Liczymy pasujące modele…
One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Wydruk około 4,58 €–5,60 € nettoWstępna wycena jednego wariantu
Just glue the front and the body.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena jednego wariantu
This is a stick of dynamite (32mmx200mm) and a band for making a three-stick bundle. Printing: The dynamite consists of two pieces, the Stick and the Plug. The Plug holds the fuse. Both were printed without supports. The Wrap is a…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple shift gate for Futaba RC transmitter T6L. This separates the three speeds of the Tamiya 1/14 tractor trucks (and also the high-lift models) allowing easier forward and reverse control in all three gears. Once you have set up your…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…
Wydruk około 9,09 €–11,11 € nettoWstępna wycena jednego wariantu
I designed an adapter for the Supernote Ceramic Nib Refill to work with a Tactile Turn Ultem Pen. This will allow you to use the refill in the Tactile Turn Bolt Action Short pen. The adapter prevents the copper coil from coming into…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have a Tiger family for you for a diorama, or just for play. A very cool figure. It is suitable for coloring. My children absolutely love it :-). Important: If by chance…
Wydruk około 4,97 €–6,08 € nettoWstępna wycena jednego wariantu
A pentagonal bipyramid.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This is the recreation of a very old toy I used to make as a little boy. I “stole” a large clothing button from my mothers sewing basket, and added a piece of string. Spinning around the button until the line broke…. The modification I…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Modeled with a real Xbox controller scan. Provide a much more comfortable grip on tablets while gaming. I made it specifically for playing Real Racing. The internal depth is 7.5 mm, and the ridges are 0.3mm tall. This fits my tablet with…
Wydruk około 14,00 €–17,12 € nettoWstępna wycena jednego wariantu
Sada čísel v rozsahu 1-10 určených pro fixování a zdokonalování grafomotoriky, jemné motoriky a práci s drobným materiálem. Do děr lze umístit různé variace drobného materiálu, nebo lze např. provlékat barevnými tkaničkami, drátky apod.…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
made this bowl stackable and originally for my mom, please enjoy if you need one too.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Elongated pentagonal bipyramid.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Section of a pyramid parallel to the plane with magnets. Insert the magnets after the print is finish (6x3mm)
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Studenti navrhnou hrací kostku pro výuku německého jazyka (a dalších jazyků) s vyměnitelnými panely, kterou pak používají jako aktivizační pomůcku pro opakování na začátku hodiny.
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Pulley Puller for Dynamic Range X1 Parts: 3D printed beam (1) M3 x 3mm Thread Insert (CNC Kitchen) (1) 15 x 3mm socket head screw
Wydruk około 2,31 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some of these are remixs of creative commons attribution files found years ago: - Ape https://www.thingiverse.com/thing:182151 - Black Bear https://www.thingiverse.com/thing:182072 - Bat https://www.thingiverse.com/thing:850829 - Blink…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
To be placed on the fridge, using: 4x 8x3 mm magnets or 4x 8x2 mm magnets. 4x 10x3 mm magnets. 4x 10x4 mm magnets. 3x 20x5 mm magnets. 1x 40x7 mm magnet. and without the magnet holes download another model here:…
Addams Family Thing keychain printed 0.16mm
I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is the whole trick, and it…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
Transform your workspace with this unique pen pot inspired by Thing from the Addams Family! Designed for high-detail, unsupported 3D printing, this model combines functionality with a touch of spooky charm. Perfect for fans of the iconic…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Was asked if I could create a small table to replace a Sylvanian Families table with a broken leg. The one I made is not the same style, but it's the appropriate size and I was quite pleased with the result. But what good is a tiny dining…
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
This is my new version of the Hatak Class Pyramid Ship from Stargate. The model is waay bigger and waaay more detailed, then my original one. It also comes with a pyramid so it can land on it. It is a kit and you do not need any glue for…
Help some one just stabbed me in the head 🎃 Here is a fun print ready for Halloween. the main body, eyes and stork and are all separate elements, allowing them to be printed in different colours if you have the capability, though looks…
Size: Aprox 82x85x60mm (L/W/H) Step into a world where battles unfold amidst the remnants of ancient civilizations with our intricately designed 3D printable terrain – the Ruined Corner Wall with a Hole. Crafted specifically for wargaming…
This is my detailed model of the Cheops Class Pyramid ship as seen in the movie Stargate and few episodes of the series. Though the ship is in its landed variant and cannot change, it has one big feature. The top can be open and show a…
A beautiful interplay of simple lines combined with regular geometry in a retro Miami style. Bring the 80s back into your room with this model and have fun printing ;) Make sure to download, leave a like and take a look into my other…
Summary This is a 3D-printable Yoshimura bloom pattern, specifically a Y-6.2 pattern (meaning it has six-fold symmetry and two rings extend out from the center). The membranes between the panels are designed to accommodate the folding…
Tree Root Gaming Stand Level up your setup with this tree root–inspired gaming stand , a unique blend of nature and gaming aesthetics 🎮🌿 Designed to look like intertwined roots growing upward, this stand securely holds your controller at…
Here it is! If you seen my previous video you have probably been waiting for this. I will have to warn you guys though, this is not an easy project. I cannot provide technical support if you try to make this and have issues. This is a…
Replica de KURONAMI VALORANT Esta replica cuenta con 3 versiones: Kuronami de piezas múltiples. Kuronami bipartido. Kuronami monopieza. Tolerancia de modelo: Uniones con 0.05 de distancia entre piezas.
