Wyniki wyszukiwania: cabel

Pax cabel holder

IKEA PAX wardrobe wall cable holder

Cabel Tube

Beschreibung des 3D-Modells This modular cable channel is designed for clean and permanent cable routing under desks, along furniture, or on walls. Key Features: Modular & Expandable: Connect multiple segments in a row to reach any…

Cabelholder for 30x30 Aluprofile

The holder can be printed without supports if it is printed on its side. Because it is made of TPU, it adapts to the slightly different dimensions of profiles from various manufacturers. (The cable tie is also 3D printed — search for…

Kabelführung parametrisch / Cabel guide paramtric

This parametric cable management system is designed to be fully customizable to suit your individual needs. You can freely adjust the number of cables, their diameters, and the overall width of the part. This makes the model suitable for…

cabelholethinghy for the desk

fits a 63 mm hole

Mujer de cabello largo

COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA

Prusa Frame Cabel Guidance Clips

To guide the Cabel, in my case for a MMU3 to the back side of the Frame of a Prusa i3 Mark 3 (possibly Mk 4)

Spotify Keychain with Artist Name (Multiple Artists), Camila Cabello, Katy Perry, Taylor Swift, Bad Bunny, The Weeknd, Lana Del Rey, Morat, BTS, Jesse & Joy, One Direction, Peso Pluma, Metallica, 21 Pilots, Olivia Rodrigo,THE 1975, etc.

Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…

Cable sorting plate 3.5mm cabel

Everyone knows it, a huge chaos on his table with cables is now a thing of the past. you can attach it with double-sided tape on or under your table to get to your cable at any time. It is designed for cables with a diameter of 4mm. if…

Cabel edge 3mm cabel

kann mit doppelseitigem klebeband angemacht werden für 3 mm kabel

cabel holder clip

3x/ 6x D max. 8 mm D min. 3,5 mm

Cabel Holder CableGuard - Sicherer Flachband-Kabelhalter für Elegoo Neptune 4

Dieser selbst 3D-gedruckte Flachband-Kabelhalter wurde speziell für das Drucker-Portal mit dem Hotend des Elegoo Neptune 4 3D-Druckers entwickelt, um eine verbesserte Kabelführung und Sicherheit zu gewährleisten. Mit einer schnellen…

Cabel comb

A cable comb tool for managing and organizing cables

Cabel Holder

It is table holder for cabels.

Cabela's Collapsible Camping Table Endcap

This model plugs the ends of a collapsible camping table. After years of use, several endcaps were missing. The endcaps are friction fit; therefore, a very tight plug was made and printed with TPU to be flexible. They should not fall out…

Cabel Clip with wall mount / Kabelklemme mit Wandhalterung

Das ist eine einfache Kabelhalterung für die Wand, welche kleine wie große Kabel aufnehmen kann, sicher festhält und jederzeit wieder freigibt. Ich hatte keine lust mehr auf komplexe Systeme, welche genau ein Kabel speziellen typs halten…

Cabel holder/clip

Description: Quick to print cable holder for 2 cables. This design should not damage your cables and allows easy removal if needed. Design allows to stack cables vertically and not horizontally. Such approach allows to stick it to door…

Skadis USB cabel holders

for skadis board system. Intended for and holding Usb cables and other cables. The Holders is printed on an Ender 5 plus and can hold from 5pcs to 17pcs, nozzle 0.4, layer height 0.2, 20% infill, with supports. The Hooks is printed on an…

Amzone Echo Dot 5 power supply cabel cover

Cable box for the Echo Dot 5 power adapter Supportfree power adapter with this dimensions: 70 x 41 x 38mm (approximate)

Amzone Echo Dot 3 power supply cabel cover

Cable box for the Echo Dot 3 power adapter Supportfree power adapter with this dimensions: 51 x 51 x 35mm (approximate

USB cabel holder+SSD holder

Jednoduchý držák kabelů a čtečky SSD karet,s možností přišroubování…

Cabel Management Collection for HSW

Simple Cable management system compatible with honeycomb storage wall - for cables with a diameter from 4.5 mm to 8 mm. You will always need a base part and a top part (you can choose between smooth and textured). The system is based on…

Angeld Cabel Clip

Designed to hide a cable behind a corner. Use an M3 screw.

