Liczymy pasujące modele…
This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place. Requires a pair of 10Ø x 3mm magnets. You can also purchase the .stl files for a 70mm, 100…
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
Simple deckbox designed to hold up to: 100x triple sleeved TCG/CCG cards (perfect for EDH) 150x double sleeved TCG/CCG cards 185x single sleeved TCG/CCG cards` 320x unsleeved TCG/CCG cards Current design, print 2x of the model (I printed…
I designed this case in Fusion 360 for an Aqara door sensor mainly to use it for projects where I use this sensor as a general purpose zigbee sensor and I prefer something a bit smaller. There are 2 versions, one with a hole and one…
This is a remix of the lid models created by Martin_au to allow for Dragon Shield card sleeves. I simply added .8mm to the height of the lids to allow enough clearance for the lids to open/close while containing cards enclosed in Dragon…
Card divider for standard size (~66x93mm sleeve) ccg cards. Prints in downloaded orientation and uses a small amount of filament.
The original make was designed to use a length of PVC plumbing pipe as the crossmember. I encountered photos of a build which used metal bearings on a roller assembly. Before I could chaise down any information, I designed and printed my…
The original make was designed to use a length of PVC plumbing pipe as the crossmember. I encountered photos of a build which used metal bearings on a roller assembly. Before I could chaise down any information, I designed and printed my…
I needed this Roller Shaft/Crossmember to fit my version of the Flashforge Adventure 5M TPU Holder. The other components of the build are on my Model page. There are 7 sections of the TPU Holder including this roller shaft. I printed this…
Organize your CCG collection with these printable dividers, perfect for cards stored in portrait orientation. Created with Magic: The Gathering cards in mind, these dividers should be compatible with most standard sized CCG cards. The set…
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
6/24/2020 Added V5 files for all the class decks and sliding lids.Print one box and one lid for each class deck. Box options for hex or solid sides. This is a customizable deck holder. It can be configured to allow vertical insert of the…
Summary This is a gloriously over-complicated box for storing cards, or anything else really. As the lid is opened the platform rises, presenting the cards. There are pre-layed-out plates! You can now select from 7 plates to greatly…
In comes my new deck box! The standard bottom holds a 100 sleeved cards. The smaller bottoms make a great way to store dice and extras you may want for any gaming session. The top is a universal fit to any of the bases as well as the…
Insert to fit into "2-Player Rival Box" for My Hero Academia CCG. Didn't want to waste the high quality box, but couldn't have decks just sliding around inside, so I designed a simple insert to hold 3 sleeved decks with an additional…
The text represents the "Canadian Coast Guard Ship Terry Fox", which is a heavy icebreaker. I've included a version with the text and one without.
The ultimate pair for my CCG Deck Holders (Orig Mk I and Mk II ). This scaled replica Engineering Field Kit from ST:TNG holds 8 of my mkII deck holders. This is a great way to travel to and from tournaments or, in my case, on vacation and…
If you have a mobile raised bed from Costco (Cedarcraft model CC_SW2147A) with the bug screen option (CCGC-21-B) then these clips will hold the screen down against the side of the bed to keep birds and small animals out. I printed with…
An insert for the MHA CCG Rival Box to hold the decks in the original box. Note - Has not been test yet.
Includes new boxes for both Pokémon and D&D. Made for 70mm card holder.
Diese Halterung habe ich entworfen um den Bluetooth-Fenstersensor von Xiaomi versteckt im Fenster einbauen zu können und um bei einem Batteriewechsel nicht jedesmal den Kleber (am Fenster/Sensor) abzureissen und neu zu…
A little case for the Cologne Chip GateMate CCGM1A1/A2/A4 Evaluation Boards and Programmers from the GateMate FPGA Starter Kit. The evaluation board sits snugly in the case itself and is held down by additional screws. The original rubber…
Updated version of my deck holder . The major update are stronger ‘locking’ side lugs to hold the lids on over time. My original lids would slide off as the plastic wore-in and the friction ‘clutch’ was lost. Here is the original…
Similar to my Star Trek box, this was designed to hold my Star Wars CCG cards when travelling to tournaments or on vacation. The boxes hole ~600 cards divided into light side and dark side. The sliding lids are held in place with magnets.…
I've been slowly protecting all of my old games and collectibles. Having also been getting back into the Star Trek CCG, I created these 60-card deck holders. Once you start, you don't stop so I also created 6 lids based on the race of…
Trae a tu espacio una de las joyas más exclusivas de la ingeniería de carreras: el Koenigsegg CCGT . Diseñado originalmente para competir en la categoría GT1 de las 24 Horas de Le Mans, este hiperauto de carreras impulsado por un motor V8…
The ultimate pair for my CCG Deck Holders (Orig Mk I and Mk II ). This scaled replica Engineering Field Kit from ST:TNG holds 8 of my mkII deck holders. This is a great way to travel to and from tournaments or, in my case, on vacation and…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
