Liczymy pasujące modele…
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Wydruk około 9,43 €–11,53 € nettoWstępna wycena jednego wariantu
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
This is my first attemp in creating life-size weapon.
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Circle jig for DeWalt DCW600 DSW604, which is attached to the original guide of the parallel stop and also uses the original locking screw. It is only necessary to melt the nut M3 to fix the circle axis
A remix of 3D Printing World 's Collapsing Broadsword except I removed the robot logo on the bottom of the broadsword.
I’ve included two different models one that’s split in half (just print 2 and glue) and a whole one for SLA. I printed it at .15 layer hight and 4 perimeters to make sure it was strong enough.
These were the fittings i had laying around but they are quite a bit larger than the standard plastic collet. https://www.aliexpress.com/item/1005002680262764.html
1:1 original model extracted from the game
Update! Through popular demand, I have made some slight modifications to the model to make it printable by X/P/A series of BambuLab printers, and have uploaded the corresponding 3mfs! You should print the original ones if you can, but if…
The Elven Swordswoman: grace and precision, combining elegant….armor? with a relaxed stance. Designed with simpler printing and balance in mind, it is well suited for display or tabletop use. She is balaned to stand without a base, but…
This is my first time ever to design a 3D Printed parts. Hope you'll like it
I don't like this black plastic cube end switch mount, so I designed a new one. Suitable for all Creality V2.0 End limit switches! You can use the original screws for the limit switch. The position of the limit switch is identical to the…
someone on FB asked for a broadsword for a gundam, so here it is, not tested but should work on SLA/DLP/MSLA printers. FDM will not work. Category: Model Robots
This remix was largely inspired by Popandsicle's Master Sword , and it's Remix by KurtGamexp. I loved CarlThePumpkinMan's Model so much I just had to print it, but I wanted to make sure it wouldn't break while I was playing with it. I…
a sword created in similarities to a martial arts weapon using the power of six rings. must be increased in size!!
The XCR3D filament connector used when connecting two filaments is easy to connect very short filaments. However, it is not as easy as you think when connecting slightly longer filaments on spool. So I made a stand to make it easier to…
Designed so all the pieces should fit together snuggly. May have to cut the blade into 2 unless you have a big printer. :)
This is a simple rack design used to hold a Viking-design broadsword (mine is from Kult of Athena, for those curious) horizontally on your wall. You'll need 2x and space them out to balance as needed. The support nook for the scabbard and…
If your slicer says it needs supports, it needs supports (none of the parts seem to be borderline need/dont need) 2x Crossgaurd, and both types of crossgaurd pins, the rest 1x. Assembly is fairly simple with a picture of the sword online,…
A new sword model for the Dummy 13 to wield. Easy to print, easy to attach. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any feedback will be highly…
A lot of work went into this one, but here it is. This is a nearly 1:1 scale Zaros Godsword from RuneScape. The assembled model measures a total length of 5 feet 8 inches and is split into 9 parts. Because the blade and the "core" are…
An saucer for the Soundswitch Control One, so that it is at the absolutely same high as the Denon DJ Prime 4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Red Transmission Distance: 4…
Decorative switch plate for on and off switch. (single) Openscad used for switch-plate Spiro app Used to create design (black background and white pen) Inkscape used to trace bitmap and export as svg Tinkercad to turn svg into 3d stl (…
fairy swordswoman with two swords
A Zamorak Godsword from Runescape 3 Category: Video Games
She was found by a crusade after a long period alone on a dangerous xeno planet. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my 3D…
The model consists of 8 parts 3d printed, and one metal tube, I used a basic conduit tube you can find in home depo. The diameter of the tube is 18mm or 0.7 inch. The tube is 22.8 inches long. The sword itself is 35 inches long
Royal broadsword I made because I wanted to try and make a bigger sword that hopefully didn't need much post-work. Unfortunately it seems that I was wrong and the welding was more visible then I had hoped. But of course one could print it…
a pristine royal broadsword from ToTK
I wanted a large project to test my 3D printer. I decided to try and print a full scale Armadyl Godsword from Runescape 3 as it's very iconic. In the end it ended up about half size (just over 1 metre long) When it was split into 5 parts…
