Liczymy pasujące modele…
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
This is a katana for Dummy 13. It is about 90mm long and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out this remix done by DrunkenGlitchy for a more well defined guard!…
katana s desingem Naruto
Author: Unknown Print instructions Print takes roughly 30 minutes (15 minutes on the MK3) at 200 µm layer height.
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
strata vase modern minimalist vase design full dimensions in mm ~ x: 120 · y: 120 · z: 200 photos show printed in the awesome Vibers PLA colours, that were kindly provided by ColorFabb includes profiles for x1c and a1 mini (@85% scale)…
Launch into Fun with the Uhltimate 3D-Printed Catapult! Unleash the power of precision and engineering with my state-of-the-art 3D-printed catapult! Perfect for hobbyists, science enthusiasts, and anyone who loves a good challenge, this…
This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This pop-up catapult prints in place, the only extra part needed is a rubber band. Though even if you don't have a rubber band, you can still launch manually! Note: Before printing you may want to test your printer's tolerance for print…
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
██████╗ █████╗ ████████╗███╗ ███╗ █████╗ ███╗ ██╗ ██╔══██╗██╔══██╗╚══██╔══╝████╗ ████║██╔══██╗████╗ ██║ ██████╔╝███████║ ██║ ██╔████╔██║███████║██╔██╗ ██║ ██╔══██╗██╔══██║ ██║ ██║╚██╔╝██║██╔══██║██║╚██╗██║ ██████╔╝██║ ██║ ██║ ██║ ╚═╝…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Fixed print-in-place clearance, added features for education
This print is an easy 3-part assembly. You don't need any supports or glue. Just print and click it together. Perfect to test your printer or just as a fidget on your desk. It makes use of a spring gear that will bring back the knob that…
---------------------------------------------------------------------------------------------------------------- Update Optional Storage Box I uploaded all files needed to store all parts for 4 players within the original game box.…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
Infill, 20% a new version https://www.printables.com/model/752394-dummy-13-katana-holster-v2 holster v1 and v2 require minimal support V3 requires no supports
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
Brr. Brr. Patapim, my hat is full of Slim. In the dense and mysterious forest, Lived a being most curious. With tangled roots and crossed legs, Thin hands and waving arms, His nose as long as a ham, A bit like a baboon, a bit like a bush.…
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
IMPORTANT! You still need the original game of Catan. Print, Clean Up, Paint and Enjoy. The small discs on the edges are to improve bed adhesion, after printing they just snipp off. Full guide is on instructables (check source) I did not…
Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…
Loved the original design by @Przemo007 but wanted the development cards to lie face down. This prevents other players from seeing the bottom of the card as it's pulled. I've uploaded versions for the two card sizes I'm aware of: 80mm x…
Update 23. Dec. 2023: Problems in the Cura Slicer have been fixed Update 11.Nov.2023: Added additional parts and variant + Katana Based on DUMMY 13 Beta - Oct. 2023 Get your Dummy 13 here: /model/593185 I designed this part to create…
A remix of Adam-M's Catapult Card. I just moved the spring support arm down to the print bed so you no longer need supports.
Enjoy the original Batarang!
Catan is one of my favorite board games of all time, and even thou there are already plenty of version of 3D printed Catans out there, I really wanted to make my own. I found a lot of inspiration and I have remixed a lot of designs that I…
Welcome to The Low Poly Auto Show! This is a low-poly Mazda Miata. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…
Pulled and converted the 3D model of the DJI avata 2. Very suitable to make mods or take dimensions!! Non printable at this moment due to complexity
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…
No support required any infill Please print in black.
Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…
This the COOLEST way to hang keys in my opinion: Parts to Print: Backplate - 1 Main_body - 1 hook - 1 lifter - 1 Pin Small - 1 Pin - 1 light_Right - 1 light_Left - 1 Print Settings: Backplate: 15% Gyroid Infill, No supports Main_Body: 15%…
katana bez loga
The largest part of the ship is used to test whether your printer can print the entire model. Printing takes more than 30 hours and it is necessary to place suitable supports in it. This is the biggest (test part) of FOSS which is…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
I have found the 3D model as I have mentioned below and then I have printed it with Grey PLA. From the beginning, I noticed it was bad first layer calibration but I let it continue to see the result. :) With better first layer…
A simple bookmark that shows the famous katana on the outer face and which uses a fin to separate a book's pages. An easy, fast print. The bookmark works best on paperbacks but it can also accommodate hardcovers by simply pulling the…
There is two versions of this katana. The first (v1) use one 5mm metal rod to solidify the blade, the second (v2) use two 3mm metal rods. There is two versions of the scabbard. The difference is the position of the kurikata (the little…
This is based on the original thing by ChaosCoreTech and the subsequent remix by Cyphn . I was not quite satisfied with the stability of the core/logo mechanisms in either the original or remix and decided to rework the model so that it…
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.
