Liczymy pasujące modele…
The mini clipboard holds half-letter-paper pages. The pen clip securely holds one 10mm-diameter pen, like Pilot Frixion, Pilot G-2, or Sharpie S-gel pens. To save paper, I use half-letter paper pages when working with students or writing…
This is a convenient clipboard, designed to be simple, intuitive and easy to use for practical use. The clip section only takes up 7mm of paper so you can save paper. It uses four 8*3mm neodymium magnets (two for mini versions). All parts…
A clipboard design with oversize clip that can be entirely 3D printed. An alternate ‘flat’ version can be printed which uses a metal binder clip from your local office supply store, but what's the fun in that :p This model looks great…
This pen hold is designed with a standard 5/16" Diameter Bic Pen and a standard 1/8" clipboard. Holds the pen perfectly. Must print on side for strength and flexibility as well as no Supports.
Pen holder, to be attached to a clipboard with double sided tape or glue. Two versions uploaded, 20mm square base and 1" square base. Pictured is the 20mm. Can be printed in 15 min or less and requires no supports. Printed in PLA. I'm…
This is a clipboard stand for up to 3/16" clipboard thickness. Print instructions I designed this stand using AutoCAD and printed using 0.3 Draft with 15% infill.
Hold your paper pages with this beautiful clipboard Alpine.
Überarbeitung meines bestehenden Clips, die abgerundete Form ist stabiler und sieht schöner aus. Mit diesem Clip können Stifte einfach am Klemmbrett befestigt werden. Eine Bohrung für ein Befestigungsband ist ebenfalls vorhanden. Es…
I love my Field Notes! 🗒But sometimes it can be difficult to write on without a flat surface near by. Also, I wish it would just lay flat and stay open on my desk… Insert the Field Notes Clipboard! 🙌 I keep and PLA one on my desk and an…
This model is part of the Chunky Tool Wall Collection . Collect 'em all! This is a miniature clipboard for US 4x6 or A6 paper. It comes with a peg to hang it on a SKÅDIS pegboard. I modeled this in Fusion 360. I've included the CAD files…
It's really annoying to take notes on a desk mat, so I made this small clipboard to take notes. The clip has to be supported but only on the high overhang, would not recommend supporting the hole.
This model is compatible with the lego system.
I designed this practical clipboard because i would like to have all my notes in one place . It's a 3 part clipboard. Print instructions All you have to do is print the parts and glue the 2 plates together. That's it you have your own…
Mit diesem Clip können Stifte einfach am Klemmbrett befestigt werden. Eine Bohrung für ein Befestigungsband ist ebenfalls vorhanden. Es liegen 2 Versionen zum download bereit: ohne Dorn: einfach auf das Klemmbrett klemmen mit Dorn: mit…
Small clipboard with pen holder Because my co-workers are always stealing my clipboard, I designed a clip for a small clipboard. I have now printed so many that everyone has one (or maybe two?). For the competition I have still designed…
I've been wanting a sliding holder for my clipboard. Somewhere easy to see, easy to grab and easy to put away. But I couldn't find anything on the local store. So I came up with this idea: four sliding pieces that can be used for…
[Français en-dessous] [EN] Puller zipper Printed on Prusa Mini+ Printed in PETG ( Prima Creator filament ) Nozzle 0.25mm - layer 0.15mm infill 10% Depending you filament choice, clip it it's enough in the other way you must glue the thwo…
I designed this clipboard to hold the RocketBook Flip. I felt it justified something more sophisticated than a generic clipboard. It also doesn't interfere with the RocketBook App scan. The two parts are held in place with thin double…
This collection provides magnetic trays and parts for a magnetic clipboard for your roleplaying adventures. You need the following magnets 10mm diameter and 2mm thickness. Simply glue them in with CA glue. Update 1: First suggestions from…
Bring authenticity to your medical and institutional scenes with this detailed Nurse / Healthcare Worker 3D printable model. Dressed in modern scrubs and captured mid-note on a clipboard, this character conveys professionalism, care, and…
So, I had some of this rubber thingies missing from on of my clipboards. They really help to hold the papers in place, so I decided to make some!
This is a micro-clipboard sized to a field notes book with a K6ARK paddle mount integrated on the underside. It is designed to allow you to have a firm surface to hold the field notes book while logging as well an easy method to “hold”…
Replace your broken or missing DEXAS Dual-Sided Clipcase Clipboard Latch
I bought a pack of 9x12" clipboards that have a dry-erase whiteboard surface and wanted a way to mount it to our door so the family could write reminders for each other. Mostly it's for the parents to write reminders for what to bring to…
Glued to the bottom of the clipboard (hot glue). Dimensions fit for DIN A4 narrow side. Outer dimensions of the shell: 202 x 24 x 20 mm. Designed for Maul 23920. The recesses for the rivets are quite large, should fit other DIN-A4…
A pegboard fitting for storage or organization of thin things like clipboards, notepads or notebooks, etc. The photos say more than anything I could write here. Part of what makes this work is a 90 degree curved set of top pegboard mount…
I've had this beautiful little wooden clipboard for years and could never get a pen to stay attached to it. This clip was designed to fit the thickness of the clipboard and the short, fat pen I use with it Customized version of…
It's not very grippy but it's stable, it'll hold your clipboard up in a visible way without falling over.
