78 modeli
If you have any questions, complains, requests, or other comments, please let me know!
Appa whistle, generates a high pitch noise.
This crown was originally meant to be worn by the crown prince of the Fire Nation. In his youth, Prince Sozin gifted this to Avatar Roku as a symbol of their friendship before Roku went off to master the other three elements. Eventually…
This is a remix of a great looking model of Appa from Avatar the Last Airbender by Alpha3dPrint . The original file wasn't able to print so I had to repair it in meshmixer prior to printing and I figured while I'm at it, let's make Appa…
A small collection of five coasters (Fire, Earth, Air, Water, and the White Lotus) with a coaster holder that has a multi-color design of Raava and Vaatu embedded without the use of an MMU or Palette! Designs are based on art from Avatar:…
🔥 Inspired by ATLA, a wearable prop that is easy to print! 🎎🏮 I am a fan of Avatar: The Last Airbender, and many years ago I published the simple crown from the animated series. Since the recent Netflix live action show, I decided to…
GLUE REQUIRED! NO SUPPORTS OR SANDING NEEDED! Currently, I think this is the best model of Sokka’s Boomerang available here. (At least for print beds the size of the MK3 or MK4). If you want a dual color print but don’t have a dual color…
🐾 3D Printing Tips for Your Aang Figurine ✅ Recommended Settings: Layer Height: 0.1 - 0.2mm (Fine enough to capture Aang’s iconic arrow and robe details). Infill: 15–20% (We want Aang to be light and lively, not overstuffed like a…
Hairpiece worn by Princess Azula and Prince Zuko. In S2 Princess Azula is seen wearing a red hairpiece with a gold strap. In other parts of the series, both the royal siblings are seen with gold hair pieces held in place with a red band…
This is a Contour Map of the Avatar: The Last Airbender world that I converted into a 3D print. Each of the continents are super-glued into the correct place on the base-ocean File sizes are made for my Ender 3 but you should be able to…
Avatar the last Airbender - Earth Kingdom Coin One sided - 1.25" in diameter - Ironing enabled. No supports needed. Coin stand created by: zen13 - https://www.thingiverse.com/thing:193233
Just a simple Avatar the Last Airbender wall art design. I printed it out the maximum size my printer allowed. Scale in your slicer and make sure The Z scale makes it the thickness you want. I used bluetak/sticky take to mount them. I…
This is the head piece of Azula from Avatar: The Last Airbender It is made to be used directly on the hair/wig. Model is already oriented to be printed as is. Feel free to visit our website/instagram for more cosplay props 3D models and…
This is a pendant based on the Necklace worn by Monk Gyatso in Avatar the Last Airbender. The pendent prints on it's back. Two "holder" pieces are printed separately and are glued on. The holder pieces allow sting to be tied to the…
Prepare to watch the upcoming release of Netflix's Avatar: The Last Airbender with these bookmarks. Water Tribe, Earth Kingdom, Fire Nation, Air Nomads: pick your favorite, or print all four.
A collection of the 4 elements from Avatar the Last Airbender as keychains! If you want any others or any changes let me know and I can make them! These can be a bit of a pain to print all together even with an AMS/similar device because…
The crown of the Fire Lord. Seen worn by Sozin, Azulon, Ozai, Zuko, and Izumi. The topknot band changes color depending on who is wearing the crown. The coronation version does not have a band that goes around the top knot. The hairpins…
Revamped for better printability and assembly. separated blade and handle (they now connect with a tang like a real sword) added varaiations of the print for different sized printers The files are organized by various printer sizes. Print…
Fly high with the lovable sky bison! This Appa figure sits on a 'Yip Yip!' cloud base, capturing his gentle giant personality. A must-have for every Avatar fan. 💙 Enjoying the Freebies? I love bringing these concepts to life and sharing…
This entire project is 5 parts, a tile of each of the 4 nations and a frame to place the tiles in a grid. The tiles will fit into the grid and stay without help, but using something like super glue is recommended to make it more secure.…
Suki's headpiece as it appears in the Netflix Avatar the Last Airbender series. The model can be printed intact or separately in 3 pieces. Be sure to scale the headband to fit better. Alternatively, you can shrink the headband and cut out…
💧 🪨 🔥 💨 Water. Earth. Fire. Air . Long ago, the four nations lived together in harmony. Then, everything changed when the Fire Nation attacked I am a fan of Avatar: The Last Airbender , and so here are some super easy to print coasters or…
A beloved character from Avatar the Last Airbender
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
An Avatar: The Last Airbender themed wall art, featuring the logos for the four elements: Water, Earth, Fire, and Air, as well as the White Lotus in the center Glue required to hold the logos in place on the holder.
Avatar the last airbender nation tribe symbols as coasters, or wall decor. Originally was going to use as coasters, by filling in with resin, but can also be stuck to a wall, using velcro or command hook strips. you do not need to use…
Zukos dagger with sheath. Everything is in a single .step file, bring it to the slicer and split. I used PLA, but use whatever filament you want, any settings you want. IDGAF. You're a big kid.
