Dyness DL5.0C Terminal Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom protective cover for the main power terminals (positive and negative) of the Dyness DL5.0C battery module
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions & Recommended Settings: This print profile is pre-configured to print the model upside down. This is the recommended orientation, as it significantly reduces the amount of support material needed (making post-processing easier) and produces a perfect, flat top surface for the final part.
Printing Orientation: Upside down (top face down on the build plate).
Material: PETG (highly recommended for heat resistance on power terminals). ABS/ASA are also suitable. PLA is NOT recommended.
Layer Height: 0.2mm Standard.
Walls/Perimeters: 3 or 4 (for robust construction around screw threads and cable arches).
Infill: 20-25% Gyroid or Grid.
Supports: Required (normal or tree). Minimal tree supports are usually easiest to remove from the central hole when printed upside down.