Cabel Clip Raspi Cam for Enclosure Door XL

Cable clip to fixate Raspberry Pi Cam V3 cable on the Prusa XL Enclosuren oor

Cabel clip for Manfrotto Magic arm 20mm 6.7mm cable

Cabel clip for Manfrotto Magic arm 20mm 6.7mm cable Optimized to clip a Microphone cabes to a 20mm tube but works well with 19-22mm and up to 7mm cabeles.

PC Power Cabel guides

Heut hab ich mal einen Satz einfache Kabelführungen für den PC erstellt. Diese habe ich für meinen neuen PC benötigt da dort zu wenige bei lagen. Ich fand die Originalen optisch sehr gut und habe sie deswegen nachkonstruiert. Zusätzlich…

Kabelwanddhalter (Wallmount Cabel Holder/Hook)

Wandhalter für Kabel und Schläuche in verschiedenen Größen (50x50, 80x80 und 50x80) und mit verschiedenen Befestigungsbohrungen (Version X.0 mit Flachsenkungen (z.B für Linsenkopfschrauben) und die Version X.1 mit Kegelsenkungen (z.B. für…

The USB-C cabel protection

Hello, This is my new model of USB-C cabel protection. I made it, becauce I know that many of these cabels broke while using. Soo if you want to print this model, here are some important informations about this model. This model fits only…

Cabel_Holder

Cabel holder for Xiaomi adapter, will not work for Apple cabels

Cabel_Holder

Cabel holder for cables from Apple

CabelHolder

Simple cabel holder for side of the table.

CabelHolder

Cabel holder for cable from Lenovo Legion for side of the table

Cabel cover

Simple cabel cover with standard screw

Earbud/headphone Shirt Clip (for cabel allowed to move back and forth in the clip)

I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…

Cabel organizer (Cabelnizer-7)

This is tiny cabel organizer for seven conventional cabels. It can be fixed on the furniture or apliances surface with double-sided tape. Dimensions: lentgh 120 mm, mount surface width 16 mm, thickness avg 2 mm. Cable pit width 5 mm. 3D…

Cabel clip

Cable Clip 3D Print Instructions Material: PETG Layer Height: Recommended 0.2 mm Nozzle Temperature: 230-250°C Bed Temperature: 70-90°C Scaling: Adjust model scale to fit your cable size Cooling: Moderate (50-70%) to avoid layer adhesion…

Cabel Guide for Eutrec 3 phase power rail

For anyone who needs to attach additional cables next to or under the Eutrec 3 phase rails. Für alle die zusätzliche Kabel neben oder unter dem Eutrec 3 Phasen Schienen befestigen müssen.

Gridfinity cable organizer BIG cabel (2x3)

This can hold bigger cabels than my other holder . The Lable shelf in the image is 8mm to wide. to conform to gridfinity standarts, i fixed it for the file

Cabel organizer x14 (Cabelnizer-14) ver.2

For mounting with double-sided tape

Table cabel organizer

Enjoy!

Under table cabel holder

Simple cable organizer under the table. Organizes cables mainly keyboard and mouse.

Cabels holder

I divided the holder into 3 sections, models to download.

Cabel holder with honeycomb design

Cabel holder with honeycomb design recomended layer height: 0.2mm

Labor cabel holder insert

I have a metal cable holder for banana plug labor cables. Other cables with plugs that are a bit smaller like audio, usb, barel jack, … fell through the slots of the holder. This insert should fix this issue. Print instructions: nothing…

holl on cabel

holl on cabel

Cabelcuff, Cabel tightener / cable Clip

As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…

5mm cabel clip for microphone arm

I designed a 5mm cable clip that fits perfectly onto the printed microphone arm, which I got from @Neevoet. https://www.printables.com/model/962164-adjustable-microphone-arm The segments of the arm feature 14mm hexagonal holes, and I…

Under table cabel holder V.2

Simple cable organizer under the table. Organizes cables mainly keyboard and mouse. (The variant where only one screw is needed)

Robot Lawn Mower cabel connector- Rasenmäher Roboter Kabel

Hi I disigned a Robot Lawn Mower cabel connector- Rasenmäher Roboter Kabel To repair the Cable in the garden. or improve the Cable managment. → do yourself a favor and dont use the AL- Cable that is mostley send with the Robot Land Mower,…

Voron Cabel Clip

A cable clip to guide the Canbus cable along the PTFE tube. Only a small cable tie is needed to attach the clip.

