Liczymy pasujące modele…
Vibration dampers of the legs for kobra 2 neo. When printing, the printer shakes everything around a lot. These dampers reduce the shaking around. Rubber round spacers on the bottom prevent sliding on the table and dampen vibration even…
This feeds fits perfect for Anti Vibration dampers for Washing machines or dryers. This can be found on ebay or any other platform for about 6€ The vibratrion is much less than with the original feet. Should fit on any other Bambu Lab…
These come in two varieties: full cover, and a notched one that allows for some light to come from the bottom of the damper. Slotted damper shown in the photo. Infill doesn't matter given the size. Printed as shown in Prusament Galaxy…
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
Super easy print, if your rubber damper for the CSL Elite is broken due to hard use. Change the infill to increase or reduce stiffness, I like it at 50%, I found 25% is too soft for me but that is my personal preference. Print settings:…
Works for Ender 3, Ender 3 pro and other printers that uses 40mm aluminium extrusions on the bottom. I have designed Ender 3 anti vibration feets with stock bed springs. But it's a bit too wobbly so I decided to use Ender bed silicone…
Works for Ender 3, Ender 3 pro and other that uses 40mm aluminium extrusions. I was searching for the best looking and working ender 3 anti vibration feets. I haven't found what I would like so I decided to design my own feets. Everything…
This model is designed to be printed laying sideways. Use supports for the CV inner race slots. Do not use 100% infill as it will be too stiff and ruin the rest of the drivetrain.
The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…
Remix of the CR-10 Vibration Dampers with a smaller diameter of 23mm, matching the rubber feet of the JGAurora A5. Tolerances allow for easy assembling. These PLA vibration dampers help to significantly reduce printer noise, and in my…
Simple mold to make silicone dampers for your heatbed instead of springs. I did use 2 component duplicate silicone (200°C safe), which did get off the mold really easy. 2 versions. One with printed pillars for the holes and one with holes…
UPDATE: A new improved model can be downloaded from here . Something that was longtime postponed - Vibration dampers. If you want a really quiet printer, you can use these great looking vibration absorbers based on squash balls (two…
Anti-vibration legs - TPU dampers, for make less noise. If you put file to slicer and check out, you will see inner body and halo structure Im include STEP file to easy edit, if need as well, becomes need test. Print settings for 0.4…
Something that was longtime postponed - Vibration dampers. If you want a really quiet printer, you can use these great looking vibration absorbers based on squash balls (two yellow dots). They are very easy to print. Your 3D printer will…
A form to create four silicone dampers for the stock Sidewinder heatbed. The size of the dampers is 20mm height and 23mm diameter. M5 screws are needed as "placeholders" and to connect the two parts together, but... ...Unfortunately,…
Low profile dampening system for your shaky 3d printer. Prusa I3 mk3 is quite a printer on its own, but it can transfer vibration into your desk making it a speaker. As a result, the printer can appear as a very noisy machine. This…
10% Infill -w- 3D Honeycomb Fill Pattern + 2 Perimeters ~28 min. on the MK4 -w- .3mm layers
Exceptionally quiet vibrations and resonance dampers. No more grinding, squeaky, creaking and rattling sounds. They doesn't fall if you decide to move your 3D printer. Low profile, great look. Use two yellow dots squash balls. There is…
Great design, loved it when first saw. May work all 4040 profiles, but Cr-6 has some obstacles at rear right side. So i remixed Foot-3-RR part for my printer. Print Settings: 0.2 layer height %15 infill (rectilinear) 3 walls 4 top/bottom…
Die Schockabsorber Füße wurden entwickelt, um die Leistung und Qualität Ihrer 3D-Druckumgebung zu verbessern, indem sie Vibrationen, Geräusche und unerwünschte Bewegungen minimieren. Diese hochwertigen Füße sind speziell für die…
A little help to get your heat bed higher.
I recently had to move my printer to another location in the house and my new work surface was more of a sounding board than a work surface. I decided to design newer antivibration feet for my I3MK3 to try and reduce the noise level when…
Ive designed this vibration dampers for Prusa Core One Feet from David Warboss ( https://www.printables.com/@DavidWarboss ). Here you can find the the feets from David Warboss: https://www.printables.com/model/1104042-prusa-core-one-feet…
Nerf Motor Spacers/Dampers (vibration reduction) Print with TPE or TPU similar to https://outofdarts.com/collections/motors-2019/products/silicone-motor-spacers-dampers-vibration-reduction Category: 3D Printing
UK: Google Translate Feet Vibration dampers for Prusa 3D Printer I have made a "sandwich" construction with the rubber material "Spectrum 90A S-Flex" and the plastic material "PETG Prusament" to improve vibration damping. I think it has…
I made these dampers for the Philips EP2220 espresso machine. I did not like the look of other models on this platform. They mute the vibrations of the machine to the worktop. I have a wooden worktop and it helps a lot. The dampers might…
This model was designed to raise the Unimat SL1000 2.5" off of my table using the holes and cast base given. I used long M3 bolts to clamp to my table. Printed in Nylon for strength and to dampen any vibrations. 20% infill or more works…
You will need a magnet 40x10x7 (6x) - holding force approx. 9kg. 6x screw (worm or threaded rod) 3x25, threaded insert M3x5,6mm
These silicone dampers are supposed to replace the weak springs underneath the heatbed. Makes the printing bed much more stable. Additional parts needed: 4 Bolts M3 x 30 mm, 4 Nuts M3, 4 Washers Category: 3D Printing
Simple feet for lack tables, using a press-fit solution for typical washing machine dampers. I got my rubber dampers from AliExpress.
