P
PrintablesLadyTriDi
NanoDeo - Small Deodorant Container
This compact deodorant container is designed for convenience and portability. Perfect for fitting into small spaces like pockets, purses, or travel kits.
- Pobrania
- 366
- Polubienia
- 40
- Ocena
- 4,75
Wyniki wyszukiwania: deodora
Liczymy pasujące modele…
P
Printablesfolkommen
Wild Deodorant - Refill cup and holder
Print out of heat resistent and foodsafe material if you use hot ingredients.
- Pobrania
- 310
- Polubienia
- 16
- Ocena
- 5
P
PrintablesTaco
Nivea Deodorant stand
Inspired by another Deo holder I made my own version. Fits Nivea 39mm. MY TEST PRINT WAS MADE AT 101% ALL AXIS. I included a small hole that almost goes through the entire base if somebody maybe want to weight it down with a small metal…
- Pobrania
- 291
- Polubienia
- 28
- Ocena
- 4,83
P
Printablesmark
Gridfinity Deodorant Holder
2 x 1 gridfinity holder for deodorant, accomadating up to a 67 mm width. Remix of @Dominate4life model adding bevled edges. Printed .20 layer heigh with 8% infill.
- Pobrania
- 213
- Polubienia
- 35
- Ocena
- 0
P
Printablescarlascreashuns
Deodorant Roll Stick
This design is based on a chapstick tube, but in XXL scale, that could be used for deodorant. In order for the screw to hold I inserted a very slender knitting needle for strength.
- Pobrania
- 195
- Polubienia
- 15
- Ocena
- 0
P
PrintablesGunner A
Gridfinity deodorant holder
Holds a normal stick of deodorant in a 1x2 gridfinity form factor. The hole is 31mm x 65.5mm, a cylinder is cut out down the middle that's 16mm in diameter
- Pobrania
- 174
- Polubienia
- 30
- Ocena
- 5
P
Printablesohuf
Deodorant Roll-On Upside-Down Stand (original design)
(Deutscher Text: Siehe unten...) Do you know those deodorant bottles with a spherical cap? They are a perfect example for form not following function! Having them upright is a terrible waste of time in the morning, especially when they're…
- Pobrania
- 158
- Polubienia
- 21
- Ocena
- 5
P
Printablesavierich
Gridfinity Deodorant Bin
Gridfinity bin to hold a deodorant stick. The bin occupies 2x4 grids, and is 2 units tall.
- Pobrania
- 143
- Polubienia
- 38
- Ocena
- 5
P
Printablesminiluv
Nivea Deodorant Holder
Ever had your Nivea deodorant dry out, keep it inverted in these stylish holders.
- Pobrania
- 133
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMichael T
Wild Deodorant Refill Case V1 - 3 Refills
A small case with a lid that holds up to three refills of Wild deodorant.
- Pobrania
- 121
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDominate4life
Gridfinity Deodorant Stand - Simple
Gridfinity Deodorant Stand - Simple
- Pobrania
- 117
- Polubienia
- 17
- Ocena
- 5
P
Printablesmcberry23
Deodorant Gridfinity Bin
A gridfinity bin to hold deodorant in an efficient upright position. Dimensions of main slot: 30mm x 155mm Configuration: 1U x 3U base, 6U tall Bin based on Gridfinity by Zack Freedman and designed with Fusion 360's GridfinityGenerator .
- Pobrania
- 112
- Polubienia
- 9
- Ocena
- 5
P
Printablestimbleman
Nivea deodorant holder
The cap design of Niveao deodorant roll-ons does not allow the roller to be placed upside down. Using this simple holder, you can flip the deodorant and get every last drop out. This print does not have any strong loads or high…
- Pobrania
- 108
- Polubienia
- 9
- Ocena
- 5
P
PrintablesJJEM
Fussy Deodorant Holder
I find the Fussy deodorants fall over very easily so I made a mount for them, there's versions for one or for two. I printed mine with no base and sparse infill so I could fill it with cement afterwards to weight it down, but it will…
- Pobrania
- 97
- Polubienia
- 4
- Ocena
- 5
P
Printablesphi.gl
Upside-down stand for roll-on deodorant
Elegant and practical upside-down stand for roll-on deodorant. Useful for getting even the last drop out of the bottle. Designed to be robust enough to achieve great stability, so that it can be used without any gluing.
