848 modeli
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Maple leaf with voronoi design. Can be used as a keychain, coaster under your cup, earrings or just as a home decoration. The leaf has a unique voronoi design similar to the drawing on living leaves. Suitable as an autumn or winter…
This is a removable Stake used for Gardens, fencing and other uses. It has a low profile knob so you can find it to remove it and hang it when not in use. It prints flat with no supports. I have provided several sizes, but you can modify…
Easy to make a Maple leaf keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Silueta de Charles Chaplin. Se puede imprimir en tres capas de diferente color. Decorativo.
GCode File Description: Flow Calibration for Prusa XL with Prusa PLA This GCode file is specifically designed for calibrating the material flow (flow rate) on a Prusa XL 3D printer using Prusa PLA filament. The purpose of this file is to…
If printing from stl, Set top layers to 0, infill to concentric 60%, color change top 2 layers.
Store your stuff This holster gives you a dedicated spot to hang stuff off your Ikea rolling cart. The design snaps on over the curved lip of the organizer cart and has chamfers, so the stapler (or whatever) slides in and out easily. The…
Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…
Willliam Nylander #88 Coaster
Feeling a little nostalgic over your former military career? For those of you that served at AFSOUTH/Allied Joint Command in Naples, Italy this might interest you.
While the overall quality of this laptop stand is not too shabby, the flaps represented a weak point in this product. The original flaps (injection-molded ABS) both came loose after a few months of using the stand daily, and glueing them…
This is the Tatra logo and installation jig. To stick it correctly, straight, with the right spacing can be a challenge. In order to make the application of gluing the letters successful, I have designed this simple tool. Preparation:…
I needed a container for my new Rösle BBQ Probe/Thermometer so i designed it to fit in the Parametric SnapLock Box by Hugo. https://www.printables.com/de/model/805599-snaplock-storage-boxes-parametric Box Parameters Used: Length: 100 mm…
I modified the box to fit a small version of the gridfinity system (32mm grid base) to store all the parts of the new version and to be able to take the boxes out while playing. The inner measurements are 133x161x36; the outer…
Er was een dopje van de balein van de paraplu waardoor het doek niet meer goed opgespannen kon worden. Nieuwe gemaakt en hij doet het weer. Weggooien is tenslotte zonde.
Allgemeines Ich fand das original Modell sehr niedlich, allerdings lies es sich mit dem gewölbten Boden auf der Unterseite nicht sehr gut drucken. Daher habe ich Modell angepasst und den Boden begradigt, sodass es sich gut drucken lässt.…
Used Hugos Snaplock box because I love the fact it requires no hardware or filament tolerances. This will hold 3 set of the 50 piece collections from Wago.
just a simple maple leaf model that you can use in your projects scale it, print it 👍 So have fun printing and please leave a like!
oak and maple leaf cookie cutter
This is designed to work just like the standard Ford funnel. The geometry is very similar except I made the mouth of the funnel wider to help avoid spills. I also didn't see much value in the clip that is on the original. Print…
It holds the stapler very snugly to keep it from rattling around. Even so, you might want to glue a thin layer of foam to the bottom of the stapler pocket. Configured for a stapler with the belt clip on the left side; if yours is on the…
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
Model of Kaplan turbine. Bolts: 10x M3x8 10x M3x6 15x M2x6 Print instructions Unassociated tags: kalan turbine, kaplan trubine, kaplan turbine, power plant, water power Category: Engineering
Not sure if this one is a plant, sponge or fungus - but it looks funny and prints fine without support. :-) Growing in difficult terrain like rocky deserts or alien jungles, it can be used for decorative purposes or as a unusual landmark.…
As I broke my Firemaple's stand, was looking for similar printable model, with no luck. It is designed close to original part. It should fold to fit inside the pot. Here some specs from their website: With the Canister Stand, it's easy to…
This is a remix of the No Screws Parametric Box. I made it custom sized and extruded the die for the lid (top). All you have to do is do a filament change. Interior Dimensions : 120mm x 60mm x 35mm Instructions: You will need to print 2…
im new to 3d printing and im trying some things on fusion360. BTW there is no hole on the one i printed but you can print it however you want
Store pills or other small items in this compact 3-piece model with locking latch. Small enough to toss into a travel bag and keep wherever needed. Can easily be color customized as they are 3 separate parts that easily snap together.…
The original site does not mention the license of the file, so I set the license as public domain.
