Liczymy pasujące modele…
Accessories for Betrayal of the Second Era boardgame from Chip Theory Games. Mini Chip Organizer This is a drop in organizer to sort the mini chips into their three categories: Overland, Stats, and Skills. There is space for 16 additional…
2nd Edition! For all those pesky fiddley bits in Betrayal... Organize them using this token organizer that fits perfectly in the box! Stores all tokens for Betrayal at House on the Hill board game and Widows Walk expansion. Everything…
This is an unofficial insert for Chip Theory Games' Elder Scrolls: Betrayal of the Second Era. I wanted to create something that would make setup and teardown as painless as possible while also allowing for modular setups based on your…
Designed and printed some makers for Betrayal At House On The Hill because the originals were a bit loose. Printed in ABS, might need some light filing on the arrows for a safer fit. Print instructions Print the arrows with high…
This is a complete set of organization for House on the Hill Third Edition. I remixed Plottiplotplot's awesome token holders ( https://www.thingiverse.com/thing:5570455 ) and ShayDwight's awesome Card Holder (…
Lids for Betrayal at House on the Hill 3RD EDITION Organizer to prevent tokens from dropping from their holders during box transportation. https://www.printables.com/model/680183-betrayal-at-house-on-the-hill-3rd-edition-organize
Baldur's Gate Remix of SpaceFanatic's Betrayal at House on the Hill Organizer. This fits all Betrayal at Baldur's Gate cardboard tokens, including the large character tiles. Enjoy! Card Tray: This fits all cards (events, items, and omens,…
Very basically, this is a "dog" figurine to be used in place of the token that comes with Betrayal at House on the Hill. Nothing special, really. It IS designed for resin printers - you can try your hand with FDM, but it's pretty small…
These box inserts for Betrayal at the House on the Hill 3rd Edition are meant to protect the delecate game material and simutaneously enhance the gaming experience by organizing the material for easier access. All inserts can be use…
I made a set of game token organizers for betrayal at the house on the hill. It is designed to use 10x1.8 mm magnets to press into the parts to hold them together in the organizer. The fusion 360 files are uploaded, and I parameterized…
Character dashboard for Betrayal Legacy. Recommend using the "lite" version, which uses about 1/3 less filament
I got tired of the Room Tile stack falling over, so I designed a simple holder with an easy "bury" mechanism. If you skip a tile when drawing, simply push it into the slot at the bottom. There's a small ramp inside the slot, letting the…
Yet another Betrayal at House on the Hill (3rd Edition) box organizer. This is compatible with all available 3rd Ed expansions: Werewolf's Journey, The Yuletide Tale, and Pennywise. Once you print this, you can pitch the other boxes. Now…
A few 3D printable storage organizers for Betrayal at the House on the Hill board game. (Added a loose lid to help prevent pieces from falling out when tipped, but there's also a remix with a better fitting lid.) Category: 3D Printing
This is a skyshard token for the board game Elder Scrolls: Betrayal of the Second Era. Skyshards are collected during Delves, and accumulated in the game as a stack of cards. These skyshard tokens can be collected instead, and can also be…
About Organize all the Encounter, Delve, Specials, and Guild cards plus their respective chips into boxes specific to each region. These were designed in the style that you see with board game insert master js500 and Hextra . I have…
I designed this as an altar to hold the Helm, such that its magnificence can be properly beheld by all in attendance. Took almost 20 hours to print at 0.08 layer height and 5% infill, but any less would be an affront to the Helm. Has the…
Tile Holder for Betrayal at House on The Hill in the style of and inspired by Waycrest Manor from World of Warcraft. It features a slit at the bottom which makes it easy to slide in tiles to the bottom of the stack when you need to cycle…
This is a remix of MysticTome's excellent Betrayal at House on the Hill 3rd Edition box organizer – specifically the parts that don't fit on the bed of a Prusa i3 mk3 (S/S+). The files include: Betrayal_3rd_Player_Board_Prusa_i3 : the…
A simple holder for the event, item, and omen card decks for Betrayal at House on the Hill. After spending countless hours playing this game, my friends and I found that it is hard to keep the event, item, and omen cards in neat stacks,…
Player tracker that is gentler on the cardboard player sheet than the ones provided by the game. For a full game you will need: 6x Mats 24x Indicators
I fused together the pieces for the second floor of Taython's Betrayal Dice Tower to make assembling it easier. I fused the Betrayal_Tower_Balcony, Betrayal_Tower_2nd_Floor, and Betrayal_Tower_Attic_V2 pieces into one stl.
