Liczymy pasujące modele…
I edited this perfect tool with fusion360 - after some testing/using the original model, I discovered that I need longer bores:) My design is not so perfect (no conical holes, clean surface), but it suits my needs. m3f files are done in…
(Please Note: This is still under development.) Borescope Mount and Cable Clip for MK3s. Update added 8mm and 10mm Please Note these are in Alpha so any issues please report to me. Borescope cable clip -7mm- Borescope cable clip -5.5mm-…
This is a remix from the following print, and you will need the other parts from it: https://www.prusaprinters.org/prints/34474-prusa-mk3-nozzlecam The original is for a 5mm endoscope/borescope usb camera, but I had a 7mm. Turn out it is…
This is pretty sketchy, partial mount for the Teslong USB Borescope. This scope outputs mjpg-compressed video, making it suitable for octoprint on low-powered systems. A better position for a borescope is off to the left side, but some…
I recently had a need to look under the floorboards to check on some pipework and the only easy access was a knothole less than 20mm in diameter. A cheap borescope (£7.00 on eBay) gave a good picture but was difficult to manouvre to see…
This gliding skid is a handy accessory for a borescope or endoscopic camera when inspecting pipes. It lifts the camera head from the pipe floor, keeps it level, and helps it glide smoothly over pipe joints thanks to its tapered fins. The…
I made a holder for my various bore snakes. I'm aware that calibers overlap for bore snake width, but I like to have one bore snake per caliber. I've included a “template” where you can just change the text for the caliber. The bins will…
Pegboard holder for the Teslong borescopes with the rigid metal rod. Used the backplate that Ken226 uses on many of his tool holders. Also included the files for a single rivet and 4 rivets….I think the original was lost from thingiverse,…
This is a simple borescope and induction probe mount fo the Ender 3. It required cutting a piece out of the hotend cover. See it in action here: https://www.youtube.com/watch?v=feqLumQ4LtU Print instructions Printer Brand: Creality…
These brackets are designed to allow you to securely mount an 8mm USB borescope to a Satsana fan shroud, pointing at the nozzle. I found existing solutions to be too flimsy for my taste so these are deliberately beefed up. The specific…
Une cabane dans les arbres. Impression: Activez les supports organiques pour construire les arbres et les branches atteignent les feuilles flottantes. fichier modifier .
This shroud is identical to the model i released minus the borescope. I printed these in ABS and Nylon. I would not reccomend PLA or PETG as per the original Microswiss shroud. For the borescope: The borescope i used is one of the cheap…
The cleaning nozzle is printed with PETG and do not need supports. To assemble the nozzle to the hose, I recommend to use some grease. If your hose have a different diameter or you have to adjust the diameter due to the stiffness of the…
This case has a groove for an o-ring (-168) so it can be sealed against water. All files can be printed without supports. The latches simply snap onto the latch connectors which in turn snap onto the base.
I made this mostly for my own use but I'm putting it up here in case anyone wants to remix it. The idea was to repurpose a borescope to serve as a microscope for soldering. Other than the printed parts, you'll need a borescope (I had a…
Hook for a wire basket with safeguard - an installed wire basket will not fall off if pushed from below! Wire baskets vary a lot: Another (theoretically identical) basket from the same brand did not fit that nice. Fits 90 x 20 mm bars…
Recently started seeing people post about using USB borescopes to watch the nozzle lay down the first layer (or watch the thing work its magic remotely). Figured I'd whip up something simple to hold the one I had handy. The hole is 5.8mm…
Borescope Opbergbox Deze robuuste opbergbox voor een borescoop is gebaseerd op het originele ontwerp van Frikarte3D en verder verfijnd met een volledig opnieuw ontworpen binnenkant én een uniek borescoop-logo aan de buitenkant. De box…
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
Mount for Depstech borescope camera designed to mate to packout cleat using M5 flathead screws. Mating cleat: Camera: From amazon listing: DEPSTECH Triple Lens Sewer Inspection Camera with 50ft Semi-Rigid Cable, 5" IPS Screen Endoscope…
A small, friction-fit case for a .308 Winchester boresight and 6 LR41 batteries. Label is printed separately to avoid needing supports for the lid - attach with your choice of adhesive.
VENTILATION PANEL FLANGES Choose by actual hose dimensions. 125 mm clear bore / 129 mm spigot OD / 153 mm square flange / 138 mm screw pitch; or 150 mm clear bore / 154 mm spigot OD / 178 mm square flange / 163 mm screw pitch. Four 4.6 mm…
a nice, compact holder for generic metric counterbores I recently got from Aliexp. Fit for 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm counterbores with each pocket labeled.
This Gridfinity organizer provides dedicated positions for counterbores from M3 through M12 , making it easy to find the right tool at a glance. 🧩✨ No more loose tools rolling around in a drawer or searching through a box for the right…
Mount for Depstech borescope camera designed to mate to packout cleat using M5 flathead screws. Mating cleat: Camera: From amazon listing: DEPSTECH Triple Lens Sewer Inspection Camera with 50ft Semi-Rigid Cable, 5" IPS Screen Endoscope…
A small, friction-fit case for a .308 Winchester boresight and 6 LR41 batteries. Label is printed separately to avoid needing supports for the lid - attach with your choice of adhesive.
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
You can adapt freecad model to your borescope camera if it does not fit. I use this 5.5mm diameter borescope camera: https://www.aliexpress.com/item/32891028762.html With 5.5mm diameter and top of borescope holder, bottom of camera is 7mm…
A Mounting Bracket for a 5.5mm Borescope on the Prusa Mini. This includes a modification of the original 3d Printed Fan spacer that Prusa released. This was designed to work with Obico's Celestrius AI calibration pilot program. This model…