Introducing the "Autumn Bliss" —a 3D-printed maple leaf pendant capturing the essence of fall. Its unique two-tone look, achieved by changing colors mid-print, mirrors the warmth of autumn hues. For optimal detail, print at 0.1mm layer…
This cookie cutter was made in tinkercad and than i printed it on my ender 3 from PLA plastic. If you want, you can check my profile for more cookie cutters :).
Inspired from a real maple seed that blew on my patio one evening. Exactly the same size as the original seed. I tried different versions of the wing thickness and the more layers it got, the less it would spin requiring more height to…
Ersatz-Zinke für den Bruder Linde Gabelstapler 1:16. Nachgezeichnet nach 2D Scan. An der Spitze der Zinke einseitig verjüngt. Für die andere Seite bitte gespiegelt ausdrucken. Verstärkt. Passt besser als das Original. Auf den Fotos sieht…
This is a remix of the original SnapLock Storage Box (Parametric) . THE BEST BOX DESIGN THUS FAR IMHO!!! New parameters were added to the bottom of the favorite list w/in Fusion 360 Parameters interface as shown below. Note: There are…
A charming, collectible-style bust of silent film legend Charlie Chaplin. Designed with smooth surfaces and a minimalist clay-like finish, this stylized piece captures his unmistakable features—bowler hat, mustache, and expressive eyes. A…
This model is designed to print well with PETG. in my tests I found PETG to work better for this than PLA since cookies stick to it the least and it's a bit more flexible. I printed it with 0.6mm nozzle and 0.2-0.3mm layer height. There…
This Voronoi Maple Leaf can be used as a key-chain or earring or just as a home decoration.
A cheap and simple way to remove receptable terminals from a molex microfit 3.0 pin. Usually, you need a special tool from Molex , but a stapler does the job just fine. One side takes two staplers (DIN 24/6), one takes a single one. The…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
Introducing the MikroTik Hex and Haplite Rack Mount Holder, the perfect solution for seamlessly organizing and safeguarding your valuable network devices. Designed to securely hold your MikroTik Hex and Haplite routers, this rack mount…
This is the National Flag of Canada in official dimensions, converted to 3D by Makerwiz. The Maple Leaf was first raised in Ottawa on February 15, 1965, replacing the Canadian Red Ensign, our previous national flag. Since then, February…
Stapler für 1er + 2er Gravitrax Schienen, passend auf die Grundplatte
These bouncy transport machines quickly turn into hopping menaces. The pods they carry can disrupt your focus or cause other noxious effects. It doesn't help that they pursue with unreasonable long and electrified jumps. It's best to take…
Original photos of fallen maple leaves make for a fun HueForge Experience! Play with colour and sizes to make a lovely array - I also used my heat gun to create some movement with the leaves. Maple Leaf 1 - Print at 100% infill with a…
Espátula de aplicação de vinil largura de extrusão 0.6 3 paredes preenchimento 0% brim e suporte imprimir ela em pé
Air 65 SnapLock Storage Box – Remix This model combines the SnapLock mechanism by Hugo with the Air 65 storage box designed by Martillito Martinez . It provides a secure and convenient way to store your Air 65 drone , keeping it protected…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Toronto Maple Leafs logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more. Print at 100%…
Remix of https://www.prusaprinters.org/prints/71490-removable-fence-stake-garden-stake-landscape-stapl 30x90 without the head and text, 12 pieces.