- Pobrania
- 97
- Polubienia
- 13
- Ocena
- 5
P
Printablesohuf
Purist Cubic Upside-Down Stand for Deodorant Roll-On Bottle (original design)
(Deutscher Text: Siehe unten...) Do you know those deodorant bottles with a spherical cap? They are a perfect example for form not following function! Having them upright is a terrible waste of time in the morning, especially when they're…
- Pobrania
- 84
- Polubienia
- 10
- Ocena
- 5
P
PrintablesBarsMonster
Deodorant Holder / Stand
Holding it upside down. No supports needed for printing.
- Pobrania
- 82
- Polubienia
- 14
- Ocena
- 5
P
PrintablesSven
Stand for RollOn Deodorants
Stand for RollOn Deodorants Fixes the problem of the deodorant sitting in the bottom of the container if its near empty, preventing you from using the entire deodorant. Easy to print without supports. Good for Deodorants of 42mm diameter…
- Pobrania
- 79
- Polubienia
- 5
- Ocena
- 5
P
PrintablesJP3D
Deodorant Holder
Deodorant sticks are frustrating when they are nearly empty. This print holds round deo sticks upside down, so they can be used instantly. Brands like Nivea, 8x4, Fa, Balea and many others will fit. No supports needed.
- Pobrania
- 77
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDman79
Deodorant Holder/Mount
This model is measured to fit the standard Old Spice deodorant however it can be scaled to fit other kinds as well. The print call be wall mounted with 3m adhesive or other double sided tape (you could also drill holes in it to mount with…
- Pobrania
- 73
- Polubienia
- 12
- Ocena
- 0
P
PrintablesIwan
Nivea Roller Deodorant Upside Down Stand
wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…
- Pobrania
- 72
- Polubienia
- 11
- Ocena
- 5
P
Printablesohuf
Customizable Deodorant Upside-Down Stand (original design)
(Deutscher Text: Siehe unten...) Do you know those deodorant bottles with a spherical cap? They are a perfect example for form not following function! Having them upright is a terrible waste of time in the morning, especially when they're…
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 5
P
Printablesrouvenschandl
Gridfinity Deodorant Holder
A Gridfinity 2x6 Plate for Holding 3x Deodorants / Similar Sized objects
- Pobrania
- 63
- Polubienia
- 14
- Ocena
- 0
P
PrintablesThomas
Deo-Roller Halter - German Deodorant Roller Holder
Wir präsentieren den Deo-Roller Halter, ein einfaches, dennoch funktionales 3D-Modell, das speziell für typisch deutsche Deo-Roller entworfen wurde. Es sorgt dafür, dass Ihr Deodorant aufrecht steht, Lecks verhindert und jederzeit leicht…
- Pobrania
- 61
- Polubienia
- 5
- Ocena
- 5
P
PrintablesJannik
Wild Deodorant "Last Bit" Adapter / Extender
Do you know the problem? Your Wild Deodorant refill is almost empty, but there’s still a significant amount of product stuck in the cardboard cartridge that the original mechanism can’t reach. This 3D-printable adapter is designed to sit…
- Pobrania
- 60
- Polubienia
- 4
- Ocena
- 0
P
PrintablesWies Vanhentenrijk
axe deodorant holder
printed lying flat on its back
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 0
P
Printablespre10c
nivea deodorant stand
fast and easy print to place your nivea deodorant upside down, so the ball stays moist
- Pobrania
- 54
- Polubienia
- 12
- Ocena
- 5
P
Printablesbcrittenden
Gridfinity Deodorant Bin
Gridfinity bin or deodorant. Printed on a Bambu Labs X1C using Bambu PLA Matte Terracotta and the standard Bambu 0.20 Standard print profile.
