Liczymy pasujące modele…
This model is specifically for the DELL WD19, WD22, K20A USB-C Thunderbolt Docking Stations (all have the same 9cm deep x 2.9cm height case) and allows the dock to be clamped to the edge of a desk and hide all the associated cables. I…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
I added countersunk holes for the VESA mounting screws. Also a 10mm 2.5M screw are needed for mounting the dock.
Fluidock Mobile Holder Mod22 With this modification , you can use the screen to the bottom ! Printer : Artillery Sidewinder X2 layer height : 0,1 line width : 0,6 no support ; infill 0% ; print time ~ 5 h 40min Sunlu PLA Silk Gold…
Silika Korb Behälter mit Durchmesser 22mm und einer gesamtlänge von 67mm Silica basket container with a diameter of 22mm and a total length of 67mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
For best result PETG or better, 6 layers top and bottom, 6 walls, infill 35%+ cubic. No support needed. orientation as in the photo with these parameters, it will withstand a direct hit from a ball, 1.7 J. I haven't tested higher. You…
Mounting bracket for the Dell WD19 and WD22 docks. BOM: 2x M2.5x8mm socket head screws 2x 8G button head stitching screw, minimum length 15mm NOTE: The original used M2.5x10mm socket head screws, but I had some 8mm ones and they worked…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
This model allows you to place your notebook on top of the docking station. Fits perfectly on the Dell K20A, maybe other. All ports are available and the air vents of the docking station as well as of the notebook are completely free. The…
Its a realy simple broom holder, for aprox D22 handles. Its designed for wall mounting. I used petg. It works for me, hope it works for you. One additional note, be careful at the last mm if you tighten it down with power tool.
Build the amazing Stealthpress designed by Iconic-Fab but you can't mount your generic Amazon Soldering Iron onto it because it has a 22mm Collar? Look no more, download and print this reengineered mount to get your Heatset press fully…
Custom pillar gauge pod holder designed to suit standard SAAS gauges. This model is available in multiple configurations so you can choose what fits your setup. You can print: Single pod Dual pod Triple pod Each pod can be printed…
A hardness specimen that is able to be used with the ASTM D2240 Hardness testing standard with a Shore D Durometer.
Logo Nissan Navara D22 1999
Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…
Replacement clip for the centre console/storage compartment, originally designed for a 2011 Nissan Navara D22. This part should also fit other D22 models across similar years, as the interior design remained largely unchanged. The design…
Mount your Dell WD22 docking station to your monitor stand.
Did a quick build in Fusion to adapt normal hoover tools (from a Henry) to the Hoover FD22 stick vac. Came out surprisingly well! Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Doesn't Matter…
Držák adaptéru pro dokovací stanici Dell WD15, WD19, WD22
I've made a Stand vor my eGo AIO D22 XL Vape. Hope you like it.
Support pour positionner un Dell Latitude verticalement sur une station d'accueil Dell UD22. Fonctionne aussi avec d'autre ordinateurs portables (tous ceux de 25 mm d'épaisseur). Print instructions Impression en PLA, à hauteur variable…
Deutsch Dieses praktische Dock-Design bietet zwei Versionen für maximale Flexibilität und optimierte Nutzung: Version 1 (Kabelausgang unten) : Perfekt für die Nutzung, wenn das Notebook direkt auf dem Tisch steht. Das Kabel wird unten aus…
GoPal kompatibler Halter D22
all D and F series Parts are compatible
My porch light sconces shine directly into the lens, which was never an issue with my old Nest doorbell, but the D225's 180-degree wide-angle lens made the glare a real problem. This cover is a pressure fit, so just push it on! Print…
This is a simple mounting bracket for a Dell USB C dock. It can be mounted with screws using the holes in the bracket, or with double sided gel tape if you are like me and can not put holes in your walls. Check out this design on OnShape
Desk organizer for Brother's P-Touch, PTD210 and PTD220 label makers. It comes with attached and detached label storage. The label maker is fully functional within the holder and it is easy to remove using the slit in the back. The design…
Držák na kamery Dahua
Give a broken Boavision HD22M102M security camera a new life! Boavision MODEL:HD22M102M suffers from one potentially fatal flaw. The wiring inside can shear due to the bad way strain relief is implemented: a piece of helical teflon tubing…
This stand was designed to solve the issue of resting my laptop on the Dell dock and having heat issues. The stand is low profile and provides just enough clearance to keep the laptop from heating up from the dock while not adding too…
This print is suitable for Xiaomi Deerma DEM-LD220 for lifting it up from the ground for approx 20cm. Use adaptive triangle infill for less material use
STL FILE Made it in 3 hour just wanted to have a good cupholder it is 90x90 wide and a 65mm distance from the window TRIM I think it will fit well and be pretty functional also good to place Velcro on the backside to make it very sturdy.
Customized version of https://www.thingiverse.com/thing:1038261 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1038261 Instructions Using the following options: wholeMessage = und/ zScale = 35 xTranslate…
Kobe Red Line GD2206L toolbox organiser space for 5x2mm magnets in bottom to secure inside metal toolbox No supports needed
This is an update to the original model. My Dell Precision laptop from work would not fit in the slot meant for the laptop. It was too thick. So, I expanded that slot by 10mm to allow for larger laptops to work in this stand. It works…
I made a replacement protective cover for the 3LD2203-0TK53 SENTRON. For my use case, both PETG and PLA with standard settigns worked fine.
Codo D22 para utilizar en caños eléctricos de PVC D22 para el guiado de cables por fuera de la pared. Si lo utilizas para cables con tensión eléctrica domiciliaria, deberías utilizar un material ignífugo (por ejemplo PA2210 FR, en mi caso…
I did not have the right bolts on hand to use Ascardia's method, but I did have an abundance of M3 bolts and nuts. This is designed to bolt onto Ascardia's option 2 version. I have used Ascardia's version multiple times in the past, but…
This is a very simple little repair part. I modeled it off of the broken part (lots of measuring with calipers plus a decent amount of print-try-reprint). No AI used in any way for this model. I can't say that it'll last forever, but…
Replacement clip for the centre console/storage compartment, originally designed for a 2011 Nissan Navara D22. This part should also fit other D22 models across similar years, as the interior design remained largely unchanged. The design…
Custom pillar gauge pod holder designed to suit standard SAAS gauges. This model is available in multiple configurations so you can choose what fits your setup. You can print: Single pod Dual pod Triple pod Each pod can be printed…
My porch light sconces shine directly into the lens, which was never an issue with my old Nest doorbell, but the D225's 180-degree wide-angle lens made the glare a real problem. This cover is a pressure fit, so just push it on! Print…
I designed this to mount the doorbell to the front of my house which has 4.5" vinyl siding. I didn't need any extra screws; just used the hardware that came with the kit! Printed on an MK4S in PETG: Printed on its side with organic…
Mount the Boavision 360º security camera that requires a vertical wall at the corner of the house under the soffit. It creates a vertical mount plate for the camera that is 45º from either wall and bolts into the frieze boards on both…
Printed with transparent PLA with 0.3mm layer height Bondhus BD22199
