Liczymy pasujące modele…
The armrest latch of the Kia Ceed is prone to breaking. This is a known problem. I designed and printed this replacement part for a friend. I put i here so it might be usefull for other people as well. Designed with Freecad. Printed with…
This is just a toy, do not use in a car )
The Kia Ceed (CD) Series has a deep storage container. I like the design from papabravo so i make a new one for the ceed series. There are some variants for every use case. For the variants with a handle use more infill (in this area) for…
I lost one of the plastic roof rack clips from my Kia Ceed, so I made designed and printed one myself! It doesn't look exactly the same but it's close enough for the untrained eye. Did the job perfectly. Print instructions Category:…
Hello! I had a problem with a broken latch on my car, so I made one myself in Fusion360. It's slightly modified so it's not as big as the original.
The Kia Ceed (CD) Series has a deep storage container. Printed with PETG in order to handle the temperature inside car in summer. Works good enough with 2 perimeters and 15% infill, but to make it strong enough and light at the same time…
Dipped beam headlight cover for kia ceed. required original rubber grommet. made for mounting HID headlight There is also a version without the hole
Kia CEED/XCEED bj 2018 Mittelkonsolen Halter.
Windshield Wiper Cap for Kia Ceed
Functional centre console/armrest storage compartment latch to replace broken one from a Kia Ceed 2016. Model by Rankoh. Reupload from Thingverse.
Kia proceed GT MY 2022 (also compatibel with Ceed or Xceed or older Proceed gens) phone holder (Handyhalter) for Xiaomi Mi car wireless charger 20W https://www.mi.com/de/mi-20w-wireless-car-charger/ Printed in 0.16mm layer, could also go…
Getränkehalter Einsatz für Kia Ceed, damit die Dosen besser halten und nicht mehr umkippen können. Cup holder insert for Kia Ceed, so that the cans hold better and can no longer tip over.
This adapter enables you to use semi-integrated Specialized SL7 spacers and stems on the Seka Exceed. The adapter in the picture was printed on a HP Multijet Fusion (PA12; via JLCPCB).
WARNING - YOU ARE ABOUT TO EXCEED THE LIMITS OF MY MEDICATION, sign Category: Signs & Logos
It's very difficult to find a good phone holder for my car, which is a KIA Ceed GT. The standard phone shelf is not comfortable at all. In my previous car, I always had the phone in front of my eyes. Here it's hard to mount the phone to…
This is the cap of the head lights of KIA ceed 2008. You still need the rubber seal.
bottom part REMIXed for Canyon Exceed CF6
Extend frame for mobile holder for Kia XCeed (facelift from 2023). The air grille in the Kia XCeed is very low and the steering wheel covers the mobile phone display. I made special frame and placed it a little higher. No screw needed.…
I've designed a Trunk curtain retainer for KIA CEED SW (2006-2013) The original numbers are: for left 859371H600, for right 859381H600 This 3D Model was printed with ASA and ABS filaments. This is my third design in Printables, so please…
Printed with PETG at 0.2mm layer height, no supports
Roof plugs for kia ceed sw or vehicles with simmilar racks. Should be priinted upside-down. May be improved with slight curve to the top. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: Variable Filament: Creozone…
Printed with TPU to replace the rotten original.
After the Spirit FF, I had the chance to get my hands on the Nichimo Midships thanks to my Australian friend Jason alias Bormac. I modeled the car, and you will find the stl of the plastic parts for this car in this publication. I also…
EN: Since the manufacturer does not supply an ashtray or other compartment suitable for small waste (especially parking tickets) in new cars, I made my own. The bin can be placed in the left/right front door in the place designated for…
Mounting mandrel for centering the clutch plate Kia Ceed JD 1.6 GDi
WARNING - YOU ARE ABOUT TO EXCEED THE LIMITS OF MY MEDICATION, sign Category: Signs & Logos
I made a simple bolt to attach interior upholstery to bodywork of Kia Ceed. The original bolt breaks when pulled out during repair your car. My bolt is a reimbursement of original. Filament: PETG, better ABS or ASA Supports: NO It is very…
Wheel bolt cover 21mm for KIA CEED (in my case GT version), PROCEED and others. I suggest printing one model to check the fit, there are 2 versions to choose from - normal and tight. Print with ABS or ASA - prefered.
31K pistol I made after seeing the pistol on the side of the arcade case. Buy M or L hardware. Printed magazines are in the files or compatible with modified nightingale magazines or unmodified AIT 40 max lightingale magazines. Hardware…
Print settings: Project file provided as reference for the settings I have used. You can toggle object visibility and arrange on plate to print the project bit by bit. Designed for printing with 0.6mm nozzle to speed up the process, but…
Víčko nádržky brzdové kapaliny KIA SEED s logem KIA GT
you need to scale it slightly. enjoy your keychain
Biete hier ein Modell zum selber Drucken an. Kia Ceed cd Wischwasser Einfülltrichter Wenn gewünscht kann auch gern Gedruckt werden.