Not all of us can Waterbend spilt coffee off the table, so you are going to need coasters - this set of four coasters based on the Bending Elements of the Avatar the Last Airbender / Legend of Korra universe. In order to keep things tidy,…
Multi-color Avatar The Last Air Bender Elements. Designed for the MMU or the Palette, it is not able to be printed in multiple parts then be glued together. Please post makes and remixes as it really inspires me to do more cool things.…
So you can pretty much hold whatever you want in these containers. They don’t lock shut, but they do print without supports and have a cool white lotus lid. Plus there’s a pen cup. You can literally make them as tall and wide as you want,…
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
💧 🪨 🔥 💨 Water. Earth. Fire. Air . Long ago, the four nations lived together in harmony. Then, everything changed when the Fire Nation attacked I am a fan of Avatar: The Last Airbender , and so here are some super easy to print coasters or…
Water. Earth. Fire. Air. Long ago, the four nations lived together in harmony. Then, everything changed when the Fire Nation attacked. Print your very own pendant from the water tribe, earth kingdom, fire nation, or air nomads! I got some…
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
This is a my version of the Fire Lord Headpiece from Avatar - The Last Airbender an American animated fantasy action television series. I made three mount sizes. So you can choose the size of the top knot . The diameters are 33mm, 44mm…
A semi-translucent bookmark showing the Avatar logo and Aang's head. The writing and Aang's features print as a single layer on the bottom (at 0.2mm), allowing light to pass through when the bookmark is held up to a light source. This…
I use a different heatblock with my Sidewinder, the one compatible with the PT100 Thermistor. For this reason, most fan ducts were either too bulky for my setup or cooling the nozzle and heatblock more than the part. A few weeks and 12…
The Blue Spirit was one of the coolest characters in the whole show, after looking into printing the mask I realized I would just have to design his sword. So here it is! All pieces are in the orientation I printed them in, as far as…
This is the tiara worn by Avatar Kyoshi. It has been modeled using the Live Action reference changing some of the engraving. Engraved files had been sculpted, so your slicer might spend some time to correctly slice the models. The "fan"…
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
AirBender – True Bladeless Fan (Mark 4) Bladeless fans are fantastic – but often pricey. I wanted to see if I could model and print the principle myself. How hard could it be? After diving into the theory and going through several…
A bear mixed with a platypus? (GASP) PERRY THE BEAR MIXED WITH A PLATYPUS?!
💧水 🪨土 🔥火 💨气 Water. Earth. Fire. Air . Long ago, the four nations lived together in harmony. Then, everything changed when the Fire Nation attacked I am a fan of Avatar: The Last Airbender , and so here are some super easy to print…
These are tiles for the board game Paisho from the show Avatar: The Last Airbender. Paisho is featured frequently in Avatar and has had many real sets of rules created for it over the years, most of which can be found here. The tiles…
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Aang Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
A new 3D figurine generated by AI, a Chibi Momo (Avatar). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Zuko Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
2 colour coasters of the element signs from Avatar the Last Airbender. i printed them in PLA but you can use PETG if you wish as that is a bit more heat resistant. There is a Bambu .3mf and a Snapmaker U1 .3mf
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh and Zuko Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Aang Cosmic Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Toph Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
This is a bust of the character Toph Beifong from Avatar: The Last Airbender, it has already been cut for easy print and assembly. DISCLAIMER: This is a fan-made 3D model of Toph Beifong from Avatar: The Last Airbender . This project is…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Sokka Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh Leaves from the Vine Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
Sokka's Club seen on the new artwork of the GAANG as adults. Print 4 alignment pins if you don't want to buy 6mmx50mm wooden dowel alignment pins. Wrap the handle in leather or pleather. This print does not need supports if you cut it in…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Katara Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in…
very fast sky bison
It's the monkey companion of avatar aang!
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
Intro and Features Print and Usage Video here! This is a storage and display stand for Mooncat's Avatar: The Last Airbender nail polish collection. Double hinged box design with the ATLA world map on the front cover Displays the entire 8…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Book 1 Netflix Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in…
El logo de la nacion de tierra de la serie avatar "airbender"
Detailed 3D printable Chibi Aang From Avatar The Last Airbender In Avatar State figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Llavero del elemento de tierra de "Airbender" con colores clásicos de la serie de Avatar
The Blue Spirit was one of the coolest characters in the whole show, after looking into printing the mask I realized I would just have to design his sword. So here it is! All pieces are in the orientation I printed them in, as far as…
Aang in a kite-car : The Last Airbender :
This is a digital STL file - print-ready and high quality. The iconic Blue Spirit mask — my fan tribute to a series I discovered and genuinely loved. Designed both for cosplay and premium display for true Avatar fans. This is a bundle…
NON-COMMERCIAL - V2 FRAME ONLY Video - https://www.instagram.com/reel/C9SlWjeOBwJ/?utm_source=ig_web_copy_link This complex color/low waste model uses 8 different colors (13 instances). AMS/MMU not needed. Manual filament swaps can easily…
![Airbender necklace [Avatar the Last Airbender]](https://media.printables.com/media/prints/111157/images/1095404_84f9e2e7-8874-4ab8-bc27-9124d746213a/large_display_imgonline-com-ua-compresstosize-z4l.jpg)