- Pobrania
- 53
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCouchPrinter
deodorant deoroller upside down
Inspired by this (see original), I created this model. It always annoyed me when the deodorant roller was empty until the rest was at the front of the ball. Filament: PLA Slicer : BambuStudio Profil : 0,20 standard Walls: 3 upper layer :…
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 0
P
Printablesglezmen
Wall mounted deodorant / can holder
Lightweight wall mountable deodorant holder for 4 cans. Based on the parametric tube holder .
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLK 3D-Prints
Nachfüllbarer Deoroller / refillable deodorant roll-on
Nachfüllbarer Deoroller Deoroller wird aus 4 Einzelteilen zusammengesetzt. Innenteil wird durch eine Gewinde nach oben und unten bewegt. Deckel und Grundkörper haben ein Gewinde um den Roller verschließen zu können. Deckel und Unterteil…
- Pobrania
- 46
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFaceHaver
Deodorant Can Prop Silencer Adaptor - 14mm CCW / 1/2-20 UNF thread
Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While an average aerosol can…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAA
Old Spice Deodorant Storage HSW
Old Spice Deodorant Storage for Honeycomb Storage Wall
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 5
P
Printablesubex
L'Oreal Men Expert Deodorant - upside-down-stand
I have created an upside-down-stand for my L'Oreal Men Expert roll-on deodorants. The cap is round and without this stand, 20% deo remains in the roller and are thrown in the garbage. Print time is around 1h and there is nothing special…
- Pobrania
- 43
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAndyS
Fussy single deodorant stand
This is a stand for a single Fussy style deodorant case. Minimal on-bed supports and a brim advised. Prints great with PLA, and PLA CF.
- Pobrania
- 42
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCarlos Morales
Nivea deodorant lid
A simple replacement lid for Nivea deodorants so that the container can be turned upside down and emptied completely. Made by [email protected]
- Pobrania
- 42
- Polubienia
- 8
- Ocena
- 5
P
PrintablesZF Designs
Deodorant Rack
A rack that can hold 2 Deodorants and has 2 hooks for your shirts. It also has a replaceable name plate so you can print multiple for different people and label them.
- Pobrania
- 41
- Polubienia
- 17
- Ocena
- 4
P
PrintablesSoupCake
Nivea Deodorant lid (chamfer)
The lid won't stop the deodorant from oozing, if there is too much still in the bottle. Don't turn upside down before it's almost empty Remix of Carlos Morales design ( here ) with a small chamfer on the top face to break the sharp egde.…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 4,67
P
Printablesinnercube
Upside down Deodorant roller holder for complete emptying
I use deodorant roller from Nivea. So that I can empty them completely, they must be upside down. This holder makes it possible.
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesReypatey
L'Oreal Men Expert Deodorant round upside down stand
Printed with 10% infill though you might get away with even less. Might be scalable for different kinds of roll-on types. The round part measures 50.5mm.
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 4
P
PrintablesBrian DMG
Gridfinity deodorant holder x2 (2x2x4)
A Gridfinity deodorant bin that holds 2 sticks of stick deodorant (2x2x4). Will probably work for just about any stick deodorant/antiperspirant in this form factor. Print with your material of choice, no supports needed, don't use a brim…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 4
P
PrintablesChristian K
Roll-On Deodorant Holder / Stand
This is a stand/holder for a roll-on deodorant. I designet this because someone in my family was tired of it not being able to stand on it's top, and there would therefore not be any deodorant at the ball/tip. This way the deodorant can…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBlake Mitchell
wild deodorant gridfinity base
this is an organizer tray for the wild deodorant aluminum case and 4 refill packs. for gridfinity users, this takes up 4x4 on a grid. i found the gridfinity system nice for bathroom drawers so i can easily organize, yet still have the…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFlo
Upside down holder for Nivea Deodorant
Nivea decided to make the caps of their deodorant bottles round so you can't store it upside down. This means that getting the last bit of liquid out of it is impossible because it will never collect at the top. To fix this, I have…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 5
P
PrintablesMichael T
Wild Deodorant Case V2 - 2 Refills
I created this case for my Wild deodorant refills. It's compact, uses less material than V1, has a tight closing lid and fits 2 refills. It mirrors the design of Wild's new deodorant cases which have rounded corners. Printed this using a…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJP3D
Deodorant Holder Honeycomb
Deodorant sticks/rollers are frustrating when they are nearly empty. This print holds round deo sticks upside down, so they can be used instantly and even when nearly empty. Brands like Nivea, 8x4, Fa, Balea and many others will fit.…
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 0
P
Printablesdhiertz
stand for roll-on deodorant
layer 0,2mm 10% infill 4 top and bottom layers 2 perimeters I printed it with Kingshark PLA Blue filament.
