Liczymy pasujące modele…
Company logo of the fictional company "Cyberdyne Systems". Known from the Terminator movies. For multi-color printing, the filament needs to be changed after each color.
Parts are separated for colour change of your choice. 0.2 is fine to do entire print but if you have more patience I would recommend for the smaller parts printing with the higher resolution to get even a cleaner print. Infill on all…
I got tired of buying new travel toothpaste tubes once they ran out. Plus I started using Sensodyne and wanted to be able to travel with it. This adapter allows you to connect the tubes end-to-end and squeeze the Sensodyne toothpaste into…
https://www.printables.com/model/92532-baby-yoda-elmex-toothpaste-vomit/files
Skynet and Cyberdyne sign from terminator pinball. Makes a good logo and model for the terminator pinball
Skynet - Cyberdyne Systems Corporation, License Plate Frame, Terminator Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Your printer might become self-aware. Use at you own risk.
I wanted a nice way for my UHMWPE ridgeline for tarp rigging to slide through during tensioning. I'm using these on Tree-loops with eye splices. Designed for this rope:…
This must be my 3rd of 4th instalment of Dynerys Targaryen. Well lots of options anyway.
Reverse engineered the clip profile for Ergodyne Skullerz hard hats. Should be the same for Klein hard hats. Same profile for both the front and rear. I advise printing on the edge vertically with a good brim. Unless your supports are…
This is Dynetics' proposal for a lunar lander for the Artemis program. This lander is one of three HLS (human landing system) proposals accepted, along with proposals from SpaceX and Blue Origin. The width of the model is 1 foot, and…
Based on the excellent model by Neo Karman (https://www.printables.com/model/239174-cyberdyne-systems-terminator-wall-sign), this is a slightly altered version that is inspired by a t-shirt I saw being worn at my local model shop. The…
I didn't want to have to move my cover backwards to vent as I don't have the space behind my printer, so I've designed a hinged replacement insert that raises the storage box up around 12mm instead. They should slot straight into the…
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
YOYODYNE PROPULSION SYSTEMS, THE FUTURE BEGINS TOMORROW. Print Settings Printer: Fusion3D Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
Replacement pivot cups for PowerDyne Thrust Plates before June 2020 (The ones that are no longer made). These have been used over several months by competetive roller derby skaters and so far proven to be a suitable replacement. There are…
Based on the skysynergy's original model on Thingiverse, found here , this holder is a perfect companion for those with an Avidyne Bluetooth keyboard floating around the cockpit. This non-intrusive mount takes the hassle out of using they…
Wall bracket (adhesive) for Sensodyne toothpaste
Fits the Astrodyne TDI 084S.01500.00 and 082S.01500.00 C14 power inlet. This is a high quality power inlet for 120v 15amp max 3D printers. It is normally a “snap in” power inlet and is held in place by metal tabs, but often the force of…
This protects the props for a Teledyne Siras UAV when putting in the case or other storage means. Two models for printing if your printer requires a brim. Just cut the integrated brim away after printing. These print pre-tensioned and…
Printed in TPU filament. Glued in with Gorilla Clear contact adhesive.
I needed a means of identifying my microphones that would be subtile, yet still easily recognizable. I decided to insert the ring between the grill and the mic cartridge Designed to be printed with a 0.4mm lens Link to models for other…
I modeled this drip tray to replace the eroding original drip tray of the Teledyne ISCO Foxy Jr. fraction collector in our lab. The part in the pictures is printed in polypropylene (Formfutura Centaur Black) and extremely robust and…
The Walmart version of Cyberdyne's adapter fits a Brightroom 56qt storage box perfectly aside from front/back very slightly. I took the rear plugs from the ikea model and modified them so the Brightroom container sits forward enough and…
Echodyne EchoGuard radar cover. Note: the sample has a label printed directly onto it using a eufyMake UV 1.
### Overview The Sensodyne Mouthwash Bottle Opener is an adaptive 3D-printed tool designed to help users easily open child-proof or stiff Sensodyne mouthwash bottle caps. By providing an ergonomic outer handle and increased leverage, it…
Attach your Cloneman to your belt with this accessory! I made this for a friend, but figured someone over on the internet could make use of it. This could probably work with an original Walkman TPS-L2 but I haven't tested. Printed mine in…
Reverse engineered the clip profile for Ergodyne Skullerz hard hats. Should be the same for Klein hard hats. Same profile for both the front and rear. I advise printing on the edge vertically with a good brim. Unless your supports are…
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
I didn't want to have to move my cover backwards to vent as I don't have the space behind my printer, so I've designed a hinged replacement insert that raises the storage box up around 12mm instead. They should slot straight into the…
Echodyne EchoGuard radar cover. Note: the sample has a label printed directly onto it using a eufyMake UV 1.
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
The Walmart version of Cyberdyne's adapter fits a Brightroom 56qt storage box perfectly aside from front/back very slightly. I took the rear plugs from the ikea model and modified them so the Brightroom container sits forward enough and…
Print Instructions & Recommended Settings: This print profile is pre-configured to print the model upside down . This is the recommended orientation, as it significantly reduces the amount of support material needed (making…
I made this mount to attach my validyne pressure sensors to a 60 by 120 mm aluminum extrusion with a slot width of 8 mm. The part has to be printed twice (once mirrored around the z axis in the slicing software). The two individual parts…