I ran some PEX tubing from my shop to my office to supply air pressure. Mine is regulated to 30psi but their are a number of people on Youtube using air at full pressure, you can decide, if you do these are handy to hold the PEX in place.…
Basierend auf dem Vorbild der Aufbewahrungsbox von @Hugo habe ich Inlays entworfen. Für die 3er Version Box 180x60x25 Für die 6er Version Box 180x120x25 Die 3er Version wurde bereits überarbeitet.auf den Fotos ist die V1 zu sehen. Update…
This case is remixed from the SnapLock V2 parametric design available on MakerWorld. The internal layout has been modified to include six ribbed slots sized for 3 mL insulin or peptide vials, which reduce full surface contact with the…
This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…
Decorative maple leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Oak leaf -…
Maple leaf generated from picture. You can customize your size from the bigger model "maple leaf.stl".
Pohyblivý model turbíny. https://youtube.com/shorts/JvOVVHwwNLo?feature=share material:
When u change from a small number of trays to a bigger one, there can be a problem with the extrusion. Swap in the timeline to the last 2 steps and select the wrong sections.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I created this wall mount so I could use the Waveshare 10.1DP-CAPLCD touchscreen for a home assistant dashboard. It is designed to mount to a 3-gang electrical box. Update for V2 I ended up relocating my raspberry pi out of the wall, i…
Thelmo wanted a Chaplin, he was our project manager, we helped a little with the arms and the cane, the rest was all his work. #OttoRemixChallenge OTTO is for Thelmo, and for a lot of kids I've introduced OTTO to, much more than a robot.…
This is an insert for Maple Valley, a Creature Comforts game based on getting ready for the big Spring Festival. The game has a bunch of resource tokens and cards, and this insert is aimed at getting everything out of the box quickly and…
Public domain model of a Martin M130 seaplane by noenmaster . Originally uploaded to Blend Swap .
I recommend printing upside down (chamfered edges down) to keep the nice surface visible, and the likely rougher top print surface in contact with the strap. Not really a remix (a new model), but I did ape Mikolas' design. His model…
Maple Leaf Cookie Cutter An easy to print and fun to use maple leaf cookie cutter. It features a tapered thin edge for making clean cuts with the dough. The cutter also has a wide face making it comfortable to use. Printing Nozzle - 0.4…
Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20…
An easy printable model of Castel Nuovo (Maschio Angioino) in Naples, Italy. I designed this after finding scans that are too detailed, won't print right or don't quite fit the style I was going for. Prints well on the Prusa MK4 - no…
A case form factor with dimensions similar to Mikrotik Hex for Haplite TC. Printed with Creality Ender 2 Pro using Kingroon Red PLA.
Toronto Maple Leafs Keychain, Will 2023 be the year they make it out of the first round??? Printed on an Ender 3 S1 Pro with Sonic pad running the normal profile for Ultimaker Cura
These unobtrusive LED bars shine light at the print from both sides, for great visibility even on the first layer. This version uses a switch. Design features: This design adds a switch to my previous design:…
This is an easy(ish) to print model of the Dodo airlines from Animal Crossing New Horizons. Print the following files in white: 1 x BottomFuselage 1 x Pontoons 1 x LeftStrut 1 x RightStrut 2 x Diagonal Print the following in a different…
Why this model? Configurable to you're hearts content with only your browser (no login/installation) No screws/hardware Very easy to print Toolless assembly Generates and centers as many hinges as possible 3D gasket geometry on the…
The fall season inspired this maple leaf shaped candy dish / decorative bowl. It measures about: 170mm x 150mm x 40mm or 6.7" x 5.9" x 1.6" Default slicer settings + a brim works well. I found the brim to be necessary because of the thin…
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
This is a storage bin for your spare staples, 2x1, stackable. holds up to 40 strips of staples.