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 4,5
P
PrintablesJC
NATIVE Deodorant Holder
NATIVE Deodorant Holder When you want to store your deodorant but also have other scents, or extras. When I order from Amazon, I always auto-ship 3. I also added another model file and print file that holds just 2 instead of the original…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesS-T-O-N-E
Roll-on deodorant holder
Simple roll-on deodorant holder for two roll-on deodorants. I stuck the holder in my bathroom cabinet with double-sided tape. The opening diameter is 38mm. Simply scale the holder in the slicer if your deodorant are larger or smaller.…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 5
P
PrintablesGxrkensalat
Deodorant/Razor Holder
Deodorant and Razor Holder You need M4 screws Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.28 mm Infill: 15 % Filament: Polymaker Polylite PLA White Category: Bathroom
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMat
2x Deodorant and TePe brush holder for #Gridfinity
If you haven't #Gridfinitised your Personal Hygiene yet, then WHERE HAVE YOU BEEN? This holds your deodorant (e.g. Sanex or similar size - 46mm) at a nice slanty angle so it looks a bit sexier. Well, as sexy as deodorant in your bedside…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesnikS
Decorative Deodorant Holder spiral - Hidro Fugal
Holds your deodorant upside down so it doesn’t dry out and the rest can be easily used. Optimised for the Hidro Fugal Deodorant with an diameter of 42mm If there is a different size needed, just let me know the diameter and I will add it…
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesThomas
DeodorantStand
It always bothered me that the last bit remained at the bottom of the jar and I had to turn it upside down for a while to use it again. I designed this simple but effective stand for the deodorant so that it can be used at any time and at…
- Pobrania
- 28
- Polubienia
- 10
- Ocena
- 5
P
Printablesmadcap
Deodorant Upside Down Holder
Edit : Funny thing that I only thought to search for this after I published, and there are oodles of them! Oh well - hope someone enjoys it :) I needed a gadget to hold my roll on deodorant bottle upside down. When the bottle is getting…
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDon Pinpon
Yet another Nivea deodorant holder
Another Nivea deodorant holder, this one lets you place the deodorant in two positions, up or down. Also knurled texture
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBenedict Balzer
Deodorant Holder (Nivea 39mm)
Holder for Nivea Deodorant rollers (for Nivea 39mm diameter bottles). No need for supports.
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 5
P
PrintablesTechSensor
Gridfinity Holder for Deodorant Roller or Spray
The holder has 4 gaps to allow water to flow out of the model. There is also an icon on the floor of the model of a deodorant roller.
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJacob Tepperman
Gridfinity 2x deodorant holder
Holds 2 sticks of deodorant on its side. fitted to reduce wobble and still allow for easy access. Modeled after old spice deodorant.
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMark
Irish Spring Deodorant Stand
When the deodorant gets low it gets top heavy and easily falls over. I made this so it has more stability.
