59 modeli
Update 09/18/2024: See V1.2 for the latest release. Includes original files as well as additional versions: https://www.printables.com/model/1011612 Also see for Carbon Folder mod: https://www.printables.com/model/1011626 Duplex Folding…
Replaces traditional vertical outlet. This is a slight derivative of the work by @Chriswak at https://www.printables.com/model/115385-duplex-outlet-shelf It has fewer holes and a flat top to accommodate larger items.
Large outlet shelf for Duplex outlet. Could hold a phone, digital assistant, or other gadget.
V1.1: Duplex Folding Stock & Brace 2020 Conversion Replace "Arm" piece with 2020 Aluminum extrusion. V1.2: Duplex Folding Stock & Brace Push Release Edition Allow for faster folding to either side/ complete removal of stock arm. Update…
I used the original model done by Seht 13. Find the original site: https://3dwarehouse.sketchup.com/model/5e76fb131fb4b6ae52470de2774d6099/MOTRICE-TGV-DUPLEX. I process the information such wat to be able to print everything on my Prusa…
I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!
I designed this splice box in my free time to help the company I work for to acess fiber optic cables in our building. I designed this custom box, because it had to be placed in a fuse box. Of course you can use it anywhere else. It is a…
Two versions. Assist has higher walls to account for foam vibration isolating pad. R/C car aerial tubes can be used to protect the reciever antennas. Print Settings Printer Brand: MK3 Printer: Prusa i3 Resolution: 0.15 Infill: 100%…
This is a mount for the Eero 6e Pro. I wanted something that I didn't have to drill into my wall, use anchors, etc. I wanted to be able to mount it on the duplex outlet (not decorator style) and utilize it facing down. This made cable…
MMDVM based HAM radio hotspot. See original project description and differences section (below on the page) for this project. Using https://www.pistar.uk/ software. Note - solder JP1 pins on hat together to be able to upgrade hat firmware…
Hier liefere ich euch ein Gehäuse für einen einfachen MMDVM Hotspot auf Basis eines Pi Zero’s in Verbindung mit einem Duplex Modem. Achtung, dieses Gehäuse ist nur kompatibel mit den neueren Modem-Platinen ab Version 1.3, da diese Boards…
Modified Duplex Folder Brace piece to fit the Carbon Folder
Case and lid for the MMDVM_HS_HAT_DUPLEX MMDVM dual/duplex pi hat that doesn't have a USB port on it. Suitable for this specific board: https://www.amazon.com/dp/B0878WF7HW There are two versions of the main part of the box - one has…
Easy print of an outlet face plate with one side GFCI/modern, and the other side Duplex. You can print it face down with no supports.
This little shuttle is designed to hold a duplex LC (or 2x Single). It's an all in one solution to attach them to a rope (6mm standard draw cord) and protect the connectors. Electrical tape should be used (more liberally than in the…
Today’s design continues my ornament series with a new twist — literally! This double spiral ornament features a recessed inner spiral , giving it a sense of depth and perspective that plays beautifully with light and shadow ✨. Printed…
This is a case for a Duplex Ham Radio hotspot. Put the Hotspot hat together with the raspberry pi and then put it in the case. The screws are M2, you will need 6 of them. Category: Electronics
This is a large, two fan, wind spinner. The fans are contra rotating. Each fan consists of 5 sails, individual sails are 100x300mm ovals, 3mm thick. Hubs are 120mm wide, 15mm thick and each consists of two halves. The axle shaft is…
This is a connection plate for fischertechnik construction toy parts.
Tired of loose radio nodes cluttering your desk? This 10-inch server blade cleans up your gear and fits perfectly into the LabRax ecosystem. This is a remix of a very well made 10-inch faceplate by George: I kept the mounting slot for the…
This model is a panel or bulkhead fitting for two anderson 45A powerpole pairs. It is sized to fit in a 33mm hole in an panel up to 12mm thick. A cap is provided for protection when not in use I printed the Body1 part with the shorter…
I used Normal EufyMake (previously AnkerMake) settings for PLA+ and didn't need to make adjustments. Make sure printer's Z gap is dialed in or the surface could get marred. See original for details:…
What is it? Example of a standard duplex receptacle: https://www.homedepot.com/p/329118072 Example of a recessed duplex receptacle: https://www.homedepot.com/p/202066691 Print instructions: Orient flat side UP hollow RECTANGLE on TOP…
Mount your HomePod Mini directly to a wall outlet with clean cable management and no bulky shelves. This design attaches to a standard US duplex outlet plate and hides excess cable inside for a minimal, clutter-free setup. 🔧 Features: •…
Files to Print: 1x Main_Body_LightSwitch 1x Switch Hat 2x Key_Attachment 2x Key_Attachment_pt2 2x Key_Attachment_Cover You need 2 10mm M3 for the key_attachments (Sizes up to 14mm work) For the top and middle bolts you need 2 20mm M3. You…
These are alternative faceplates for the Leviton SDX style fiber enclosures. Blank. SC/LC Simplex/Duplex. SC/LC Duplex/Quad Clearfield Clearview xPAK
--- for english, please scroll down --- --- moved from MyMiniFactory --- Dies ist ein Adaptereinsatz, um eine alte Duplexbatterie unauffällig mit einer CR123-Batterie zu ersetzen. Neben dem Adapter würd benötigt: die Hülse einer…
Für eine Wanddurchführung von 2 x Duplex Cat 7 Netzwerkkabeln benötigte ich eine Abdichtung/Kabelführung. Wellrohr: ID = 20mm AD = 25mm
Two Crickets Still iterating on the grip connector, it's not really better than some duct tape, but it does look nicer.