My girlfriend ask me for an incense holder one day and I decided to surprise her and made this simple, practical and funny design. I've divided the object to make it easier to clean the ashes. I've made 2 versions of the tray for each…
Sometimes, you don't just want to measure a straight line. That's why I created these print in place flex rulers - simply print them two coloured and you have your perfect ruler to measure charge distances or movements. The tolerances are…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out the companion model, Hōzōmon ! ⚠ - - Please read the Print Instructions further below - - ⚠ 雷門 Kaminarimon ("Thunder…
This is a model timber building designed for 28mm wargaming, however it can be scaled so would be great on any type of scenery layout. I am creating many free models and also sell some more elaborate models on my website in my digital…
A beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colours. You can add text with BambuStudio!
Summary Aside from creating things that are fun to look at and play with, principles of origami can also be used to prototype new designs, create helpful tools, and solve real world problems. This Oriceps design is an example of a…
Bring cutting-edge robotics into your collection with this detailed 3D printable STL model of the Boston Dynamics Spot Robot! This advanced quadruped, known for its agility and sophisticated design, is perfect for tech enthusiasts,…
My pet bearded dragon died about 5 weeks ago and wanted to make a mini to memorialize her. I don't really have any personal connection to Dia De Los Muertos but it's a holiday celebrating lost loved ones so I don't think there was any…
These creatures get born on Halloween and they are very, very hungry! This model should be printed without any support! If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel…
To make painting of parts easier I made some painter's pyramids to elevate the workpiece (thought there must be a better way than putting nails in strips of wood every time.) There are already a lot of designs out there, but I wanted to…
On my Cricut Explorer Air my 12x12 mat was always flopping down while it was going back and forth while cutting. I designed this to help keep it stay in a straight plane while printing etc. Hopefully when i have some more time on my hands…
Battletech Alpha Strike gaming ruler Works for any table top game Ranges: 1" 2" 4" 8" Catapult Mech logo Trigger finger guard to cowboy spin when landing those crits Optimised filament use and printing time. No supports need, all prints…
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
This one is the simpler shape in the series, and that is part of why I like it. It is a simple print, and once it is off the plate it makes a fidget I can keep turning over for hours. The pyramid form is easy to follow with my hands, and…
I recommend printing with 0.16mm layer height, and I enabled variable layer height for my print.
IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.
Design Concept This family statue represents unity and the deep bond of familial love, depicted through the embrace of the figures. Purpose Ideal as a decorative piece for homes, conveying warmth and togetherness. It makes a thoughtful…
A beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colours.
Foaming - Expansion test These cubes are for the determination of the flow rate of POLYLIGHT 1.0 - LW-PLA at different temperatures. Based on POLYLIGHT 1.0 Technical Data Sheet , these six cubes are printed from 200 ° C to 250 ° C (higher…
senku ishigami from anime dr stone
This model is compatible with the lego system.