Adjusted the base of the arrow to Colecago's markers
This is a simple organizer for the room tiles in Betrayal at House on the Hill. The holder will not fit the extra tiles from the Widows Walk Expansion. Helps keep the tiles from sliding all over during play. Print Settings Printer Brand:…
A replacemnt insert for the original organizer in the box. It's designed to accommodate the Caracter Markers designed by Colecago . It's low profile because we keep all the cardboard counters in resealable snack bags. There's enough room…
@Friedmutant created some excellent token holders for Elder Scrolls: Betrayal of the Second Era here: I loved the idea of having the tokens stick to a magnetized map, but found a bare metal sheet as a base both unattractive as well as…
The original Betrayal at the House on the Hill stat markers were too loose for the supplied character cards. These ones have a tighter fit and longer indicator to better show what number it is on. A FreeCAD file is supplied in case anyone…
These are dividers for the chip storage trays that come with the board game Elder Scrolls: Betrayal of the Second Era. The enemy draw bags must be set up using a mix of general chips and four province-specific chips. All of the chips have…
Torre dei dadi - Betrayal At The House On The Hill (Tradimento alla casa sulla collina) con recinzione estraibile per occupare meno spazio e balconata dove poter collocare gli otto dadi. NB: Gli inserti dove nascondare la recinzione…
You will also need: 8 3x2mm circular magnets (Unaffiliated link: https://www.amazon.com/dp/B0B5GGSK3F ) 8 46x1mm metal rods some craft glue pliers (optional, but useful for snapping the magnets into place) I liked the designs I found for…
Stat marker clip for Betrayal at House on the Hill. This clip attempts to stick close to the original piece, only adjusting the tolerance to fix loose clips that fall off easily, and lengthening the pointer to make it more clear which…
This is an alternate back option for Auyl's original design for the Betrayal game. Not yet printed, but should work fine. All that was changed was the interior brick design.
Elder Scrolls Betrayal of the Second Era dice trays with skill line logos. This is a remix of the dice holders from the excellent insert by davidsaurus (see:…
An organizer for Betrayal at House on the Hill that fits the base game, with Widow's Walk expansion, and a thematic dice tower all in the base game box. This was designed for my copy of the game, which I believe is a second edition…
Prendendo spunto da una un'altro modello ho ridisegnato totalmente questa torre dei dadi. Composto da diverse parti per una piu semplice stampa ed organizzazione in modo da stampare direttamente con colori diversi alcune parti. Ogni pezzo…
3D Print Insert/Organizer for a game Betrayal at House on the Hill. ATTENTION! This includes only my added files to the design. Original design is from Mystic Tome. No lift, can be stored sideways, fits sleeved cards. Check more of my…
Replacement clip for tracking stats for the board game Betrayal at House on the Hill! Note: This is for the SECOND edition. The third edition uses a different tracker. We lost a LOT of these over the years, and often found that they slid…
100x160mm sign, with Klingon advice about trust. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs .
Remixed from Ender3D's "Betray at House on the Hill - Organizer (& Baldur's Gate)" https://www.thingiverse.com/thing:3577659 or "on Cults3D" https://cults3d.com/en/3d-model/game/betrayal-at-house-on-the-hill-organizer-baldur-s-gate I…
Description A minimalistic, symbolic sculpure exploring betrayal, reflection, and emotional growth. A twisted, bare tree faces a shattered mirror hanging from its branches, while a single bloom persists out of reflection's reach- simple,…
I really liked the player tracker,, but noticed that when I put in my character tiles from 3rd edition, there were some text that was hidden. So I modified this, to add a little extra opening at the botton, so the texts can be vidible.…
I really liked the organizer this remix is based on, but I tend to store my board games upright, so the pieces would have all fallen out. Hence, a lid! Took all the pieces into CAD, arranged them just right, and modeled this part to hold…
2nd Edition! For all those pesky fiddley bits in Betrayal... Organize them using this token organizer that fits perfectly in the box! Stores all tokens for Betrayal at House on the Hill board game and Widows Walk expansion. Everything…
Baldur's Gate Remix of SpaceFanatic's Betrayal at House on the Hill Organizer. This fits all Betrayal at Baldur's Gate cardboard tokens, including the large character tiles. Enjoy! Card Tray: This fits all cards (events, items, and omens,…
I really liked the organizer this remix is based on, but I tend to store my board games upright, so the pieces would have all fallen out. Hence, a lid! Took all the pieces into CAD, arranged them just right, and modeled this part to hold…
Uses 10 3mm x 3mm cylindrical magnets for the lid. If your bed is big enough you can just print the “Base” and “Lid” For smaller printers print “Cut” 1-4 and Lid Holes may need to be reamed with a 3mm drill bit. Magnets will likely need…
This is a token I created to mark rooms after a haunt begins that have special conditions, such as rooms that you can perform a ritual in. I printed it in PLA with a white base and a black symbol (12) and a black base with a white symbol…
Remixed version of Tim Jalas' Box Card, better for sleeved cards
An organizer for all the bits and pieces of the 3rd edition of Avalon Hill's Betrayal at House on the Hill board game. The filler piece is large and comes in two parts with a puzzle connector. It only serves two purposes: Slots for the…
Simple remix for V3 of the game. Original was too long and hide the value on the board.