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMax
Deodorant Holder (Old Spice)
This is a Deodorant Holder I made for my locker. It can hold the new design of the Old Spice cans. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0,2 Infill: 50% or more Notes: 50% infill for PLA…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
Printablesst3ddd
Hidro Fugal deodorant roller top down stand
Two options of a simple stand for Hidro Fugal deodoarant roller. Motivation: usually some deodorant is wasted as it gathers at the bottom when standing on the rollers base. By flipping the roller upside down, all of the deodorant can be…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesErlend
deodorant potty
The hole is 50 mm overall is about 70mm x 84mm, 54 high.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBrounch
Upside down deodorant roll-on holder
When the roll-on is almost empty, the liquid stagnates at the bottom and the ball dries out.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOnza
Krabička na voňavky a deodoranty.
Krabička na voňavky a deodoranty.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDan
IKEA Dynan Bottle Deodorant hair spray mount
IKEA Dynan shelf does not offer much but I like the simplicity but I do not like bottle falling over while dusting the shelf every week or so. SO I designed that clip bottle mount with an opening of 49,8mm in diameter
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
Printablescsthomas84
Deodorant holder (for Speed Stick brand)
A holder to keep Speed Stick brand deodorant from tipping over. Default print settings work fine! Cut in half and use connectors for printing without supports.
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRaxuk
Deodorant and bathroom vanity holder
Deodorant, floss, nail clipper and tweezers holder Can be taped to the wall. Made in tinkercad. 126x50x52mm
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
Printableswenjuk
Stand for roll-on deodorants
Stand for roll-on deodorants to use them right up to the last.
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 5
P
PrintablesStelzenbach
Deodorant Holder 40mm
Printed in PLA with variable layer height. Happy Printing!
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStephan
Nivea Deodorant Stand Castle
Ständer für Nivea Deo in der Form eines Burgturms mit Fenstern und Zinnen. Ich habe für den Druck PLA verwendet.
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 5
P
Printablesbolens
Nivea Deodorant Stand
This stand is used to keep your Nivea Deodorant upside down so it is always primed for use or for when it gets low to get as much out as possible.
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWibbit
Crystal Deodorant Holder — Replacement Base + Screw-On Lid
Why? If the plastic base on your crystal deodorant has cracked, this is a sturdy PLA replacement rather than buying a whole new product. The crystal lasts for years — the holder should too. Features Screw-thread lid — 1.5-turn thread…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndyS
Triple Fussy deodorant stand
This is a stand for three Fussy style deodorant cases. Prints greal in PLA and PLA CF, no supports required, but a brim is advised for bed adhesion.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarley Fairlamb
Nivea Deodorant Holder
This will hold your Nivea roll-on deodorants perfectly, while it also gives you a satisfying click when you put it in and take it out. Supports %20 infill
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKorbi Muster
Deodorant Tilter / Inverter
This is a simple holder for a roll-on antitranspirant (e.g. from Nivea). The holder allows to put the deodorant upside down to use the last drops when the container gets empty. Please consider a small contribution to my Paypal. It would…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesOkayeg
Deodorant holder
Designed this in a rush to organize my spare deodorants in bathroom shelf. Works well with any deodorant with standard diameter of 45mm. Feel free to put some more thought into it. Printed in PLA, 20% infil for rigidity.
