Liczymy pasujące modele…
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
Deutsch: E3V2 Modell als Cura Röntgen-Buildplate einrichten !!!UPDATE!!! Scheint nicht mit Cura 4.11 zu funktionieren. ich arbeite an einer Lösung! HALLO COMMUNITY ICH WOLLTE EUCH HEUTE MAL ZEIGEN WIE MAN SICH DEN ENDER3 V2 IN CURA…
Case for skr mini e3v2 and raspberry pi 3b
Update 08.01.2022: Please DONT USE WITH CR-TOUCH. If you use this arm with mountet CR-Touch your printhead cant hit the X-Trigger for stopping. Serious damage can cause!!! BL-Touch is no Problem. Update 16.09.2021: I added a long arm wich…
Just a remix of another handle, added a recessed hole that allows you to attach a camera without clearance issues. ** added the screw that fits in the hole with a flat blade to tighten in the hole.
I couldn't find anyone who has already made this? There's a lot of free space on the extrusion to the sides of the bed, and the Y axis doesn't interfere or collide with Gridfinity items placed on the baseplate, so there is no reason not…
Upgraded my Cr-10s pro with Afterburner, remixed the a microswiss toolhead to suit this hot end. Nozzle position remains the same, has been printing very reliably since the upgrade.
This is a custom hotend shroud, designed for the ender 3. It's compatible with a direct drive extruder and bl touch, it also has a mount for an ADXL345. the fan ducts are designed a tiny bit smaller than the stock 4010 blower outlet so…
Adapter is to fit a 4010 blower fan to the 5015 fan duct model (with BL touch bracket) for the Ender3 v2 by Jargogler. Temporary solution with the intent to upgrade to a 5015 blower at a later stage without having to reprint a new fan…
Update 2023-10-23 After having used it for a while, I do not recommend using this model anymore as it limits the z-axis range. Use with caution. ----- It's inspired by " Ender 3 Tool Holder " by korneelverraes . I liked it's design but…
The model is printed in two parts. The one part is used to keep the hex keys together. Having the hex keys in the first part, it's possible to mount them onto the Ender 3 V2 railings with the second part. This is my second version. The…
Those of us who use the Satsana model with CR-Touch cannot use it, with this we expand the model a bit and it allows us to use it again without problem.…
Created my own BPNVG v2 insert for the RunCam Night Eagle3 v2 This a friction fit.
I was looking for something similar to save me drawing one up but couldn't find one here. (There must be one somewhere but I couldn't find it, so apologies to anyone else who already has one here) This T square is just 4mm deep at the…
When I repositioned the spool holder to the side , it turned out the standard Creality 1kg spool was slightly touching the printer when slided to the very front. This small part makes the spoon holder slightly narrower so that the spool…
It's a spacer i used when mounting the speeddrive direct drive conversion to my ender 3 with a e3d v6 hotend. I've found that most E3D V6 mounts for the ender 3 offset the hotend 10mm forwards in comparison to the stock hotend so i just…
So, you built your Duender from one or more Ender3v2 or later and want to use the slimmer PSU, as well as the split power switch + outlet combo, but you don't want to shock yourself when touching it in the wrong spot? Then you've come to…
left side version Category: 3D Printer Accessories
Update: Version 2 now available, even better than the original! Fanduct that takes 40mm axial fans and attaches them to the Ugly Ender3V2 Toolhead. Includes a BLTouch mount because the original won't fit with these fanducts. Holes that…
This is a remix that allows for you need to put your glue stick or lighter in the hole. Category: 3D Printer Accessories
I've been upgrading my old Ender 3 printers that use direct drive extruders. The spool holder bracket upgrades enhance the filament feed and keep the filament spools angled back and inline with my direct drive filament feed. The angled…
modellled in fusion 360 for 0.4mm nozzle and 0.1-0.2mm layer
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
Update: Version 2 now available, even better than the original! Fanduct that takes 40mm axial fans and attaches them to the Ugly Ender3V2 Toolhead. Includes a BLTouch mount because the original won't fit with these fanducts. Holes that…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/g6mrlttqMjA Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Smith3D PLA Red Notes:…