Cabel Labeling sigle Wire - Kabel Beschriftung Aderbeschriftung

Hi so i designed an sigle wire labeling part. It is for (cable wired in the house, single rigid cable) ( example, EU norm use NYM-J3G1,5) -> 1,5mm² -> 2,5mm² -> 4mm² -> 6mm² -> 10mm² ---> need to print it in 0,1 mm layer hight simply to…

Robot Lawn Mower cabel connector- Rasenmäher Roboter- hacken

Robot Lawn Mower Cable Case - Rasenmäher Roboter- Kabel Für Begrenzungsdraht - boder restriction cabel --> INFO <-- (reason why i made it) --> I hade some problems with a wire splitting. Or some higher resistance with the cable. After the…

Cabel Chain round flex

Cabel Chain round flex Simple Thing Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Hobby

sovol sv07 cabel holder

For the cabel holder you need 4 cable ties.

Cabel clip

Will fitt up to 5mm cabel. 3mm Screw hole. Smal cabel clips i need for the home built arcade cabinet.

19" and 10" rack cabel clamp

(deutscher Text unten) Since I have never found suitable cable clamps to guide the cables neatly to the front in a rack, I have constructed my own. They can be printed in PLA without support. I have not tested whether the clamp can be…

Pax Cabel Management

Cabel Management for Ikea Pax System I recommend printing with Brims for better adhesion.

ESP32-C3 Super Mini cabel AddOn

A Cable Add-On to Communicate with Proprietary Mahr Hardware from 2000: The Mahr Extramess 2001 Hardware Setup We used two main hardware components: ESP32-C3 Super Mini A compact and inexpensive microcontroller that supports USB and UART…

Cabel clip Ender 3

Print standing

Flat Wago bracket / holder, electric cabel concentrator

I needed a holder for connecting electrical wires in my winter garden. It had to be flat to fit inside a purlin and have a way to secure WAGO connectors. Cables can also be fastened with zip ties. Maybe it will be useful to someone else…

Jumper Cable Winder / Compact Organizer Arduino / Esp cabels

With cable winder, you will organize and managment your jumper cable very easy in compact space like electronics box or take it outdoor. 😍 It fit up to cabels 300mm long. Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4…

X and Z CabelChain for Tronxy X5S

.

Caution! Cabel on the floor! Sign

Summary Fully printed hinge – just slide a short piece of 1.75 mm filament through the holes to pin the two halves. Printing I would recommend 0.2 mm layer hight. For color change swap filament on preset layers.

MagRGB secret lab Panel holder for cabel

A holder for the thin cable that connects the hub to the light.

Omega Cabel Clip

Build from technical Drawing in Fusion360. Printet in PETG.

kabel halter organisator teskt cabelholder

ein vielseitiges kabelorganisations modul, gut für elektronik und ordnug

hermit crab 2 cabel support

Кронштейн

cabel holder

cable holder for 17mm table (sorry for the picture it stop in the midle of it)

Reusable Cabel Tie (10 min/0,9g)

🧩 Reusable Cable Tie (Less than 1g of filament!) This reusable cable tie is a simple, lightweight, and super practical print for your workspace or cable management setup. It uses less than 1 gram of filament , so you can print a bunch of…

Earphones cabel holder

Earphone cabel holder / cabel organizer

Cabel Holder

en A simple cable holder for cables up to 6 mm thick. I designed this holder because I wanted to neatly hang my network cables (Cat 6) on the wall in my basement. The holder works for all kinds of cables — I use it for both USB and LAN…

Cabel Duct

General and use case This model is a cable duct designed especially for workspaces with frequently changing setups. It doesn’t require zip ties or any other permanent method to hold cables in place. The teeth allow you to twist and…

Phone holder skadis + cabel holder

This is a model in which you can place a mobile phone. This model is designed for IKEA SKÅDIS , so it holds nicely. The model measures 84mm x 25mm x 60mm, and it should fit most phones. There is a grid at the bottom for better cooling,…

Desk mounted cabel channel

A small cable channel designed to mount on the underside of a desk placed close to a wall when mounting to the wall would be difficult. It should be printed standing up, as it does in the picture, and at 100% infill. If it is too short or…

cabel gland for motorhome 10mm wall

prints with some support, i used paint on support and ironing on the top layers.