KIA CEED lettering for the front grille. I've uploaded two designs: one for mounting with cable ties and another for attaching with glue or double-sided tape. It's designed for any type of bed, but feel free to scale it to your preferred…
Man, not really sure if anyone out there would be in need of this. Simple design challenge to keep my little brother happy and what's better than to share it with the rest of the world and possibly help someone else? :D The picture is of…
Printed with TPU to replace the rotten original. Original spare part number 281172H000.
Jednoduchá polička do odkládacího prostoru pod panelem klimatizace pro vůz Kia Ceed (testováno na r. v. 2023). Vytváří rovnou plochu a zabraňuje tomu, aby se telefon za jízdy překlápěl nebo vypadával z původní přihrádky. Nastavení tisku:…
Это корпус подсветки номерного знака. Внутрь устанавливается 2 отрезка светодиодной ленты 12В. Я устанавливал 2 отрезка ленты 5050 по 3 светодиода. Спереди необходимо вырезать и приклеить на герметик прозрачное стекло (я использовал…
I made a centre storage tray bottom for Kia Ceed (CD). It may be combined at the same time with upper storage tray, where I was inspired, available at: https://www.printables.com/model/126565-kia-ceed-cd-centre-storage-tray-console or…
This SD version Exceed model have a big space inside its fat body. Great for placing some other small toys inside to make a funny screen. This part holds the head in a 30-degree opening. Just like the characters are cosplaying as Zaku.
A slightly modified model to suit my needs. I added slots for SD cards with a reader, USB A and USB C pendrives, an OBD2 diagnostic tester that I sometimes use, USB cable and 2 pen holders to prevent noise while driving. I left 3 coin…
Outsite: 83,5mm Insite 54,6mm For 0,33ml can like Redbull (diameter 54mm) For Kia Ceed JD (MY 2013-2017) i use the 5mm prototype model and its works fine. I have create 3 models with high 5mm, 15mm and 60mm Print Settings Printer brand:…
The key fob for an old Kia Ceed broke, so I decided to try to fix it myself. It consists of 5 parts, easily printed in PLA or PETG, without support. For the buttons, you need TPU. P.S. On the cover photo I have not glued the metal key…
Project: CeeDee Lamb-Football HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm PLA SUNLU Basic Blue Transmission Distance: 4.4PLA eSUN Cold White Transmission Distance: 1.2 This print uses 2 unique…
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
My original usb port was very slow at charging, and there was an extra place for an accessory . You need some electrical knowledge , you need a piggyback fuse yoke. i just hotglued the pcb inside. different case for 2 different pcbs find…
Headlight dust cover to replace original if its broken or lost you can add large O-ring, it fits better
Need to be glued from inside through hole.
Scout Carry for a Exceed Design TiRant utility knife I added some adhesive foam in the bottom. https://exceeddesigns.com/product/tirant-razor-v3-titanium-edc-utility-knife-stonewashed/
DISCARD OPTIMISM ALL BEINGS WHO PROCEED, sign Category: Signs & Logos
Joyetech Exceed Grip Vape Stand
DISCARD OPTIMISM ALL BEINGS WHO PROCEED, sign Category: Signs & Logos
I have KIA ceed 2025. I like speed limit sign (bottom position) being displayed (with warnings turned off), but I hate the warning sign (top position) being very often false-positive. AFAIK the top sign can't be hidden by SW setting, so I…
Printed with TPU to replace the rotten original. Original spare part number 281172H000.
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
Wheel bolt cover 21mm for KIA CEED (in my case GT version), PROCEED and others. I suggest printing one model to check the fit, there are 2 versions to choose from - normal and tight. Print with ABS or ASA - prefered.
Biete hier ein Modell zum selber Drucken an. Kia Ceed cd Wischwasser Einfülltrichter Wenn gewünscht kann auch gern Gedruckt werden.
This is the cap of the head lights of KIA ceed 2008. You still need the rubber seal.
Scout Carry for a Exceed Design TiRant utility knife I added some adhesive foam in the bottom. https://exceeddesigns.com/product/tirant-razor-v3-titanium-edc-utility-knife-stonewashed/
Replacement buttons for the overhead interior map light unit in the Kia Ceed MK1 (ED) , produced between 2006 and 2012 . Original buttons in these cars often become sticky, scratched, or the plastic clips break over time. These 3D-printed…
History. The lamp is a cabin light that turns on when the car door is open or manually and a place for eyeglasses. This place for glasses was broken by trying too hard to close it. I wanted to design only the element for glasses, but when…
