Liczymy pasujące modele…
Add a pause at 8mm and push in a 1/4-20 nut. Make sure it is recessed below the current print hight. I printed mine with prusament PC-CF, .2mm, 5 walls to make the outer wall solid. The lock bolt that comes with the mount will thread…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed “Bambu Lab A1 Mini - Rotary Spool Holder Adpater” for the original product Bambu Lab Rotary…
I really like this mount the only problem is this adapter. I'm on my second full mount because this same piece breaks due to sun damage. The four threaded sides on the “bolt” portion of the adapter fail. Hopefully this saves you $20 like…
If you are not using the spool holders, the adapter allows the attachment of a Honeycomb Storage Wall (HSW) to the side for extra storage. Included is a hexagonal HSW grid that works well in the space. Of course, you can print out your…
simple fan adapter 40 --> 80 mm Category: Electronics
M6 Hex Cage Nut Holder/Adpater Fits a M6 hex nut to use as a cage bolt, other models didn't suit my rails for some reason (these rails https://surplustronics.co.nz/products/10899-rack-strip-single-angle-16u-black) so I made my own…
Mit diesem Adapter kannst du die Bambu Lab Standard Spulen mit einer Bohrmaschine von Hand aufspulen
Unlock Versatile Power: ALDI ActivEnergy / Ferrex Battery to Wiring Harness Adapter Harness the potential of your ALDI ActivEnergy or Ferrex 20V power tool batteries with this robust adapter. Designed as a 3D-printed solution, this…
My wife loves her YETI Rambler 10oz but it didn't fit the Lexus 350 cup holder so I made this little adapter that provides a 3 1/2 inch shelf that supports the little thermos. The base is open so you can put normal cups their when the…
An adapter to make your Xshot Ragefire and Dart Storm compatible with a standard camera tripod. Hardware required: 1 1/4-20 heat set insert - I used an 8mm one Some way to set it in place This is designed to print without added supports.
Adapter for the Andonstar AD407/AD409 Microscope to attach the stand to a Microphone / Boom Arm. 1/4″ 20 Gang UNC (6,35mm Außendurchmesser 5,35mm Kernlochdurchmesser) 3/8″ 16 Gang UNC (9,52mm Außendurchmesser 8,25mm Kernlochdurchmesser)…
A simple and quick adapter for cooling the qidi q2 printer's motherboard. Allows for mounting an 80mm fan. Draws air in from the outside.
3D Printed Circuit Splitter for Patient Lung Ventilation Tested in humans Print instructions 0.2 layer 20% infill No supportts
This is a Adapter to mount the Hoymoiles 800W on a wall. This is for the wifi version.
I didn't want to make these cages stick out any further than necessary from the fork so I made this adapter and used stainless steel hose clamps to secure the cage to the fork. I put Xpel chip guard film on the fork. I put VHB tape on the…
I wanted to motorize my Z axis on the Fiber Laser Category: 3D Printing
Use original clip (also attached). slice with the clip section downwards (see pictures).
Adapter piece is mounted between the mounting peace at the handle bar and the part that holds the bottle, to level the bootle if the handle bar is angled. A thread insert (M4) per part is needed for the the additional needed screw. The…
Schlauchadapter passend für Hyla Staubsauger. Um das Rohr nach der Desinfektion trocknen zu lassen.