the least useful hylian sword
A Bandos Godsword from Runescape 3 Category: Video Games
My submission for https://www.cityofenschede.com/mijnstad
Here's a single-piece design rack to hang a broadsword vertically on your wall. I used two screws to hang mine and it holds up well as my sword is a well-made, lightweight build. Please check out the dimensions and compare to what you may…
pristine solider's broadsword
A Armadyl Godsword from Runescape 3 Category: Video Games
Modeled the Tree in Blender and the Base in Onshape. Its pretty hard to print because of its complexity and size. Ive attempted to print it several times but wasnt 100% sucessful. I added the tree print file of my attempt. The pictures…
Don't think much people have that hotend but figure I should put it out there, the extruder screw hole no longer fits Sherpa/HGX or sailfin extruders and will only fits the orbiter V2. This is for the 3Dsway's CH-C volcano hotend with…
A remix of Toothbrush Holder by weirdswiss. I have made it more practical for you with a toothbrush squeezer. And you use less filament on this ;)
I purchased this Chimera clone on banggood. It is sold red or blue. The nozzles are 13mm apart, and the PTFE connectors are fairly bigger than average (11.6mm diameter). Category: 3D Printer Parts
3DSWAY Filament Welder Adjustable Stand / Holder This is a custom adjustable stand for the 3DSWAY Filament Welder , designed to make welding filament easier, more comfortable and precise. Instead of holding the welder by hand, you can…
Well so here we have a replacement box for the Wadsworth Ratchet Set Mini Super Deluxe I have for work. I let someone use my toolset and then they came back with the box split apart from each other. After using it broken for a bit, I…
Plate for keyboard switches (Cherry MX) Placa para interruptores de teclado (Cherry MX) Category: Computer
Remix of the X-carriage created by StreetShaker (thingiverse) for the Anet A8 Plus (should work with the A8 as well). It allows the use of the original belt tensioner. You’ll need tree longer screw for the motor/bmg— the ones provided…
The Armrest Tops on my Secretlab Titan 2020 chair have cracked and were due for a replacement. Secretlab's new CloudSwap system is great for different types of armrest tops but they are incompatible with the Titan 2020 chairs. This…
A fun ice scraper, with a sword handle. I made it similar to a snow plough so the ice or snow doesn't go up to your gloves or hands. The photo model is scaled down to 50%
it for outside birdcages that dont have the ablity to hang birdswings so i created my own. it screws on with a 3.5mm x 20 woodsrew with a head of 7mm. screws u can find here…
Riser to lift Vitra DSW and DSR chairs by 10mm. The original screws have to be replaced by longer ones. I used DIN 7985 M6x25mm. PETG, 100% infill (you'll need 6,3g of PETG filament for each riser. For one chair, you need to print four of…
Well, at least I tried to make a broadsword. It's more like a dagger…
Bamboo Cloudswarm Swords Xiaomi TV remote case
A fun ice scraper, with a sword handle. I made it similar to a snow plough so the ice or snow doesn't go up to your gloves or hands. The photo model is scaled down to 50%
Royal broadsword I made because I wanted to try and make a bigger sword that hopefully didn't need much post-work. Unfortunately it seems that I was wrong and the welding was more visible then I had hoped. But of course one could print it…
A basic 3d-model of the Spriggin broadsword used by Kirito from the anime Sword Art Online in the ALO arc this includes a full model and one split into 8 parts for easier printing nad assembly using 6mm rods
This version of the sword has a screw on cap so the blades can be printed separately then inserted or replaced. Supports are not required, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a…
This version of the Broadsword has a screw on pummel so the blades can be printed separately then inserted or replaced. The files for this model have been split into different stl's for multi-color printing with a AMS, IDEX, Tool Changer,…
This updated version of the Broadsword has a screw on pommel so the blades can be printed separately then inserted or replaced. There are three different versions, each has a different guard. Supports are not required, for best results…
This version of the Broadsword has been broken into different parts so they can be printed separately in different colors then glued together. It has a screw on cap so the blades can be printed separately then inserted or replaced.…
Decorative switch plate for on and off switch. (single) Openscad used for switch-plate Spiro app Used to create design (black background and white pen) Inkscape used to trace bitmap and export as svg Tinkercad to turn svg into 3d stl (…
