Liczymy pasujące modele…
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
DC17 Blaster Pistol. Model is sliced into 3 parts for easy printing! For personal use only!
DC17 blasters and holsters based on the animated series and as used by characters like Captain Rex. These are sized at 1:12 scale for customising 6 inch figures, 1:6 scale for 12 inch figures and 1:1 scale for life size props and…
4 long wing pins - fuselage to wing 1 long pin - goes through fuselage into both horizontal stabilizers 4 short pins to join fuselage section wheels printed in half and can be glued prop is split in 2 parts - glue together Paint stands…
The camera shaft fit is tight, it should be. If too tight enlarge with 3mm drill bit. Printed from ABS with 0.2mm layer. Print which material You like.
*Update I did not see that https://www.prusaprinters.org/social/1022-dsk001 Has a model named Millenium Enterprise and do not want to step on toes so I have renamed it the NCC1701-Falcon. So I had a thought and I wanted to see it happen…
Remix of https://www.thingiverse.com/thing:3353525 to fit the Ender 3 Pro Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .20 Infill: 30 Filament: Hatchbox PLA Category: 3D Printer Accessories
Like the PA-38-112 I posted before, this is a simple multi-color handout, great for gifts and incentives!
It's another camera mount for an Ender 3. This one has solid models so you can modify it.
Here are 8 3D Printable flight sim knobs I designed. You can stop at a certain layer height (google it) or paint them. These fit into standard D-Shaft Rotary encoders: https://ebay.us/YgJRTJ * I've provided the source .f3d file for…
. Print instructions Category: 3D Printer Accessories
Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…
The Polaris pool cleaners have three wheels with one driven wheel per side. This idler wheel rides between the two wheels on one side transferring power. It has raised edges that press against the tires and wear down over time. The…
Just insert the webcam into the holder, it will push it down. No screws required, 1 single part, so easy :) Don't bend the "spring" too hard though, it might break. Add it to your gopro mounts and stick it to the printer. Voila! designed…
Friction locks for engine controls DIY Flight simulator use, not suitable for real plane. Missing some mechanics and aviation related certifications. Does not actually add friction, just for looks Different heights for throttle and…
Model na ścianę ozdoba C17 Globemaster III
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
For the hardware I used 1 M3x10 screw and 2 M3x18 screws that were spare parts from my prusa i3 mk3 kit. If the holes are to small you can use 3/32 drill bit to clean them up. Link to the camera…
The little tabs on the tape spool of our Scotch C17 tape dispenser broken when someone stepped on it. I designed this to replace the broken piece so we could again enjoy the great tape dispenser!
I build a gridfinity bin for my vc175 se to hold it within my electronics Ikea 22l gridfinity box. I wanted that it is stackable because I use different colors for different bins to know what type is used in within the box. I could also…
An easy-to-print, snug fitting little mount for the ole' Archer. Assembly For the correct orientation of parts, refer to the non-plated 3D model. Slide the feet on the cages Mount cages on both sides on the router, hooks outside Hook the…
mount for Logitech C170 Webcam on CR10 i get it of ebay for 5$ Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: just print it its easy print Post-Printing you will need extra…
I wanted to monitor two adjacent printers with one Octopi server, both with cameras. After getting them both working (an RPi camera and an old Logitech C170) I threw this remix together to allow for adjustability and length. The Octopi…
I broke the original mount on my logitech c170 and needed a simple replacement. you can easily remove the original mount by running a hacksaw between the gap at the camera end at the end with the blanking plate. I have used a round magnet…
Let's build an Analog Cessna 172 ELT for flight simulation! Build video and more details here: Bill of Materials - 3D Printed Parts - Clear Piece, 9.6x11.5mm, 1.6mm thick - LED Red, 5mm - Large 3 Position Slide Switch (a12022200ux0344) -…
Passend für: https://www.amazon.de/gp/product/B01BGBJ8XQ/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Category: Other
This is a stand for a Logitech C170 webcam with a magnetic base. Two heights are provided: 70 mm and 150 mm. It uses only the base a commonly available magnetic hook. A 10 mm M4 screw is needed to attach the holder to the magnetic base. A…
This is a Logitech c170 camera mount for the MP Select Mini. Each Link goes attached to the next one with M3 bolts and nuts. Any link can be attached to the camera using the little plastic rod that came with the camera hinge (or a 35mm M3…
This is a privacy shield that you put on your Logitech C170 webcam in order to block the lens and thus to ensure your privacy. It is sturdier than the previous design (…
Supporto per WebCam Logitech C170 minimale si aggancia al piano riscaldato incastrandolo sotto la vite e si fissa con dado e bullone per poterne regolare la distanza. Versione 1.0 Category: 3D Printer Accessories
Works with the Base (Basis) that can be found at https://www.thingiverse.com/thing:3816235 that was created by Writable . Other pieces from that thing can also be mixed with this. Works also with the Arm as found in Arlo Essential Camera…
Printed in PETG with supports
This is a privacy shield that you put on your Logitech C170 webcam in order to block the lens and thus to ensure your privacy. Print Settings Rafts: Doesn't Matter Supports: No Infill: 100%
Semplice piccola staffa montare la webcam logitech C170 a destra del piano di stampa Category: 3D Printer Accessories
Printed PETG 0,2. Wheel printed horizontally with supports in matte PLA. Front panel printed vertically in two colors with supports. Assembly: Insert the insert nuts in the chassis, insert the bushing shaft into gears Mount the Pot. onto…
Držák multimetr Voltcraft VC175 a příslušenství - příslušenstvím je myšleno kabely, svorky a jehlové hroty
technical drawing by Michael H. Category: Household
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6xfbJCmlQyr Print Settings Printer: Monoprice Maker Select V2.1 Rafts: No Supports: Yes Resolution: .2 Infill: 20% Notes: Printed in ABS with a large brim…
Let's build an Analog Cessna 172 ELT for flight simulation! Build video and more details here: Bill of Materials - 3D Printed Parts - Clear Piece, 9.6x11.5mm, 1.6mm thick - LED Red, 5mm - Large 3 Position Slide Switch (a12022200ux0344) -…
This bracket is for a Logitech webcam C170 / C270 or similar Especially for mounting on a 20x20mm aluminum frame The webcam is mounted 45 degrees to the aluminum frame Slide the webcam into the holder from the side
DC17 Blaster from the Clone Wars animated series Can fit on 220*220*250 build volume It is in one piece. (One of my former paid models now for free)
Another Great Model found over at the 3D Warehouse ; ) I've split it up with the intent to print it at some stage. Otherwise the original is listed here also, if you'd like to slice it yourself Print instructions Category: 3D Printing Tests
Gottlieb star post part number C17492CR for pinball machines. Set at 0.5" hole spacing for now. Print instructions Unassociated tags: star post Category: Mechanical Toys
This is a working, 3D-print-assembled without supports, mechanical NOR gate created by our Aggregate.Org research group based in the University of Kentucky ECE Department . Our GateRodders concept is to make functionally complete…
Why this? Following my project of producing 2d images in colour I am turning my attention to printing 3d coloured objects with an MMU2S. This model is a “proof of concept” to demonstrate the possibilities using the palette available using…
Replacement Dyson DC17 attachment coupler. Printed solid in PTEG at 0.3mm layers.
