Liczymy pasujące modele…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
Marble Castle - REWORK YouTube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
I was annoyed by the flat angle of the interface when its standing farther away on the desk. This stand fits exactly under the interface and angles it up. Still fits full size headphone plug without kinking. The corners are sized to…
Printable on BambuLab 256x256x256 bed (biggest part - base is actually 231.52 x 251.08 x 127.54mm) - just let it auto rotate it. Supports for long overhangs are recommended (I used auto tree supports). No screws (other than for securing…
non-return valve for ventilation pipe diameter 140 mm and 200 mm
This is a large seven-sided die that is a double numbered D14 die. Original Onshape design is here . Rough overall dimensions at 100% scale are: 104.2mm x 90.8mm x 78.9mm. Rotate print so that one face is down. Print without supports.
These are taller shock towers for the 3Dsets model 14 Max Van, allowing for use of 70mm or 90mm shocks in the front. The original files are from the 3dsets' parts files, I just adjusted the height of the top perch for the shock. I made 2…
I designed this case to serve a dual purpose. Mainly as a Gridfinity compliant tool tray that can be stored in a drawer or on a bench/shelf in the workshop and can also be stored in a closed case to be carried to a work site. The design…
Got a request to design a spare spool for the discontinued Big Baitrunner XT-A Long Cast from Shimano (Item code RD14707) After some iterations this is what seems to work best. Optimized for FFF. Tight lines!
When a main mirror mask is attached to the main mirror, the area between the rubber holders is lost. To reduce this area, it is necessary to print a redesigned mirror holder made of TPU with a smaller holder pad. One of the pictures shows…
It is a quite big design, but makes it also very stable. Printed with 12% infill. Comes with two variants - with and without text. The text variant is dedicated for the Minecraft lovers. Remixed from the model publicly available in the…
This model is the bezel for this wonderful monitor. Sometimes it's really hard to find one. Logo is in separate file.
You bought a BVM D14H5. It came with a 16:9 faceplate. Face palm. And there's almost no way to get a 4:3 faceplate nowadays. So, we print our own. I provided arranged pieces called "AIO" so you can print the same colored pieces in one…
A cover for a modified (voltage upped to 13.5 V) HP server power supply for use as a ham-radio psu. It should fit other similar HP models (Dimensions H38.5mm x W86.5mm). The support part is being used to keep the psu level. There is a…
The battery adapter for the Drill "Performance" PCD144-NZ - created for using the battery STHOR 14.4V 78986. Why? It is almost impossible to find the original battery (Ni-Zn 14.4V 1200mAh "PBAT14-NZ" ) for this drill so I decided to use…
Raises and tilts the Audient iD14 by 25° for improved visibility and easier control access,while keeping all front conne
Can be used to connect a PVC tube D140 male to a DN160 female system. You should use an original gasket of the KG pipes. Groove is provided accordingly. Concentric reduction.
Can be used to connect a PVC tube D140 male to a DN160 male system. You should use an original gasket of the KG pipes. Groove is provided accordingly. Eccentric reduction. Designed for smooth fluid transition.
all D and F series parts are Compatible
Made for M3 screws.
Hier habe ich einen Anschlagpuffe erstellt der für die neuen Haubenschlösser bei Golf 1 und Caddy D14 ist. Er verhindert das der Schlosshacken zu weit nach vorn kippt und beim schliessen der Haube dieser Hacken versehentlich in den…
2x2 gridfinity bin that holds the Canon PowerShot SD1400 IS camera. Also, includes slot for charger. Text is in the .3mf files and not the STLs. This works with the gridfinity grid system.
Description Info for 3D model: You can use this bracket for Noctua NH D14 on AM3 platform. Tested with PLA material on Asus M4A4BT-E (Socket AM3) with CPU AMD Phenom II x6 1090T. You can use original back plate. BOM list: Bolts M4x20 mm…
I had some old Mavic Pro filters lying around that I wasn’t using, and with the new light-sensitive Avatar Pro and Moonlight cameras, I found I could repurpose them instead of using the official Walksnail filters (which I forgot to order…
Designed some replacement spacers for the SilverStone Hydrogon D140 ARGB CPU cooler. They should be pretty darn close to the originals dimensionally. I still have my originals but the geometry was simple enough to whip these up for anyone…
Printed in PETG with 6 walls & 25% infill
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
Designed some replacement spacers for the SilverStone Hydrogon D140 ARGB CPU cooler. They should be pretty darn close to the originals dimensionally. I still have my originals but the geometry was simple enough to whip these up for anyone…
Printable on BambuLab 256x256x256 bed (biggest part - base is actually 231.52 x 251.08 x 127.54mm) - just let it auto rotate it. Supports for long overhangs are recommended (I used auto tree supports). No screws (other than for securing…
A 14 sided dice (d14) that uses numbers that are slightly extended outwards for single color printers.
My cord stopper with a bolt (thread) that stopped the cord. I made two sizes cord stopper - thread diameters - resp. D10 and D14. The D14 has two variants for use - one hole and two holes, by using the same size bolt. You don't need to…