Use this faceplate for the Sonos One wall mount linked below. https://www.printables.com/model/1195170-sonos-one-outlet-mount
The Marley Duplex gutter should be attached to the fascia board, and the option to adjust the angle of the brackets was not sufficient. The adapters are printed at the appropriate angle (FreeCAD design). The examples shown here have an…
Enclosure for BrewPiLess - https://github.com/vitotai/BrewPiLess Removed LCD screw bosses, used screw/nut standoffs to simplify printing. Omitted ESP32 mounting screws bosses (hot glued custom perf board in place) Reworked for simple US…
Customized version of http://www.thingiverse.com/thing:47956 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=47956 Instructions Using the following options: 3rd_plate = none plate_width = 2…
I wanted to terminate a four-core fiber cable (diameter 2mm) using fast connectors. Buying a premade termination box is too easy. The box features two cable tie loops, one to hold the cable during splicing, another as a strain relief. A…
This model is a shorter version of the panel or bulkhead fitting for two anderson 45A powerpole pairs. It is sized to fit in a 33mm hole in an panel up to 6mm thick. A cap is provided for protection when not in use. This version does not…
This model is a panel or bulkhead fitting for two anderson 45A powerpole pairs. It is sized to fit in a 33mm hole in an panel up to 12mm thick. A cap is provided for protection when not in use. This version does not have a flange for…
44 Delta brings you the Duplicitous EZ magnetic pick handles available for you to print at home. These handles make the Law Lock Tools Duplex picks more comfortable in the hand. Required Hardware You are going to need magnets! These…
Wallmount for Diamond MX-72A
HomePod Mini Wall Mount for 2-Gang Duplex Outlet A clean and minimal wall mount designed for Apple HomePod Mini with integrated hidden cable management. This mount replaces a standard 2-gang duplex outlet cover plate and allows the…
Organize your HomePod Mini installation with a wall mount that replaces a standard US Duplex outlet cover plate. This landscape-oriented design includes integrated cable storage behind the speaker, helping reduce visible cable clutter…
A minimalist single-gang duplex outlet cover plate dimensioned to US ANSI/NEMA WD 6 standard. Fits any standard US single-gang duplex (two-socket) outlet box. Print it in any filament color to match your room. No supports needed. Included…
This tool fits the 23mm nuts that are used to adjust the tuning rods on Sinclair ResLock duplexers. Metal tools work fine, but you are limited in the rotation distance due to the length of the tool, and they will mar the soft metal parts.
3D model for the Partron DMJ1538HPC DUPLEX FILTER
Use this faceplate for the Sonos One wall mount linked below. https://www.printables.com/model/1195170-sonos-one-outlet-mount
I needed a wall plate cover for fiber at work. We currently use the keystone style where each fiber jack is separated by a gap, and I am not a fan of these as you have to separate the fiber tips (that are normally held together by another…
Combination wall plate with embossed Grateful Dead bears on it.
Design Concept The spiral abstract statue represents a modern duplex design, seamlessly combining art and architecture. Purpose Ideal for home or office decoration, this piece adds a contemporary touch to any space. Printing Suggestions…
A super-simple simple round cover plate. I printed this in PETG with Archimedean Chord fill on the main face because it prints near perfectly.
Customized version of http://www.thingiverse.com/thing:47956 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=47956 Instructions Using the following options: 5th_plate = none 2nd_plate = outlet 3rd_plate =…
By request, a duplex outlet wall plate with a PCB effect. Print "face down" with no supports. The .bgcode file includes a "filament change" pause so you can print two-color if you like. My other PCB wall plates: PCB Light Switch Cover:…
Printed with 0.6mm nozzle with supports for the roof overhang and where the roofs meet between the houses.
This is a large, two fan, wind spinner. The fans are contra rotating. Each fan consists of 6 sails, individual sails are 100x300mm ovals, 3mm thick. Hubs are 120mm wide, 15mm thick and each consists of two halves. The axle shaft is…
simple duplex mount, because unfortunately I couldn't find one with the function to be snapped in. This mount can be attached to the RC model with Velcro, for example. Recommended print settings: PETG 0.08 Layer height Supports necessary…
I've seen these for decora style outlets and with different wrapping configurations but none were “perfect” for me. This fits typical duplex outlets and the “wrap” part just covers regular wall (that's what's pictured). Mounts with the…
I've combined the cheek-rest pad and cheek-rest clips into one STL, so that they can print in one piece. This eliminated the need to glue these parts together.