This is my attempt to create a Mario question mark block type Amiibo stand. It prints easy without any supports. Use 0.2mm layer height and 7% infill with a triangular infill and 3 walls to make it beefy. The question mark object needs to…
A set of ruin-themed bases for wargaming, sized to 28.5 and 32mm
Tamiya Mercedes C11 Mirrors. 2 Piece with no supports needed. Print vertically and I used a 0.2mm nozzle with 0.1mm layer height for best finish with zero infill. See picture for how to assemble them with superglue and I also used…
Add comfort and ease of use to the CMF Phone 2 Pro with these easy to attach grips. Modeled to match the profile of a standard ps4 Dualsense controller, these grips will make gaming on your phone much more comfortable. Supports should be…
Celebrate the beauty of togetherness with this modern, minimalist sculpture of a family of four. Designed with clean, geometric lines and a timeless Scandinavian aesthetic, this 3D printable model represents two parents and two children…
A Pentagonal pyramid aka 5 Sided Pyramid
A fun 3D-printed door hanger that reads “Gaming Mode On, Social Skills Off — Please come back later” with a game controller icon. Perfect for keeping interruptions away while you’re fully immersed in your game. Recommended print settings:…
I recreated the shock mount that I currently have. It should be good enough to print with supports. I will probably create a 3D printing friendly one that does not need supports. You will also need a elastic band to connect the two…
A small 3.6cm (approx 1.5inch) ball to attach to the doorpull straps of a Citroën Ami or Opel Rocks-E (or the upcoming Fiat Topolino?). Sick of having to need a firm grip on the door strap? Door flies open at the slightest gust of wind?…
This is a small upgrade for my Cheops Class . It includes 2 files - Horus and Jackal, and the idea is to have the open ship more decorated. The Horus can easily slide on the base nad hold nicely on its own. The jackal however needs to be…
IO Shield for MSI Z270 gaming plus motherboard. This model was reconstructed digitally from an image and as such may not be perfect. Imperfections are mostly unnoticeable at scale.
A 4-inch ruler for wargaming and skirmish gaming. Has a 1, 2, 3, and 4 inch side. Made with the game Moonstone in mind, which has a 4-inch default movement range, but should work great for a number of different games. Two versions are…
This combination of garden hose connector from @matej and bottle cap from @3DAcademy can serve many purposes for example: pressure reductor - with a large hole in the bottle you can water your plants without any pressure from the hose and…
Summary Pyraminx puzzle stand Also, created a "double stack" version of the design for a little more artistic look. Check out my other puzzle stands: Speed Cube | https://www.printables.com/model/422968-speed-cube-rubixcube-stand…
Introducing the whole Gingerbread Family! They make a great christmas tree decoration as ornaments, but also everywhere else. 2 Options: two coloured for printing with Layerchange four-coloured for AMS usage. please share your makes!
28.5mm, 32mm, and 40mm bases for miniature gaming. Themed around alien ruins.
Supports are required because not all parts of the model will touch the bed (because of the ergonomic design) and the overhangs are drastic. I also recommend printing them with a brim to prevent the parts from peeling up.
A pony, lying on the ground. She has no hair nor tail, but you can for example glue on yarn. Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Pony-Entertainment-System-PES-788524638 Print instructions Rafts: Yes Supports:…
Five equilateral triangular pyramids interlocking with each other.
WORK IN PROGRESS !!! I AM ACTUALLY JUST PRINTING THIS SO CHANGES MAY COME AS I FACE PROBLEMS !!! Bleach Ichigo chain “printinplace” from entering soul society So i was rewatching Bleach and one evening i decided to do some modeling and…
Extension for Hamilton Beach Dehydrator Model 32100A or the Westside GameKeeper model mentioned in the Makes. 258x330mm tray fits most 1kg filament spool as well as larger food items, mushrooms, and flowers. No supports needed! Print…
This game rack will fit jewel cases and boxed Famicom Disk System games. 2 different size slots in each section.
Phase One/Mamiya M Mount [STEP]
Lay tilted on bed for better layer strength:
Wargaming Measuring Widget - For KillTeam Warhammer40k and similar. Edges are: 1" 2" 3" 6" With 1" notches (except for the 2" side for a cleaner print). Hexagon is 1.5" across (flat side to flat side). Slot is 0.5" wide, 3" long. Print…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
Pattern roller I made when I needed some ground effects. Note that theses were used for small pieces, the roller is about 5cm wide. Feel free to enlarge as needed. See other ceramic tools I've made here .
I loved the original design from RANIBIZUMAB but I got annoyed by the model not being completely placed on the axis, so here isa remix with fusion360 files. I also did a redux that is curved for some more soil space. Category: Outdoor &…
"Kimegami" Origami Crane Base Crease Embosser A set of plates for pre-creasing the crane base onto 70mm square origami paper. Useful for completing one thousand origami cranes . These may be scaled by 107.143% for use with more common…
Wall decoration design found throughout Andalusia, Spain.
Armed with a heavy sledgehammer and a massive stone shield, this miniature embodies the essence of endurance and raw power. Perfect for tabletop games , display collections , or as part of the Destruction faction in your fantasy world.
This is updated version of my MF-01X conversion. Designed from scratch, it addresses feedback from users as well as my own findings and ideas. This version is much more modular, I will post number of modifications as remixes and encourage…
![Phase One/Mamiya M Mount [STEP]](https://media.printables.com/media/prints/1040328/images/7888796_341854e8-ec60-4739-91b7-a9ca2bab70ff_b7381dfb-650f-40e3-8567-ff5083caf15e/qqpin-yin-jie-tu-20241015134234.png)
