars before the first missions arrived to it, the Mariners. The model was…
Apple remote controller holder for A1962 Category: Organization
Iconic Movie Villains - Whatever Happened to Baby Jane - Baby Jane Hudson - 1962
Tisk v úhlu (tentokrát celý najednou) s podpěrami, výplň 10%, tryska 0,4, PLA.
Door courtesy/interior lamp lens for 1974-75 Imperial & 1974-78 Chrysler. Mopar Part #3488 962 (3488962). Original designer: Chrysler Co., Detroit MI. No aftermarket part available. Fastening tabs seem to break easily on original ones.…
French: Je voulais gagner de la place en empilant mon générateur de fonction sur mon oscilloscope. Je trouvais aussi que l'aspect du générateur était un peu fade et améliorer son look.: https://www.thingiverse.com/thing:4967172 Utiliser…
I wanted a better look for this function generetor, once printed, just apply it on the front cover, I even didn't need to use glue, it hold in place by itself (at least mine, overwise you can put some paper glue) Print Settings Printer:…
Multi-color print of Picasso's "Woman Sitting in an Armchair". This was designed in the Graphic app for iPad and Fusion 360. Category: Art
Print & assembly! Category: DIY
Printed in PLA at 210 C, medium setting of the Dreamer. The Robot still need's to be painted and detailed. But it is a gift for a friend that grew up watching this show and wanted the robot. I made the 3d files in Design Spark Mechanical.…
for them game crash derby
Soviet tractor Kirovets 700A from 1962
Easy DE-CALC nut replacement for a Philips Elite GC9625 Steam Generator Print with supports - Rotate model upside-down to print
This simple holder is designed to be printed in rigid filaments like PETG, PLA or ABS, unlike the original model by @Yurshevich_387032 . Instead of a belt mount it has two holes for screwing the holder to something with M5 rounded head…
Behold!! A two part case for the A1962 remote, it will work fine with out the TPU outer case but I figured… I probably should make it one because apparently my kids think it’s a toy to run around the house holding... and dropping...until…
Updated version #2 Changed some joints to threads - make assembly easy and more durable Print Print up to 21h + 400g PLA Upscaled Utensil Radio - A Nostalgic & Interactive Desk Companion! Inspired by variant 3962b Bring a piece of classic…
Own a piece of motorsport legend with this 3D printable STL model of the Ferrari 250 GTO (Series I) 1962. This legendary race car model is perfect for automotive enthusiasts and motorsport fans looking to display a pinnacle of classic…
Tisk tohoto modelu opět na 2 poloviny, výplň na 10%, PLA, tryska 0,4.
The Johnny Carson Show - Ed & Johnny - 1962 3D printable model.
The Saint - Simon Templar with Volvo P1800 - 1962 3D printable model.
The Jetsons - George, Jane, Judy, Elroy, Astro and Rosie - 1962 3D printable model.
Door courtesy/interior lamp lens for 1974-75 Imperial & 1974-78 Chrysler. Mopar Part #3488 962 (3488962). Original designer: Chrysler Co., Detroit MI. No aftermarket part available. Fastening tabs seem to break easily on original ones.…
Updated version #2 Changed some joints to threads - make assembly easy and more durable Print Print up to 21h + 400g PLA Upscaled Utensil Radio - A Nostalgic & Interactive Desk Companion! Inspired by variant 3962b Bring a piece of classic…
The Virginian - Virginian (James Drury) and Trampas (Doug McClure) - 1962-1971 3D printable model.
The Bentley has an extra spare tire on the driver's side, but the spare tires aren't actually attached so you can just leave off the extra tire and glue the other spare to the car. And you'll need to improvise for the axles on the Lotus. :)
Lawrence of Arabia - T. E. Lawrence (Peter O'Toole) - 1962 3D printable models.
Lawrence of Arabia - Prince Faisal (Alec Guinness) - 1962 3D printable model.
Lawrence of Arabia - T. E. Lawrence (Peter O'Toole) & Auda Abu Tayi (Anthony Quinn) - 1962 3D printable model.
Lawrence of Arabia - Sherif Ali Ibn El Kharisch (Omar Sharif) - 1962 3D printable model.
