Liczymy pasujące modele…
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
Wydruk około 9,84 €–12,02 € nettoWstępna wycena jednego wariantu
Constructed using https://www.printables.com/model/916851-denali-screwdriver-holder-hsw model of the screw driver and the footprint of the bitholders and extension. Used gridfinity refined for the base. Changelog: v1 → v2: Added tolerance…
Ikea Skadis - Amazon Basics (Denali) Screwdriver Holder
The little clamp on my passenger side mirror cover broke, a replacement visor is $200, so I took some time, and designed this, printed out of ABS and it works. You need to add some conductive tape to the tab in the middle (see the factory…
This mount is for an Amazon Basics/Denali electric screwdriver. There's another model on this site that uses a similar mounting style but that one grabbed onto the screwdriver grip, which was scratching my grip and I felt like it would…
A simple wall mount for Amazon Basics screwdrivers. Holds the driver firmly. Print vertically for highest strength on clasp. Would suggest PETG and support for roof of bit block cavity.
I combined the thoughtfully designed Amazon Basics/Denali Electric Screwdriver Wall Mount by @yipottery_2481232 and the ingenious Sy's Peglock - Locking Pegboard System by @StellasFun to arrive at a pegboard mounted holder for the Amazon…
Part of my National Parks Series of Lithophanes which I will be designing more of as time progresses. I will be donating 50% of the net tips, for this design, to The National Park Foundation (NPF). This lithophane simply slips onto a…
Denali bar mount for floodlights or spot lights. Save 100 bucks by printing it. Printed in Pc-Carbon you'll need: 4 x M4 inserts 4x M4 *25mm allen bolts 1x M6 allen bolt + nut PS: I printed a 0.5mm rectangle from TPU to install under the…
I've designed this mount to be able to mount two Denali D7 Pro lights (900gr/2lbs per light) to the crashbar of my KTM. I've printed it with PET-CF (note: NOT PETG) and in quite strong settings: 5 walls, top and bottom 50% infill gyroid…
Se trata de un caja de almacenamiento para el destornillador electrico de DENALI Amazon de 4v, asi como un organizador de puntas de 4mm, son necesarios imanes de 10x5x2mm para mantener las puntas en su lugar, espero les sirva
A stand for the Amazon basics rechargeable battery screw driver for your desk/workbench (loose fit).
Laser 3d scan of the tool, 3d holder created in 3ds max, then exported to STL. Printed at 15% infill with 4 walls/perimeters. I just used PETG, i'm sure pla or asa would work identically.
Resized to fit Amazon Basics / Denali Electric Screwdriver.
Bed Rail Stake Pocket Covers for GMC Sierra EV Denali. Recessed print. Use petg or better.
This is a remix of another design for a non-latching case for the Amazon Basics/Denbali Electric screwdriver and Parametric Latching Rugged Case design. I don't have access to Fusion 360 so I had to manually cut and splice the rugged case…
The little clamp on my passenger side mirror cover broke, a replacement visor is $200, so I took some time, and designed this, printed out of ABS and it works. You need to add some conductive tape to the tab in the middle (see the factory…
Created this for a friend of mine who wanted a kind of replica of his current truck. This is my first attempt at making a model from scratch. It turned out great. Supports may be needed for the side mirrors on the truck body depending on…
3D Topographic Map of Denali (Mount McKinley) Alaska. A rendering of the "Great One", the highest peak in North America. 20,310 feet / 6,155 meters high. When measured from its base to summit; Denali is taller than Mount Everest.
This is a single frame for the Gamma Denali outlet. Nice if you want to swap colors or the single frame just isn't in stock at your local hardware store. Probably works on other euro outlets as well, inside measurements of the frame where…
TinyMtn Free Pack 4 - Alaska This is a package with 3D model files for four notable mountains in the state of Alaska, USA. Denali, 20,310 ft / 6190 m Mt. Blackburn, 16,390 feet, 4996 m Mt. Foraker, 17,400 ft / 5304 m Mt. Deborah, 12,339…
This is a Ikea Skadis mount for a Denali Screwdriver (https://www.amazon.com/gp/product/B09PFCX8Q1/) which is actually one of my most used tools on my workbench. The mount uses the T-nut system…
Just a simple clip to hold the Denali Electric Screwdriver that fits into the Snap connector for the Multiboard.
Denali Electric Screwdriver Holder for use with harbor freight rare earth magnets, 8mm x 3.175mm hole.
Terrain cutout represents an 8km square centered on the peak. Vertical scaling is approximately accurate. Created using elevation data from terrain.party. Model created with HGT2STL and cleaned up with Blender. Easy to print and fun to…
Having recently picked up a new Denali, I searched for some STL's to print for my toolbox showing off how proud I am for these new wheels. I saw a few that were great but thought I'd make my own. This is a three color print, using black,…
This is a slight modification of https://www.printables.com/model/689528-denali-screwdriver-skadis-mount for HSW
I wanted a holder for the screwdriver where I could still plug it in while it was stored. I added a bunch of ¼" drive bit holders for additional organization of bits I wanted to keep close and handy.
Simple wall mount and french cleat hanger for the Flex SD 5-300 4.0 * or the similar Denali Akku Stick screwdriver. For assembly of the french cleat holder an M4 screw and nut are required. But therefore, printing doesn't need any…
Changing mount of the Denali Screwdriver Holder from Chris3DPrints to the HSW system
I use some precision bits w/ this with the use of an adapter (https://www.amazon.com/dp/B0CKSJMB6T?psc=1&ref=ppx_yo2ov_dt_b_product_details) Works good with small screws, A little overpowered but I'm careful.