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPapy_cipy
Deodorant rack
Yet another thing that's dumb but helpful :))
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThomas
Deodorant roll-on stand
Kind of silly this one… it just bugged me that the deodorant roll-ons I use the most have a round top. It's always a hassle to get out the last bits because you cannot store them upside-down. Well, that's is all this thing does. The inner…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 4
P
PrintablesWilliam Patrick
multiboard deodorant holder
I designed this for my multiboard i installed in my bathroom.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCodex Fons
Minimalistic stand for Nivea roll-on deodorant
Nivea wants you to buy more deodorant, so they design the roll-on bottles with a round cap, so you can't store them upside down to make sure that every last bit of deodorant is used. This makes sure that you can get every little bit out…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 5
P
PrintablesF@stH@w|<97
Old Spice Deodorant Stand Holder
I was getting annoyed at how often my Old Spice deodorant would tip over, so I designed a stand with a wide base to keep it upright. The fit is snug enough that it won’t fall out easily, but you can still remove it when the deodorant runs…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printableschking
Multiboard Deodorant Holder
Designed to mount the Gillette Advanced Clear Gel Antiperspirant (or other similarly sized objects) to a Multiboard wall. The included support ensures that the holder doesn't slowly work loose. Uses the standard Multiboard Lite Rail Pop-In.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFlo
Upside down holder for Ziaja deodorant
Ziaja decided to make the caps of their deodorant bottles rounded so you can't really store it upside down easily. This means that getting the last bit of liquid out of it is impossible because it will never collect at the top. To fix…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printableskarelk
Deodorant Holder/Mount remix
I really enjoy designing practical wardrobe inserts with my 3D printer. Recently, I was looking for a deodorant holder that could be mounted inside my wardrobe. I found an existing design, but I wasn’t satisfied with the amount of…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSebastian Alexandru
Lancaster deodorant cap
Lancaster deodorant cap, makes it easy to apply the deodorant without having to use other methods, the design comes with a thread to close the container preventing the cream from coming out and it also comes with a protective cap to…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesByrn3D
Disability deodorant handle
I've tested the model and 2 adapters with the following brands and types Adapter V1: Nivea stick, Dove men's stick, Rexona men's stick, Arm and Hammer stick deodorant Adapter V2: Mitchum Gel deodorant (all 96g versions), Speed stick (76g…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSchwarznetzle
Deodorant Holder
Holder for a deodorant, e.g. in a spindt
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBrian Cassidy
Smart Old Spice Deodorant Stand with Aqara Contact Sensor for Usage Tracking & Reminders
This Old Spice deodorant stand is designed to integrate an Aqara Door Window Contact Sensor to track when a deodorant stick is lifted and replaced. By integrating into your smart home system (I recommend Home Assistant) you can monitoring…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
Printablesguyjami
Deodorant Roller Support
You'll find explanations in french on my website : https://labidulerie.vicou.be/support-roller-deodorant/ Support to place the roller upside down. To empty it easily. Made with an ender 3 v2 and ordinary PLA in standard quality…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDarth Ambivalence Revan
Wild Deodorant Roll on Gridfinity
These are files for the wild roll on deodorant case and it's refills
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 5
P
PrintablesGeddysburg
Crystal Mineral Deodorant Stone Grip
If you use a deodorant stone, as they are made out of mineral salts, dropping one by accident will render the stone jagged at best, or completely broken at worst. Since these things are supposed to last 10 years, why not make them easier…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKWE Customs
Deodorant Crank
Accessibility device - hand crank to interface with deodorant advancement wheel. For hard to turn wheels or those with dexterity limitations This was designed with the Old Spice line of deodorants. It may work on other brands. If your…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJohny Chimpo
Dr. Squatch deodorant lid
Print with 2 walls. I printed with fuzzy skin on outside only and use glow in the dark filament. The lid fits real snug.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesByrn3D
Deodorant wall hanger
Printed on Anycubic Kobra S1 in Elegoo rapid white PETG Uses M3X25mm machine screws.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 5
P
Printableschking
Multiboard Deodorant Holder
Designed to mount the Gillette Advanced Clear Gel Antiperspirant (or other similarly sized objects) to a Multiboard wall. The included support ensures that the holder doesn't slowly work loose. Uses the standard Multiboard Lite Rail Pop-In.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDavid Fricks
Gridfinity - MALIN+GOETZ Eucalyptus Deodorant Bin
Just another bin for your bathroom drawer.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablestasos
Wardrobe Deodorant
The model from the photo is a trial model. The model should be easy to print.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTravis McKinstry
Electric toothbrush & deodorant holder
Super easy-to-print part for your honeycomb storage wall. I printed a HSW for my bathroom to save on precious cabinet space. I ended up needing to create & print a toothbrush holder for my electric toothbrush. After printing it with an…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0