Dyness DL5.0C Terminal Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions & Recommended Settings: This print profile is pre-configured to print the model upside down. This is the recommended orientation, as it significantly reduces the amount of support material needed (making post-processing easier) and produces a perfect, flat top surface for the final part.
Printing Orientation: Upside down (top face down on the build plate).
Material: PETG (highly recommended for heat resistance on power terminals). ABS/ASA are also suitable. PLA is NOT recommended.
Layer Height: 0.2mm Standard.
Walls/Perimeters: 3 or 4 (for robust construction around screw threads and cable arches).
Infill: 20-25% Gyroid or Grid.
Supports: Required (normal or tree). Minimal tree supports are usually easiest to remove from the central hole when printed upside down.