This is a plastic part that broke in my Audi Q3. It makes rear clipboard hold in place. Settigs: Layer height 0,1mm Suppports YES
This is a small clipboard with a multicolored heart pattern. The clipboard was designed to fit within the print area of a Prusa MK4, but with some small alterations could also be made to fit on a 235x235 print bed. The model includes…
cut a thin sheet of plywood and glue this on!
I printed this on its side (no supports) for increased strength due to the orientation of the layers. It looks like it would print fine on its base as well if you were so inclined.
This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper. The case is sized…
This pen holder can be attached to a clipboard and holds up to three pens. There are two versions: one is loose and may also fit round pens, while the other is very secure, but you may find it difficult to get the pens in and out. The…
I needed a closet compartment for my kitschen to fix some recipies. So i serached the net for something i need. I found some but they did not fit my needs. Then I was inspired by some models and designed my own piece Parts you need to…
I designed this for a local vet to keep medications and paperwork together. It could be used for other applications The tray is secured to the clipboard using 3mm heatset inserts and M3x5 Allen Head Bolts I have included a template for…
This is a simple clamp for a Clipboard to attach a LED Lamp from Ledvance. Im using it for notes and maps in the nighttime. You need to print 2 pieces. Still under development - try to bild it more robust. It suites for following…
Clipboard latch for a Saunders clipboard. Remix of andreh2jm Clipboard Latch (https://www.printables.com/model/313962-clipboard-latch) which was too large. Printed on a Prusa Mini+, .2mm layer height, organic supports, with overture black…
Just a clip for small clipboards.
Simple Snap on Clipboard for the Qube 500 from Coolermaster. Just print the connectors and slide in the clipboard. Print the modules you need. Slice it, like you like it. it is already oriented for print Please do not post this on other…
For veterinary (or human) anesthesia "knockdown" and "reversal" there are often a group of syringes that we need, often carried in a small basin or such which end up in a pile, lending itself to a medical error if labels are not very…
Random office man with bald head and clipboard
My colleague had the idea for me to design him an organizer for the mounted clipboard that comes in Toyota Tonero forklifts as well as many other vehicles. Turned out well enough that i made another version for myself, and then made the…
This is a small fully 3D printed clipboard. If you want to stick to to the fridge you can glue a magnetic sheet to the back, for example https://s.click.aliexpress.com/e/_c3U9Tccf or on amazon https://amzn.to/3UIAFQ3 . If you want…
Bigger / Stronger plugs for pouch. Original plugs was too loose for my taste and pouch very often just fall off.
I haven't used the wireless charging since my phone tends to get too hot, and I sometimes need to write things down. So, I created this solution. It fits perfectly onto the rubber NFC case, providing stability while writing and easy…
I needed a pen holder for the [Biltema Clipboard 28-3319]( https://www.biltema.no/kontor-teknikk/kontor/kontorutstyr/notatblokk/skriveplate-a4-2000064307 ) that fit also the Pilot Frixion Ballpen and could hold it sufficiently good. This…
I have a 2023 RAM Promaster. There is an odd cubby above the radio on the dash. Apparently in older version vans there was a clipboard. Someone suggested that I take a shot at making a cover. I made two. One flat cover and one angled 20…
These grips are designed to snap securely onto the lower wire tension bar of standard clipboard clamps, keeping your papers firmly in place.
PLICO Board System About the project PLICO is a customisable clipboard system designed to attach to IKEA SKÅDIS pegboards. The idea came from a simple need: I have several stacks of A5 paper that I wanted to use more often. I regularly…
This model is designed to hold a pencil, pen, and eraser on a clipboard. It is especially useful for games such as Cashflow or D&D, but it can be used for many other purposes as well. The model uses approximately 5 g of filament. Two…
If you want to keep your tablet safe from scratches, then use some sort of electrical tape on top of that device. Print it from ABS or PETG as depicted on the photo so that the stress caused by a big pile of paper does not split the…
This is a small clipboard for A5 paper, which is my preferred format for notes. Uses a wedge to hold the paper, which gives much neater control over clamping force than a spring would. I intended the clipboard's working surface to be…
Bring authenticity to your medical and institutional scenes with this detailed Nurse / Healthcare Worker 3D printable model. Dressed in modern scrubs and captured mid-note on a clipboard, this character conveys professionalism, care, and…
This collection provides magnetic trays and parts for a magnetic clipboard for your roleplaying adventures. You need the following magnets 10mm diameter and 2mm thickness. Simply glue them in with CA glue. Update 1: First suggestions from…
