Liczymy pasujące modele…
This is a small “quick and dirty” mount I designed for the Halo Screenbar that allows for mounting of I'd say most normal Webcams, in my case a Logitech Brio. There is an original part available for purchase from BenQ, but it doesnt quite…
Holder After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture) Camera mount Remove the support, drill out the holes…
Posted with prior aproval of @jorge_rui Instructions; 1) Print the front plate from the original Prusabot page (paid model) and print both parts from this listing 2) place the nuts inside the mount and screw both halves together, the…
Cameramount for a Nightvision Raspberry Pi Camera on the X-Axis of my Prusa MK3 Printer. This is a Variaton of these designs: https://www.thingiverse.com/thing:2802522 https://www.thingiverse.com/thing:2873677 Thanks for the idea! You…
A taller version of the original that sees above the print board.
Designed for the Logitech C925e camera, but accepts all standard cameramount 1/4-20 hardware on the camera side Bolts to the X Axis with an M3x16 bolt Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
A mount for a LSC Smart Connect IP-camera
I made a pi camera mount that lets you mount your camera to your Enclosure. I put some magnets into the base and back piece. I used 4 Magnets diameter below 8mm and with a hight below 7mm and a Pi 5mp camera. In case you dont want to use…
I ran into the same problem that the top camera was very low. The spacer by @jm moves the camera up 4mm but i did not have M2,5 bolts that were 4mm longer. So instead i used some random M2 screws (they can be sourced from an old laptop or…
These are some brackets in order to hold the following camera. Remixed from the files Tech2C released. I will post some pics of the thing in real life once my esc are in and i can finaly assemble it again. Print instructions Category: R/C…
---> English Cameramount for ⌀16 and ⌀19 - Tapo C200: I made a cameramount for a Tapo C200 that I use in a grow tent. No supports needed. Add 3x M4 inserts Done. I'd be very happy to receive some feedback. :) ---> German Kamerahalterung…
This is a remix of @Karsten_178866 's perfect solution to mount the Buddy3D Camera to your Prusa XL. I did not have the right size of magnets laying around so I remixed it to fit round magnets with the diameter of 8mm and a height of 4mm.…
Raspberry Pi Camera Mount I had a camera attached to a gooseneck mount to take time lapse videos of the bed of my 3d printer while printing (via the fantastic Octoprint running on the RPi in the picture), but it kept getting in the way,…
Print the model laying down and use tree supports for the thread. It is more durable this way and doesnt break that easily.
Anycubic Mega X RaspberryPi Cameramount
This Cameramount allows 4 iPhones to be lined up on 4 sides in order to project a Mahjong player on Stream like YouTube Live. You can be creative in how you place and compose your camera. ■You need… W1/4 Hexa Screw × 5 W1/4 Hexa nut × 5…
Instead of the 2020 Extrusion mount in the remix by @ORDEEP, I substituted a 02.5-20 threaded stud, like those used on camera mounts. This allowed me to then mount a Raspberry Pi Zero 2W (mounted in the Raspberry Pi Zero W Case w/Camera…
A holder with which you can quickly and easily connect your Samsung T7 SSD to your camera. Easy to assemble, as there are 1/4-inch threads all around the holder for fastening. You may need to shorten the printed screws to the correct…
Print the model laying down and use tree supports for the thread. It is more durable this way and doesnt break that easily.
Zweiteiliger Kamerahalter mit Magnet 10x3mm. Ich habe beide Teile verklebt. So kann auf Supports verzichtet werden. Gedruckt habe ich mit PLA+ 0,2mm Layerhöhe.
Zweiteiliger Kamerahalter mit Magnet 10x3mm. So kann auf Supports verzichtet werden. Gedruckt habe ich mit PLA plus 0,2mm Layerhöhe.