Zum deutschen Originaltext geht's weiter unten ------------------------------------------------------------ I designed these vibration dampers because my IKEA Lack shelf moved quite a lot during my prints, despite having a concrete slab…
Dies ist eine Gießform für runde Dämpfer mit 22mm x 15mm und 4mm Loch. Diese können bei sehr vielen Druckern unter dem Heizbett als Ersatz für die federn genutzt werden. Dies erspart Euch ständiges nachjustieren durch den Verschleiß der…
I remix the excellent MK2 dumpers (https://www.thingiverse.com/thing:2458294) to be suitable for MK3 or any printers with fix like T nuts. just put inside and do a 1/4 rotation. I put it on my MK3 and sometime I ask me if the printer is…
Um die Lautstärke meines X5S zu reduzieren habe ich Stoßabsorber für die Nema Motoren verbaut. https://www.amazon.de/gp/product/B01MDMR9X5/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 Ich muss sagen, das war ein voller Erfolg, er läuft…
Dies ist eine Gießform für runde Dämpfer mit 22mm x 15mm und 4mm Loch. Diese können bei sehr vielen Druckern unter dem Heizbett als Ersatz für die federn genutzt werden. Dies erspart Euch ständiges nachjustieren durch den Verschleiß der…
TPU 100% INFILL
The Beta 95X from BetaFpv is a nice little whoop with DJI's digital video system using Caddx Vista. However, BetaFpv failed both with delivering an acceptable canopy and providing jello-free video. A better canopy design is already…
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
You can make Craftbot a lot quieter by installing dampers on stepper motors and putting it on flexible legs. Here are two simple designs, you will be surprised by the results :) Instructions The stepper motor dampers are simple flexible…
5x threaded insert M3x5,7mm and 5x screws M3x13mm
Place the spacer in between the stepper motor and the damper. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.08 Infill: 100% Filament: Anycubic PLA black Category: 3D Printer Accessories
This spacer is designed for silicone bed damper mounts on the Voron V0.1 and V0.2 heated bed. In some setups the adjustment range of the bed screws is limited or the heated bed sits slightly too low. These spacers raise the silicone…
This 3D-printed model provides replacement motor supports for a Singer Futura 1000 sewing machine. It’s designed to replace the original small rubber dampening blocks (silent blocks) to help reduce vibration. Recommended material: print…
Door dampers to put into the door frame tiny holes (5mm). You can put them in a feel a nice click when they pop in. Because of the design they are hard to remove, probably use some pliers. Can be printed with TPU 95 without supports. I…
Gator Clamp - TPU Jaw Dampers A simple addition to the Gator Clamp - Better Better Mechanics . These flexible TPU pads are designed for the upper and lower jaws of the Gator Clamp, providing better grip while protecting clamped surfaces…
This spacer is designed for silicone bed damper mounts on the Voron V0.1 and V0.2 heated bed. In some setups the adjustment range of the bed screws is limited or the heated bed sits slightly too low. These spacers raise the silicone…
The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…
These dampers are specifically designed for IKEA Lack tables and should be printed in TPU to function properly. During fast 3D printing, the Lack table may move and produce disturbing noises. The vibration dampers are attached to the…
Rubber damper printed in tpe 82; pin printed in pla+. The shape copy the original damper of my swinging garage door. This kind of tpe is simple to print and very useful for this kind of applications.
These are Damers for you hdd case from the fractal north computer case fitting into this original model Model here https://www.printables.com/model/1542671-fractal-designs-pop-series-hdd- ). Print with ninjaflex tpu. You can print it…
print in TPU 95A or softer, infill 15% print two instances. The washer is for the rear of the motor, the two others parts for front of motor, damper is in half.
After printing and using 3Dworkshop's vibration dampers ( https://www.thingiverse.com/thing:2557700 ) for a while, I realised that the PLA I used was so stiff that it wasn't really doing anything much. Hence I decided to design my own…
Spikes for acustik dampers for gluing or taping to the wall, fits 19mm VHB great. 30mm long spikes, worked great for my panels.
