Liczymy pasujące modele…
Introduction There are already a lot of adapters for Mirka Deros Sanders . But either they are for the old Deros sanders, didn't fit well, had a weak structure or I just didn't liked them. Therefore, I have created three own adapters with…
Angle guides (90°, 45°, 30°) for Mirka Deros orbital sander. These angle guides for the Mirka Deros orbital sander are a great help when sanding edges and chamfers. I printed the guides out of PLA and I am very happy with them. To…
I wanted to make myself a Wallmount, which works for booth pads (125 and 150mm) for the Mirka Deros (550CV/5650CV. This way I can hang the sander no matter what plate diameter I just put on it. Like it? Please don’t forget a like any…
Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…
I made this insert by scanning the inside of the Systainer. It organizes all the different 150mm sanding papers you might have. There's also some space on the right for some 125mm papers. I printed the Insert from Polymaker PolyLite PETG…
I was looking for an M32 adapter for the Mirka Deros - created from osVAC Neo Male and Mirka Deros Adapter as stated below. Thx for this great open-source vacuum system. Works like a charm and tolerances to the powercord of the sander are…
I was needing a part to connect a vacuum hose to my Mirka DEROS orbital sander to extract dust I designed the part in Fusion 360 with a female connector with internal screw to enter the sander exits and just a simple cone to connect the…
This is a bracket to hang the Mirka Deros on the wall and it's not damaging it's sanding disc. You'll need for example two countersunk wood screws 5 x 70 like this to mount it to a beam: HECO-TOPIX-plus 5,0 x 70, countersunk head,…
Accessories in the box Mirka DEROS Hand sanding block ( https://www.amazon.de/gp/product/B006HHFVCM ) Hand sanding block (120mm x 60mm x 40mm) Hand sanding block (150mm x 7mm rounded;…
¡Libera la furia adorable en tu impresora 3D! Descarga este increíble modelo Chibi de Hulk, listo para mostrar su fuerza en un formato divertido y compacto. ¡Perfecto para fans de Marvel y coleccionistas de Funko! ¡Imprime el poder en…
Was looking around for a way to sand 90° with my Mirka Deros 650CV. Saw an etsy listing for € 20 and decided to design one myself. It can be used with both the 125 and 150mm sanding pad. I've included both the Fusion360 f3d file aswel as…
This is a Festool cleantec adapter for the Mirka Deros sander. Dies ist ein Festool cleantec Adapter für den Mirka Deros Schleifer. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Yes Supports: Yes Resolution: 0.2…
Support pour la ponceuse Mirka Deros. Un remix du support fait par jcjames_13009 mais pour diamètre 150mm seulement. impression sans support.
Print it with PETG or similar and make sure that you use sufficient shells. Supports may help with the internal thread. YMMV. I use this to connect the Deros to my vacuum system (which matches the Festool connectors).
This his a Skadis holder for Abranet Sandpaper. Sandpaper usually use with mirka Deros 150mm. It permit a good holding = 156mm ! The Sandpaper 150 mm are too short for these types of sandpaper. With hex pattern we use less filament 70g…
A Skadis Holder for Mirka Deros machine 150mm for T Clip : https://www.printables.com/fr/model/540362-skadis-t-clip-mini-parametric
This adapter connects Mirka Deros devices to Kärcher Vacuums. I printed it in PA6-GF on a Bambu X1C, both 0.20mm and 0.08mm worked well. I used manual tree supports to support the Kärcher locking holes (see 3mf file).
This is an adapter from a osVAC Neo 25mm male connector to the Mirka DEROS 5650CV electric random orbital sander. ATTENTION: This is for the osVAC 25mm system and not the more common 32mm system. I created this adapter because I wanted to…
Poderosa (super heroína sexy)
Comederos para forrajeo de hormiguero, pero estos siguen la linea de los accesorios Rock Mods de los de Ant Dimension: .- 06/jun/24 agregados dos modelos con las ramas del mod Lianas que facilitan meterlos o sacarlos del forrajeo. La…
CAMLOCK Adapter für Mirka Deros Exzenterschleifer
Mirka Deros systeiner organizer to hold 150 mm and 120 mm sanding papers. With additional prints you can stack more 150 mm holders on top of each other. With magnets inserted and glued to each recessed holes, the holders won't slide…
150mm (6 inch) Mirka DEROS Sander Systainer organizer. Also works for the 125mm (5 inch) DEROS sanders.