Cabel Organizer V4 / Kabelwickler V4

hey um die label in der schublade zu organisieren ein einfacher Kabelwickler, hab spass beim drucken Hey to organize the label in the drawer a simple cable organizer, have fun printing

Cabel Stand

cabelclip

This is a simple and practical cable clip designed to keep your desk or workspace tidy. It holds USB cables, charging cords, or headphone wires securely without the need for screws or glue. The clip is easy to print, uses very little…

SanDisk Extreme Portable SSD (SDSSDE60) - More space for cabel

Remixed case with more space for cable.

Cabel Tube

Beschreibung des 3D-Modells This modular cable channel is designed for clean and permanent cable routing under desks, along furniture, or on walls. Key Features: Modular & Expandable: Connect multiple segments in a row to reach any…

Modular cabel organizer for Desk

Easy to print

Cabelorganizer

Cabelorganizer for 6 cables. Designed for 5mm screws. Just print and have fun. Check my other posts too.

Cabelholder for 30x30 Aluprofile

The holder can be printed without supports if it is printed on its side. Because it is made of TPU, it adapts to the slightly different dimensions of profiles from various manufacturers. (The cable tie is also 3D printed — search for…

Cabel Clip

Cabel Clip with a flat base, can be used with double sided tape. Cabel clip with a 10 mm hex base that can be held in place in a hex screw Category: Tools

Kabelführung parametrisch / Cabel guide paramtric

This parametric cable management system is designed to be fully customizable to suit your individual needs. You can freely adjust the number of cables, their diameters, and the overall width of the part. This makes the model suitable for…

cabelholethinghy for the desk

fits a 63 mm hole

Cabella's Muskoka Chair cupholder

Its upside down in the file. Flip it 180 degreed for best results.

Mujer de cabello largo

COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA

STEALTHBURNER NITEHAWK SB CABEL FIXATION MOD

i made this upgrade for myself . because i do not use the cable chain for my toolhead cable . and i wanted to fix the woble connection of the cable so it does move les when printing . also to try to have les nhk problems . i hope you like…

Cabel gromet

simpel cabel gromet design to fir Adax ovens

Splitt cabel gland 1/2’’ NPT to 5mm

Splitt cabel gland for 1/2″ NPT equipment. 5mm hole for cable. Printed in PETG using a 0.4 mm nozzle and 0.2 mm layer height. Place on flat hex side. No need for supports.

cabel hook for ikea galant

small hook for the galant tabel from ikea

Prusa Frame Cabel Guidance Clips

To guide the Cabel, in my case for a MMU3 to the back side of the Frame of a Prusa i3 Mark 3 (possibly Mk 4)

cabel holder

This is a cable holder and it is my first 3D model I created.

BMW R1150RT ABS Cabel holder

A simple ABS cable holder for the BMW R1150RT and similar models. I use them instead of a cable tie.

Long power cabel cover for 6 outlets

Pictured my first prototype, fixed mistakes and now it should work better! Also changed the lid to support modular stacking. Box parts fit in Prusa Core One bed and can be printed in one go. Due to the length, had to be designed in half.…

Multi - Cabel Organizer for USB-Hub

This allows you to create your own powerhouse for charging all your devices at home. We use ours in a small cabinet as the main charging station for our daily devices. It has 2 QI chargers for watches, 2 QI chargers for mobile phones, a…

Cabel Spool Cabel Organizer Cabel Reel

I wanted to create my own cable reel that was stable and easy to print and use. I think I succeeded quite well when the two parts are printed, they fit into each other, place the cable in the gap and twist the parts towards each other.…

Cabel Bend protection

A small collection of bend protectors for replacement on old joysticks when replacing cables. Each protector must be adapted to the respective cable separately, because there was hardly a standard in the old times. best use with TPU

Cabel Clip for Cage Nuts

Cable Clips that fit into squares for cage nuts. Can be used for server or control cabins, for example. Printable without support (sidewise).