Wanted to make some probably decently proportionate katanas.
Title says it all. I've optimized the size for the bed of the Prusa Mk3. As it was too big at first, I made it modular for printing at the maximum size. I've also included a smaller one that can be printed in one go. The legs and body are…
2 Katanas and a holster
Sword stand for Japanese Katana. Holds a single sword. Printed with Proto-Pasta “Empire Strikes Metallic Black” HTPLA. Everything just snaps together, no glue or screws required. Tolerances are tight, so some very light sanding might be…
This is a fully 3D printed catapult capable of launching projectiles over 80 feet. The spring is attached to the arm using a hexagon, so you can add more tension by rotating the spring a little more before attaching it to the arm and to…
Deadpool Collapsing Katana (Print in Place)
Print the cardholders and the hinge parts, now put as many holders together as you want. Also check out Catan Piece Holder: https://www.printables.com/model/362195-catan-piece-holder
Shoot anything as long as it's small. No matter how long or short. Doesn't look like anything, great for sniping your coworkers and have plausible deniability. Print it at any settings. Tested both at 50% infill 0.2mm and “draft” preset…
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
If you have any questions, complains, requests, or other comments, please let me know!
Is now tighter
Update 06.09.2024: You will find a complete redesign of this model here . Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Mazda Miata / MX-5 (NB) in a…
Model of the Mandalorian Kom'rk class (Mark 3) spaceship from the Mandalorian. https://starwars.fandom.com/wiki/Kom%27rk-class_fighter/transport The Wings can be rotated and folded. For the folding mechanism its important to print two…
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
Summary It is a model of a Mazda Miata / MX-5 (NB) in a kit card style. This is a complete redesign, based on the idea of my old model . This one has been redesigned from scratch with more experience and knowledge. Some characteristic…
Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…
A catapult to throw any type of paper, small bullets... To shoot your friend or your co-workers! Print instructions Print all the parts as the import unless you feel you can print then in a better orientation. Some parts may need support.
Okuyasu used Za Hando to remove most of Josuke's body! A meme of Josuke from part 4 of Jojo's Bizarre Adventures.
No supports needed, but pretty tight tolerances. Scaling up can help with clearance issues. If your slicer lets you, select the throwing arm and up the infill and wall count.
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
Catapult inspired by Leonardo da Vinci, more powerful than a simple desk toy, roughly 110mm tall (frame) Easily printed within 24 hours, have fun! Be sure to upload photos of yours when its complete! Id love to be able to include them in…
Edit: thanks to FB user Kevin, it’s confirmed that it works with NAs as well. Although you can see from the photo that the vent outmost ring is slightly smaller than NA’s factory opening. Shouldn’t affect functionality, but aesthetically…
I made this mostly for the Vanguard 13, but it uses the same mounting system as the stock ATAB cannons. You can use it with the multi-arm backpack I posted a little bit ago. For added flair, you can print the bottom of the gun in a…
Mein allererstes Projekt einst, jetzt überarbeitet für Multicolor. Und ein paar Probleme aus den Bemerkungen. Mit der alten Version voll Kompatibel. Die Siedler von Catan - Das Basisspiel für bis zu 6 Spieler. Das Original wird weiterhin…
For optimal results, print the model using a 0.4 mm nozzle. Almost all parts can be printed "in-place" (as a single piece) without support structures—only the lid needs to be attached afterwards. All blades are fully interchangeable. I…
Become the greatest swordsman, Dracule Mihawk with this quick and easy print! Requires: 1x Blade 1x Sheath 1x Handle Recommend print all parts vertically 2-4 walls 20-30%infill When assembling, apply light heat to the sheath, ensuring…
this is a wall mount for katana and wakizashi (the little sword on the top). I decided to make this support because the swords are bulky on my desk. the screws that you need are 4 M3
Once we hit 70 followers, a new 3D model will be released!
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
A fully 3D printed catapult for chunkin mini pumpkins. Go for distance or accuracy! https://youtu.be/6TlCzzJzYZQ Printing All parts can be printed without supports Add brims if curling is an issue - especially on the base If parts are too…
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
Designed with meticulous attention to detail, the model features a textured tsuka (handle) with intricate patterns that emulate traditional ito (braid). The tsuba (guard) boasts a classic aesthetic with a contemporary twist, while the…
Layer Height: 0.2 Infill: %15 No Supports
There are 6 varients, Goggles strap mount / Goggles strap mount easy print & versions with a cable tidy Belt mounts in standard and easy print (slightly wider clip.
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
I really liked the concept of the original that can be found here: https://www.printables.com/model/362095-catan-card-holder-v1 However, it was too small for the version of Catan cards I have. So this is a scaled up version to fit cards…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