Na längerer Suche nach mehr Ordnung im Werkzeugkoffer meines Mirka Deros Schleifer hab ich mich an FreeCad gesetzt und mir ein eigenes Design einfallen lassen. Es ist Modular aufbaubar sodass sich jeder nach seinen Anforderungen…
I designed a simple box to hold up to 5 different types of 125mm Sandpaper for mirka deros. Since I already printed the 150mm Padsorter from this model: https://www.printables.com/model/526658-mirka-deros-150mm-padsammler I designed my…
It might only work with the 35mm hose that is part of the GAS35 kit (Bosch PN: 2608000566), as the inside geometry is kind of important with this design. The inside diameter of the BOSCH C35 connector should be something like 32mm, as…
Designed this holder to fit within my cabinettery. It is 5cm deep and the 150mm sanding disks fit perfectly. Expanded the edge, so therefore, the disks have a better support inside the holder. My printed version hasn't this newly edge.…
Der Adapter wird einfach mit denn Orginalen Festool cleantec adapter ausgetauscht. Die innere Schlauchaufnahme und der Kunststoffring wird weiter verwendet. Print Settings Printer Brand: Anycubic Printer: i3 Mega Rafts: Doesn't Matter…
Adapter for the Mirka Deros for standard vacuum cleaner connection Bosch/Festool
I didn't find any designs that I liked for organizing the 125mm pads for the Mirka Deros systainer. I found most to waste space and not giving easy access to the pads. So I made this modular one instead. I made it in 2 parts so it's…
I really liked the already existing model. Unfortunately my sanding pad tends to be a bit thicker. So I added some clearance and minor improvements to the design (tighter fit on the systainer). In the end I added some tape to the back, so…
ACCESORIO PARA PONER EN UNA ESQUINA DEL COMEDERO MIENTRAS SE HACE UNA PANTALLA CLARA O LIPIEZA DE TANQUE. ASI PUEDES RETIRAR LA LAMINA DE RESINA SIN TENER QUE USAR LA ESPATULA MINIMIZANDO EL CONTANTO CON EL FEP Y AUMENTANDO LA VIDA DEL…
I use this great vacuum connector for my Mirka Deros. Credits to the author @fenrir_492704 and link to his model here: https://www.printables.com/model/777654-mirka-deros-to-vacuum-connector-festool-etc When the vacuum connector is…
Adapter for Mirka Deros to Bosch Click & Clean
Adapter für MIRKA Deros Schleifer auf 48 mm Schlauchanschluss, z. B. von NILFISK Attix Saugern. Adaptor for MIRKA Deros grinders to 48 mm hoses as used e. g. with Nilfisk Attix vacuum cleaners. This model is licensed under CC BY-NC-ND…
"Poderosas" is a program aimed at girls between 7 and 12 years old, in order to increase the number of scientific vocations of women at an early age, through direct contact with the method and innovative practice, stimulating and…
Tapa para el hueco que dejan si quitas un comedero en una jaula de pájaros.
150mm (6 inch) Mirka DEROS Sander Systainer organizer. Also works for the 125mm (5 inch) DEROS sanders.
Adapter for Mirka Deros to Bosch Click & Clean
ACCESORIO PARA PONER EN UNA ESQUINA DEL COMEDERO MIENTRAS SE HACE UNA PANTALLA CLARA O LIPIEZA DE TANQUE. ASI PUEDES RETIRAR LA LAMINA DE RESINA SIN TENER QUE USAR LA ESPATULA MINIMIZANDO EL CONTANTO CON EL FEP Y AUMENTANDO LA VIDA DEL…