This holder is designed for the 3rd edition of the game with a box base measuring 260mm x 260mm x 75mm. For a full box organizer you need to print the following One of each. If you have a larger bed printer, you may be able to reduce this…
This is a remixed character stat arrow for Betrayal Legacy , designed to slide more smoothly along the dashboard tracks. Small raised ridges on the underside reduce surface friction, making it easier to adjust stats during gameplay while…
Replacement die for Betrayal at House on the Hill, but slightly fancier! Older model from my "vault" on MyMinifactory, but figured it would be nice to have them on Printables as I'm more active here.
This is an addition to the wonderful organizer from MinimalistGaming. There was just one missing piece: Where to put the figures and the little markers? This simple tray is the answer. It fits into the now free card-space on top of the…
READ STL AGREEMENT BEFORE PURCHASE! Now including a split base for smaller printers! This is an extensive box insert for the board game Betrayal at House on the Hill 3rd edition. This insert is an excellent way to not only keep organized…
READ STL AGREEMENT BEFORE PURCHASE! Now including a split base for smaller printers! This is an extensive box insert for the board game Betrayal at House on the Hill 2nd edition. This insert is an excellent way to not only keep organized…
This is a storage and play box for the house tiles for Betrayal at House on Haunted Hill. It is just for the base edition, and would not fit all of the expansion tiles too. I don't have the expansion and don't know how tall I'd need to…
Hello! This thing is a set of inlay boxes for the tabletop game "Betrayal at House on the Hill". I can highly recommend the game for anyone who dreams of being possessed by evil spirits hellbent on murdering the other players characters.…
These trait markers for Betrayal Legacy dont dmage the board as much as the original ones. I provided 2 print files for PETG on the Ender 3V2 with direct drive kit (Prusament Recycled PETG). It needs some Sanding at the end if you print…
This is a set of caddies for sorting and storing pieces for the game known as Betrayal at House on the Hill, as well as some pieces to stop cards from shifting around in the box, since the Widow's Walk expansion adds enough cards to cause…
New character stat marker that doesn't slip off. Printed in PLA, oriented on the top edge, no supports.
These are organizers for the tokens and dice for Avalon Hill's Betrayal at House on the Hill. (2nd Edition) I don't know if this will work for the first edition. For the 2nd edition however, It fits nicely in the box and they stack. I…
Print as many 1x1 tiles as there are house tiles, one 1x3 tile for the hallway and one holder to keep them all organized. I used PETG, but really it can be anything. The holder makes the box lid stay upright a little, since there really…
Betrayal At The House On The Hill - Stanze esterne da posizionare intorno alla casa, trattasi di espansione persaonalizzata
Traits' Markers compatible with the 3rd edition of the game.
Check out the boardgamegeek entry for this game, there's lots of extra content.
I learned alot with Fusion360 when creating this insert. Numerous fails and reprints.
![Elder Scrolls: Betrayal of the Second Era + Valenwood Insert [BOTSE]](https://media.printables.com/media/prints/ed39d689-aa74-45c4-a73b-b7868a6e8d2b/images/9344262_8cdb6e5c-a286-496d-9d72-5825fda4b6a5_6aeab8d4-e50f-4fe0-a339-ffeb344c9761/cover.jpg)