Extrusion length same as the rest of your Z extrusions. x2 - Mgn9c, Length 50mm shorter than Z extrusions. x4 - M2 or M2.5 heat inserts x4 - M2 or M2.5 8mm SH x6 - M3 heat inserts x8 - M3x6mm BH x4 - M3x12mm - 16mm BH x2 - M3x8mm BH Only…
This is a adapter for 3.5" Floppy Drive sized devices to be used with Thermaltake cases. Instructions Print it out and use it Category: Computer
For Hydra Bed for DREMC Build Plates Suitable for: 2x Wago (for Line/Neutral) 2x LDO Thermeristor Breakout Board (Pre-Installed Thermeristor or M4 Screw In Cast bed thermeristor) Ground wire preferable run directly from bed to the shared…
This is my very fist model made without the aid of a tutorial. Please be gentle with any feedback! I used two non-3D printed parts for this. 1 was a thermal insert for the ¼-20. These can be obtained just about anywhere online. The other…
I made this so that I could collect as much dust as possible from my table saw. I printed it with PLA on my creality years ago and it cracked. Printing with TPU on a more modern Prusa MK4 is a better material to work with. Print with thin…
Adapter um das leichte demontieren des Advanced Filtration Kit zu ermöglichen. Benötigt werden: 2x M2x8mm Schrauben 4x 5x3mm Magnet Rund 1x Molex Click-Mate Tin Plating https://www.molex.com/en-us/products/part-detail/5033950410 1x Molex…
test fit the adapter on the air fryer, it should be a snug fit, then remove, cut off the remaining connector on the knob and glue large cross shaped part onto it, then you can put the knob back on the air fryer
Looking for a clean, reliable way to disconnect your JST connections? My custom-designed model seamlessly integrates with Wago 221 mounts, offering a professional and secure solution. Originally developed for the heated bed sensor…
Design Concept The vacuum joiner adapter is designed to fit seamlessly between two different diameter vacuum pipes, 32mm and 35mm, allowing for greater flexibility and compatibility in connecting various vacuum components. Function This…
Print both parts, fit the clamps under the top cover as normal and put the riser plate beneath before screwing down to give clearance over the servos. Cover modified in Prusasclicer using negative volumes. May not print using other slicers.
This is a gridfinity bin for storing the Harbor Freight Hercules 6 in. wobble socket adapters. It's based on half-grid dimensions (21-mm) and is 8 X 3 (4 X 1.5) by 4 units high. It has a stacking lip and includes a text label (you can…
I had a particular battery I wanted to use in mt Frog, but none of the available adapters were big enough for it. I also didn't fancy buying new, smaller batteries to use, so I came up with this. The battery I used is this one :…
Design Concept The vacuum joiner adapter is designed to fit seamlessly between two different diameter vacuum pipes, 32mm and 35mm, allowing for greater flexibility and compatibility in connecting various vacuum components. Function This…
An adapter to make your Xshot Ragefire and Dart Storm compatible with a standard camera tripod. Hardware required: 1 1/4-20 heat set insert - I used an 8mm one Some way to set it in place This is designed to print without added supports.
I made this so that I could collect as much dust as possible from my table saw. I printed it with PLA on my creality years ago and it cracked. Printing with TPU on a more modern Prusa MK4 is a better material to work with. Print with thin…
This is a gridfinity bin for storing the Harbor Freight Hercules 6 in. wobble socket adapters. It's based on half-grid dimensions (21-mm) and is 8 X 3 (4 X 1.5) by 4 units high. It has a stacking lip and includes a text label (you can…
About this: This is a Power adapter for ThinkPads that have the Hexagonal Power Plug on the back. According to https://www.thinkwiki.org/wiki/Power_Connector the following models are known to use this connector: ThinkPad 355, 355CS, 355C…
Small garden hose adapter with internal threads Multiple types BSP 3/4" ro 1/2" BSP GHT 3/4" to 1/2" NPT NPT 3/4" to 1/2" NPT I think you would get optimal strength if printed at angel degrees. Haven't gotten to fully test them yet please…
Description an adapter for 75 mm rc wheels to a l e g o compatible wheel. i used theses wheels https://www.aliexpress.com/item/1005005135166121.html?spm=a2g0o.order_list.order_list_main.15.9b9d1802Z9kr6i . the model has the shinkages for…
TopsCNC Heavy Y axis NEMA 23 adapters. Mounts to the original NEMA 17 mounting locations. The V10 adapter is to add clearance for the Self Aligning Pillow Block Flange Bearing bolts/nuts. Category: 3D Printing
Introducing the new 45 record adapter, shaped like a pyramid! Its unique design is not only visually stunning, but also functional, providing a sturdy grip for your 45 records while playing. This compact adapter is perfect for DJs,…
Basic adapter plate to adapt Ender 3 v2 Neo - Cooling Fan Duct 2x 4020 Fans (Noctua) by Wayan Traversat part cooling fans to 5015 blower fans Use M2 or M3 bolts and nuts to attatch to the original model and fans to the plate.
I lost my original arm for the plamp. Uses the original screw and washer, and a ¼-20 heat set insert. Insert the screw before setting the insert. You will need a t-20 driver that fits inside the ¼" insert hole.
print and slide it on your gyre then you can mount your xf350 on the euro brace
These adapters allow you to connect a standard size shop-vac hose or a 4" diameter hose to an Oneida super dust deputy. The shop-vac hose was tested with a RIDGID brand hose; should be a fairly standard size but haven't tried any other…
