Liczymy pasujące modele…
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
Made for Elegoo filament rolls. The rings snap in on pairs of holes Elegoo has running around the edge of the roll. The images were printed in Prusament Galaxy PLA, because I had just a tiny bit left and they don't take a lot of filament.…
I originally downloaded 4 sets of the Universal Spool Adapters from Humebeam, but then realized that they're too wide with most of the Polymaker cardboard spools I have. That led me to design my Cardboard Spool Rims found here:…
Cover de bobine pour les filaments Printomax 3D Couche 0,2 Remplissage : Gyroïde 8%
Introduction I was able to reduce the rolling friction on the Siraya Tech carboard spool with this plastic insert. I found it helped a lot with printing flexible filaments that easily under extrude from feed path friction. As pointed out…
I printed several Bambu Lab Reusable Spool Holder Remix Four, I tried putting a roll of Inland filament on the spool by removing the cardboard ends of the Inland spool, but the hole was a little bigger than the printed spool, so I used…
Tearing the sides off of Overture carboard spools works pretty well, but there's the problem of the spool spinning while trying to retract when it gets low. This insert solves the problem by sliding in-between the core of the carboard…
Suitable for DREMC cardboard spools with holes cut out allow you store filament loosen end without the need to remove the plastic ring. More Information:…
Made this to suit my cardboard spools I buy from a local supplier and my AMS. I printed in PLA to start and also did one in PETG. Both worked great with no support needed at 0.2mm layer height. Has spikes to aid in gripping the cardboard…
This protective cover, designed by Kingroon, is for 3D printing users to prevent cardboard spools from deforming in the AMS. It's best to 3D print it using PETG filament .
California Filament THE BEST PETG filament I have used for the Prusa printers in the states . https://californiafilament.com/ this is an insert for their new cardboard Spool holders and it works like a charm . If you want to try their…
i love the original design of this cutout by coolantmoment , but just too busy to print the case that fit this cutout, like Kermit case. so i decided to make this remix cutout to fit inside the original FLIPPER ZERO Cardboard Box, and now…
The carboard spools on rolls of filament from Microcenter and Polymaker are great for the environment... but they do not unspool as smoothly from a rod style spool holder as the old plastic variety used to. The spools carboard inner rim…
version 2 now up larger main spool chamfered and larger bolt. i was sick and tired of the cardboard spools not fitting on the re useable Bambu spools or the ring adapters falling off and jamming the ams unit so I've designed a threaded…
I saw the original infinitely adjustable picture frame and thought that I could make it work using some of the cardboard I had laying around. I modified the amount of space in the model so that it was wide enough to fit a piece of…
I liked the design of the original ring, but noticed it would sometimes slip and the spool with spin inside the cardboard. I added a nub that slots into the divots on the carboard spool's inner tube.
As we all know the Bambu Lab AMS does not really like light cardboard spools. This insert fits into the Overture spool and weighs about 180g when printed at 100% infill. Or use the hollow model of Part 2 (155g) and insert a 10x40mm brass…
A little cardboard stand (or as large as you scale it). Sturdy and prints with no supports. We use these in conjunction with cardboard screws to set up little make shift pens for the kids rats to run around and tear up. Also handy to set…
Reusable adapter for Sakata filament cardboard spools I use it for spool holders with bearings. I recommend printing it on PETG
flip it 180 degrees for less support usage
Gangway for cardboard square tower. Depending on height, several of these could ring the tower. Floor can be mesh from screen door, cardboard, or drawer liner. Guard Tower can be found here: Do-It-Yourself (DIY) WH40k terrain Collection…
In order to adapt the TechTom model to my use (reprack for my MMU3) and the fact that I didn't want to buy any specific hardware to make the spools heavier, I modified the core file so that I could put in what people have on hand (in my…
Filament refills are more and more common but the cardboard tube size is not standardized and MasterSpool designs waste a lot of filament. TubeSpool is a parametric model made to be adapted to all tube sizes. Based on the design of the…
this is for the cardboard mouse arcade
This improved version makes screwing in the great screws easier. It has a bigger point, larger holes are easier for kids to get the screws started. Handle is chunky, easy to grab but corners are radiused for comfort. I printed it on its…
Modified so I can use it with https://www.printables.com/model/1020328-modular-gate-stand-for-tinywhoop-fpv-racing-gates
Just a random bar holder from carboard tubes that fits almost all types of bars. The hole in the center should be ∅68 mm and the channel 3.5 mm wide. There are two parts, one for the bottom and one top. Print Settings Printer Brand:…
Spool Spacer for Qidi X-Plus for use with carboard spools on the internal spool holder. When using some carboard spools with the X-plus's internal spool holder, they can get jammed if they have a lip or overhang at the spool hole (see the…
A large hollow threaded bolt to enable the reuse of carboard spools with spool refills. Simply pull the two sides away from the center of your empty cardboard spool, you should be left with the sides as pictured. Now put one either side…
Tear off the Cardboard Spool wheels. Put the filament bundle into the Hub. Stretch the Spacer and push or smash it down towards the middle of the filament hub. Screw on the the cap with 3mm short screws. designed for the SLic3d filament.
Introduction I was able to reduce the rolling friction on the Siraya Tech carboard spool with this plastic insert. I found it helped a lot with printing flexible filaments that easily under extrude from feed path friction. As pointed out…