Here you go! Create your own tunnel for your toy railway train, e.g. BRIO, with KAPLA planks. Use the tunnel extension for longer tunnels. The parts are provided with a slight friction fit so that your tunnel does not fall apart when you…
To fix two cardboard pieces together. I cut a V shape on my laser cutter, find the measurements for the cutout in the pictures. Video in action: https://youtube.com/shorts/q-hNIi5E2L4?feature=share
Gridfinity bin with a slot for a stapler I got at tesco and storage for staples and/or other office supplies. 2x4 Gridfinity cubes wide 1.5 cubes tall Printed with PLA, supports on for magnet holes, 10% infill (I'd up it to 20% as I had…
With driving on a lot of muddy, dusty, and snowy roads I wanted a way to keep junk off the capless fuel filler. I drew this up in Fusion360 and printed it in TPU. The cap slips over and the holder uses a small piece of double sided tape…
TL;DR The Hinge connector for the Kapla Planks education system. update 2024-0117 added new hinge version, stronger and easier to print Collection Kapla planks, tavolette, plankjes, Holzplättchen, planchettes Many different connectors to…
This is a remix of 3Ddys Forklift keychain . It was extended by a litte horizontal bar (see pics) to avoid that the forklift spins arround when carriing. If you like it please do not forget to give 3Ddy a like, too. Thanks! Material: PETG…
Enjoy these realistic and useful leaf trays to keep you organized and bring a little nature into your life! Scalable. Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is quick to print and easy-to-play toy! How to play: try to throw it away holding the biggest blob on the print (that's where the maple seed should be) and throw it away from yourself and in a couple of minutes you would be rocking…
Mit diesem Teil zwischen 2 Grundplatten(siehe Bild) halten diese perfekt aufeinander.
Kaplanovy turbíny se využívají ve vodních elektrárnách s menšími až středními spády a relativně větším průtokem. Díky natáčivým lopatkám rozváděcího i oběžného kola ale dokáže pracovat se stejnou účinností i při sníženém nebo proměnlivém…
MapleSnowBall The " MapleSnowBall " is a decorative element to hang, designed to be printed by separate pieces with recycled Pla and then painted or to be printed with a color change, in three colors. It is prepared to be printed…
There are other versions of this, but this one matches the dimensions of the rest of my rack mounts
These unobtrusive LED bars shine light at the print from both sides, for great visibility even on the first layer. Easy wiring and installation with commonly available parts. Design features: The light shines from opposing sides, to…
Basic cover for A5 sized disc-binding systems. You can use your favourite modeling tool to emboss something into (or through) the cover for specific designs. This is just a basic core template.
I got this boxes years ago and have been using plenty, eventually adding and removing some features I was mad of or missing. So the drawers got an integrated knob and label-frame and a mechanical interlock to stop them from slipping out…
I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…
Easy to print KAPLA connector. No supports needed. Happy printing!
"The Maple Leaf Forever" is a Canadian patriotic song written by Alexander Muir in 1867, the year of Canada's Confederation. The modern lyrics were written by Vladimir Radian, winner of a CBC Radio contest, in 1997. Michael Buble sang a…
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
Hobbymäßig verarbeite ich recht viel Folie, egal ob Scheibentönung, Folie oder Vollfolierung. Ich verwende meistens 3M-Rakel, aber aus Neugierde habe ich mal ein eigenes Rakel designt und gedruckt. Ich musste feststellen, dass es…
Pièce pour agrafeuse Rocafix ES130/ Part for stapler Rocafix ES130 Category: Replacement Parts
![SnapLock 2.0 - Parametric [Beta] - Dual Latch](https://media.printables.com/media/prints/1042797/images/7905964_2c747e3e-7c14-4b12-b50f-c7caa5d96e49_a3b5c2d5-4e6f-47aa-b831-9d5acb51175a/screenshot-2024-10-11-225305.png)
![Maple Leaf Shaped Tray [Set of 3]](https://media.printables.com/media/prints/7b97a9e0-98f8-4c05-a986-a727bdb4a7be/images/10776579_80f2b2cb-d5f7-4252-8856-8e2c5f21ad2e_6e9e73e0-6869-484e-ad6f-08237219a4fa/maple00.jpg)
