Liczymy pasujące modele…
UPDATE: -Added 3 new sizes: 96mm, 128mm, 160mm hole spacing -The 130mm is not a standard size I guess it should be 128mm, so measure twice, print once. This is an IKEA-style kitchen door handle made for 130mm hole spacing. Please measure…
Small drilling template for 96mm door handle from Ikea. Can be used to drill holes in the right spots. 30mm, 40mm and 48 mm from the top of a cabinet door. Used it for drilling holes for a handle on the front center top of the dishwasher…
Da bei meinem Intex ZX300 Poolsauger nach jeder Saison der Antriebsriemen für die Reinigungsbürste das Zeitliche segnet und man von Intex keinen Ersatz dafür bekommt habe ich mal einen Riemen mit dickerem ‘Rücken’ gezeichnet und in TPU…
I was looking for a modern minimalistic door handle to change my ugly old ones in my kitchen and found this model by Wout Peeters, but the problem was that his model had a 128mm screw-hole spacing, I needed one with 96mm spacing. Tried…
The pitch is 96mm as that were the holes on my drawers. If you need different size, you can use the f3d and step file or you can send me a message and I'll reupload with different dimensions. The orientation of nut hole is ideal for…
Hello folks I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own. This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame…
Cover works on all box versions. UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25: Added Bridge 196 V6 and bridge support lower and upper for 2X T114 and 3065. UPDATE: 2026-05-08: Added Bridge (double antenna for two…
Cabinet handles with standard 96mm hole distance. Screw holes are 3.75x30mm and should be self-tapping with M4 bolts.
This bigger version fits some slightly larger but common 7-piece dice sets. See my previous remix (based on 3DCentralVA's and the same size as that one) for other changes. Printing tips: Tray: The version of the tray marked "support-free"…
This is a cupboard handler with a center distance of 96mm Poignée de placard avec entraxe 96mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Category: Replacement Parts
Features cushioned corners to absorb impacts. Printed with Duramic3D TPU (95A) on a Creality K1C. Print time ~4.5 hours. Dimensions: 50mm Tall 99mm Outer Diameter 96mm Inner Diameter 1.5mm wall thickness 4mm bottom thickness Recommended…
Any Material works, no supports needed. ✅ Hole spacing (C/C) after research these distances should be IKEA-compatible for the most part and for other furniture as well. These models match the distance from center of one screw hole to the…
Strong handles primarly for 2020 extrusions, using m5x20 screws. As it uses the 32mm steps for the screw distances, it can also work as standard handles. 2 sizes uploaded. 96 and 128mm screw distance (overall sizes 116mm and 148mm). For…
The project was my own, because I couldn't find one dimension on websites with 3D prints.Download, print, you will like it, LIKE.
Wallmount for the Backfire G2 Black, Print 2, and space accordingly
Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…
Printed @ 50% Infill w/ 5 perimeters for strength. 96mm hole distance Holes included for M4x8x6 heat set threaded inserts.
96mm center to center toe link, modeled after Traxxas 9189. You will need "hollow balls" and press them in. I reused my
A drive shaft (front and rear) for the model GS-racing shadow st-1 RTR
Designed this template for 96mm handles to be mounted on IKEA Sannidal cupboard doors
Our screw-cap of the Water container (with a submerged pump) broke and needed replacement. I designed this in Fusion 360 and share it here in case anyone needs it as well for their own needs. The Innerdiameter of the cap (excluding the…
Zarážka pro stůl MDF 20-96mm/MDF table stop 20 / 96mm
Just a simple design I made some weeks ago for my IKEA doors in my studio
Recommended to print in the orientation it'd be fitted (on the skinny bottom face, with the pegs facing sideways). I printed it in 68D TPU but I imagine PETG/Nylon/et c should also work.
With an area to mark the contents. Holds tight.
Cover works on all box versions. UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25: Added Bridge 196 V6 and bridge support lower and upper for 2X T114 and 3065. UPDATE: 2026-05-08: Added Bridge (double antenna for two…
Designed this template for 96mm handles to be mounted symmetrically on IKEA Grimo wardrobe doors
Recommended to print in the orientation it'd be fitted (on the skinny bottom face, with the pegs facing sideways). I printed it in 68D TPU but I imagine PETG/Nylon/et c should also work.
I have bought cabinet with very flimsy handles so the quickly broke off. SO I have copied the same design and printed in PLA. They came much stronger out than expected.
You'll need M4x12mm screws. Link to screws: https://www.amazon.com/dp/B07ZPS7SDD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=
I use this Fan Adapter for connect a 90er Fan into a 100mm Spiral Ducts. The tube is outside only 96mm for space for a foam seal. Hole distance from fan: 82x82mm Hole distance from fan inside: 87mm Tube to plug into: 25mm
This is for my laser exhaust that goes to a vent outside my window. It works fairly well and is a nice, not too tight yet not too loose fit. Exhaust fan:…
This is a 96mm diameter wheel used for robotics / RC vehicle projects. It is made of two parts : the wheel which can be printed using PLA or any other material the tire which must be printed using flexible material The wheel is attached…
With an area to mark the contents. Holds tight.
Designed this template for 96mm handles to be mounted symmetrically on IKEA Grimo wardrobe doors
door handle with print pause to include M4 nut Print instructions print 0.2mm PLA with support turn hole to the top layer. Stop the print (color change) at layer 137 or 16 mm to place the nut.
I wanted a tray to use with a dice tower I printed to prevent the dice from going all over the place. The dice tower is this one https://www.printables.com/model/343681-segmented-dice-tower-v3 - which is 96mm in diameter. Nothing special…
I needed some handles for my cabinets that never had ones (no idea why). I keep learning FreeCad with stuff like this, but I find I'm far of being able to do what I had in my head. That's why I went for a quite simple design and ended…
Took more time than I will ever admit to make this simple handle but got the approval of the 3 women of the house :D Went with Carbon Fiber PLA because the look it has and they wanted black. 96mm between holes. Made to use with M3…
