P
PrintablesBreakfastDeluxe
Asus AP201 Cable Grommet
Used to cover unused cable accessways in the case for a cleaner look
- Pobrania
- 183
- Polubienia
- 34
- Ocena
- 0
Wyniki wyszukiwania: ap201
Liczymy pasujące modele…
P
PrintablesUltraprecision Technologies
Asus Prime AP201 Stock Case Foot
I received my Asus Prime AP201 MATX case today, only to find one of the case feet was broken in shipping. Rather than waiting for it to be shipped back, and a replacement case be shipped back out, I decided to make an exact replica of the…
- Pobrania
- 142
- Polubienia
- 25
- Ocena
- 0
P
Printablesmattts
ASUS Prime AP201 Short Replacement Foot
The lovely Asus Prime AP201 computer case was slightly too tall for the shelf it lives on, so I printed these slightly shorter feet. They reduce the foot height by 14.5mm, can re-use the same screws and non-slip pads, and allow a bit more…
- Pobrania
- 141
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRavingSombra
ASUS AP201 slim SFX PSU bracket
Even if you're using a SFX power supply, the original bracket might be too big and be in the way of the graphics card. This model only uses the necessary space to mount the PSU in your case. 4 M4 nuts and screws are required
- Pobrania
- 99
- Polubienia
- 12
- Ocena
- 0
P
PrintablesZurrie
SSD/HDD Storage (AP201)
Print in PETG (or a flexible materiale) Made this to fit the Asus Prime AP201 case with the ATX psu fully on top. The devices have 18mm spacing to make room for SATA power cable clearance.
- Pobrania
- 94
- Polubienia
- 20
- Ocena
- 0
P
PrintablesHarrisCK
Asus AP201 Extended Feet
About 15mm longer than the original feet to allow better airflow to any bottom mounted fans when the PC case is placed on carpet. I found even with on a medium pile carpet the bottom dust filter is essentially sealed off. These give…
- Pobrania
- 93
- Polubienia
- 8
- Ocena
- 0
P
Printablesspiggytech
spiggytech Arctic LFII AIO hose manager for ASUS AP201
This is a quick project I made in collaboration with a friend. It is a small AIO hose manager for the ASUS Prime AP201 chassis using a Arctic LF2 280mm AIO. His chassis had a collision with the motherboard, so the AIO was placed in an…
- Pobrania
- 69
- Polubienia
- 9
- Ocena
- 0
P
PrintablesScaleTheTrail
SF750 riser stand for AP201 pc case
A basic stand for the Corsair SF750 PSU I added two small strips of 3M double sided tape to keep the PSU in place, but it would stay seated without them as well. If you plan to move/ship the pc I would recommend that you use some cable…
- Pobrania
- 67
- Polubienia
- 13
- Ocena
- 0
P
Printableskuboris
Asus AP201 Corsair PSU Cable Adapter
Corsair PSUs do not fit seamlessly into the Asus AP201 case due to differing power cable orientations. To resolve this issue, replace the included power cable extension with a custom cable that fits. Once the custom cable is in use, this…
- Pobrania
- 62
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBuiltram
Fan duct mod for Asus AP201 case GPU deshroud mod
Moves the ASUS AP201 140mm intake fans closer to the gpu for deshrouded cooling. The GPU pictured is a deshrouded PNY XLR8 3070 This uses 8 regular case fan self taping screws. 4 screws to mount the fan to the duct and 4 to mount the duct…
- Pobrania
- 56
- Polubienia
- 11
- Ocena
- 0
P
PrintablesToufique Ahmed
ASUS AP201 Mounting Snaps
It's an amateur render of the small clip holding the side of the ASUS AP201.
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSander V.dijk
Asus ap201 Mini case handle
In combinaton with a tension strap to carrie your case
- Pobrania
- 50
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDuchy
Asus AP201 Front Panel
The wood strips are 275x10 mm with a max thickness of 13.5mm. They are made to be slid in from the back and glued. Printed at 0.08MM layer height to mitigate drooping on the overhang (made to match the stock panel) (I laser cut the strips…
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 5
P
PrintablesPaetrick Bette
ASUS AP201 SFX Holder
Ein Remix von RavingSombra, bei dem anstelle der 6-Kant Löchern für Muttern, M3 Schmelz Einsätze genutzt werden. A remix by RavingSombra, where M3 hot-melt inserts are used instead of the hexagonal holes for nuts.
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHrumque
Wyższe nóżki do obudowy komputerowej Asus Prime AP201
Oryginalna obudowa Asus Prime AP201 (obojętnie która wersja - ze szkłem, siatką, czarna, biała) ma nóżki od dołu 25mm wysokie. Stawiając taką obudowę np na dywanie - nie ma jak ciągnąć powietrza od dołu, a na pewno działa jak odkurzacz i…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSaltyPkay
Asus Prime AP201 Stock Case Foot Filled
filled Stock foot for Asus AP201 Case
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMadRajib
Top Shelf for Asus Prime AP201
A Top Shelf for Asus Prime AP201 to better utilize the upper space of the cabinet. 10mm magnets can be added to the feets of the stand for better grip with the case.
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
PrintablesImanorangutan
Asus AP201 Cable holder (OLD)
Make sure to print it at 0.08 layer height.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSalim Sakic
Ap201 foot v3
all rights go to @mattts just slightly editted the high lifted it up from 12,5 mm to 18 mm
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesImanorangutan
Asus AP201 CPU Intake Air Duct
I made this because I was worried that the top exhaust was stealing fresh air from my CPU cooler so I made this. The CPU cooler I used is the Thermalright Assassin x 120 SE with another fan on the other side. I am not sure it works with…
- Pobrania
- 14
- Polubienia
- 6
- Ocena
- 0
P
PrintablesImanorangutan
ASUS AP201 Cable Holder
Cable holder for the ASUS Ap201
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMotor Ahead
GPU Anti Sag (ASUS Prime AP201 Micro-ATX Case)
A sleek, factory looking approach to address GPU sag on the Asus AP201 Miro-ATX Case Designed for a XFX 7800XT, but should work with other large cards. Slight modification to the case is needed. My approach: Used a Dremel to make an…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesStorhemulen
Smartrap20140315-Jhead-200x200-buildplate
Edit: This thing is OLD! go for the latest version on github instead: https://github.com/smartfriendz/smartrap The awesome smartrap by http://smartfrienz.com . 2014-03-15 I took all the parts from http://www.thingiverse.com/thing:177256…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPlatypusOfAction
AP201 SSD Cage
Bottom holes are for M3x3mm heatset inserts. Print vertically for no supports. Should work with any case that uses standard ssd pattern for bottom mounting a drive.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStorhemulen
smartrap20140315-huxley-200x200-buildplate
The awesome smartrap by http://smartfrienz.com . If you have a huxley hotend. 2014-03-15 I took all the parts from http://www.thingiverse.com/thing:177256 except for: http://www.thingiverse.com/thing:271512 which is not needed, but I…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printables
Asus AP201 Front Panel
The wood strips are 275x10 mm with a max thickness of 13.5mm. They are made to be slid in from the back and glued. Printed at 0.08MM layer height to mitigate drooping on the overhang (made to match the stock panel) (I laser cut the strips…