Wyniki wyszukiwania: earpod

Apple earpods / earbuds holder, wrap (USB-C)

A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.

Apple earpods (lightning cable) holder - optimized for Prusa MK3/MK3S

Note: I haven't used this in several years and as you can see in the photo, they worked for my headphones. Seems like they might not work for yours. The Fusion 360 F3D file is in the files section if you want to fix it. Needed something…

Earpod Headphone case Apple

Print Settings Printer: Prusa Mini+ Rafts: No Supports: No (little one) Resolution: .25 speed Infill: 10 Notes: Prints great, no supports.

EarPods case with cabel lock

Primary for EarPods, but for other headphones too. Perfectly fits in iPhone box. Cable lock tutorial: https://youtu.be/Ntaw8hiONeI Inspired by Apple Inc. Print instructions 3D model doesn't need supports

Apple earpods / earbuds holder, cable wrap (lightning)

A remix of the USB-C connector based version from @ChrisBoorman_136327.

Laptop Holders Organization Kit | SSD, AirPods, EarPods, Glasses, Pen, Camera Cover

This is the ultimate laptop holders organization kit. This will help you organize all necessary accessories for your laptop. Your desk will look extra clean. Kit includes : AirPods Holder with optional camera cover Single camera cover…

Apple earpods holder (jack 3.5)

Apple earpods holder (jack 3.5)

EarPods Lightning connector protector/saver

Only for EarPods, 3D model is not compatible with the Lightning charging cable! Print instructions 3D model does not need supports

Kryt na Apple Earpods

Kryt na drátová sluchátka od Apple. Earpods. Doporučuji během tisku venkovního dílu vyměnit filament aby byl vidět znak.

Apple EarPods Wrap - USB-C

A simple remix that accommodates the USB-C connector of Apple's newer EarPods

EarPods

A simple 3D printed case to hold earplugs ( https://amzn.to/2NMcVUU ). They magnetically close just like AirPods cases. Assembly instructions: https://www.instructables.com/id/EarPods-Earplug-Case/ Parts: 3D Prints (cover and base 1 each)…

EarPods box

I changed the shape to a cylinder as it doesnt damage my pockets. I left the problematic drawer and I use a thread to join both part of the cylinder. I used the same dimensions as in the original design the height and the diameter. It fit…

Apple Wired Earpod Storage Case

Print as shown below. Assemble with a piece of print filament.

Apple Earpods holder - 3.5mm Jack version

Adapted the model for earpods that has the 3.5mm jack connector - I just bought one to use my iPod Classic

EarPods 3,5mm jack connector protector/saver

Primary for EarPods Print instructions 3D model does not need supports

Ender 3 S1 Timelapse Rig for Iphone Earpods

You can see the application video from the following link: Iphone EarPods; https://www.apple.com/shop/product/MMTN2AM/A/earpods-with-lightning-connector Resolution: 0.1 mm Infill: %30 Filament brand: eSUN Filament material: PLA+ Cold…

RevoPoint Mini Pop2 Pop GearPod

Apple Earpod Cord Wrap

My version of an Apple earphone cable wrap organizer. Works with 1/8" audio, lightning, or usb c jacks. The 3MF has the file printed laying down and that works as-is, but if you want/need additional strength on the holders, you can print…

earpods Appel cable protection

All these earpod cables keep breaking, So i designed a cable guide, even keeps a cable going that already cracked. Printed in PLA for the detail. Also tried PETG, was no succes. Jan 1st 2022: new version V3.3: shorter body for phonecase…

Apple AirPod/EarPod Headphone Creepy Crawly Spiders

From the twisted mind of Chris Russell (@Crussty/Practical Printing) comes this nightmare fuel AirPod/EarPod accessory. Now you can have creepy spiders crawling on your ears just in time for Halloween! Sized for Chris's Airpods, you may…

Apple EarPods holder

Holder for Apple EarPods that can be attached to the microphone arm.

Nordli Bed Cup & Earpods Holder

These holder can be place both side of the side table on the IKEA Nordli bed. Cup Holder: 4 magnets 5mm x 3 mm Earpods Holder: 2 magnets 5 mm x 3 mm

Earpods Organizer ( Easy usefull)

Thats design have your earpods is tidy. You can easy use. Thats design have a 8 notch for cable security , 1 big hole for earpods and 1 nest for headphone jack. Headphone jack nest design is special thats design safe your cable. Thats is…

Phone Holder/stand for Switch/earpods/mini speaker

A cool Phone Holder for your Phone, Switch, Earpods or anything similar! It also has Holes for charging! Put a small Speaker inside and connect it to your Phone to turn it into a Small TV!

Dragon paw case earpods

Dragon paw case earpods

Kitty paw case earpods

Kitty paw case earpods

EarPods box

EarPods box I created this box for my Apple wired headphones when the original paper box became unusable. Shapes of the box were inspired by the original one. I like to use them. Everything is very simple. The only one issue is that the…

Earpod Dock with Apple Logo

This is a Remix of https://www.printables.com/model/50905-airpods-pro-charging-stand by Are_Kow. All credit to him.

Case para earpods Kitty paws

Case para earpods Kitty paws, para algunos se debe termoformar

Apple EarPods Holder / Cable Wrap (USB-C Remix)

A small wrap-style holder for Apple EarPods with the USB-C connector. I took the existing USB-C version and made one small change. Everything else, including the USB-C connector slot, is unchanged from the USB-C version. Per its designer,…

Earpod mockup

Wireless earphone model

Ladestation für IWatch und Earpods

Ladestation für I Watch und Earpods sowie für zwei USB Geräte USB-A und USB-C. viel Spaß beim drucken. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: No Category: Gadgets

Ladestation für IWatch und Earpods

Ladestation für I Watch und Earpods sowie für zwei USB Geräte USB-A und USB-C. viel Spaß beim drucken. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Supports:** No Category: Gadgets

Earpods magnet holder (or anything in this size holder)

I was tired of triyng to fit the earpods in its case after a work day, and decided to make an easy way to store it, and keep it out of my way on the desktop! So i just made this, it fits an 5,9mm (radius) and 3,0mm height magnet.

Earpods Holder Lightning/3.5mm jack

i mad it so i can have my 3.5mm jack earphones and the addapter to lightning

Gridfinity Earpods Holder

1x1 tile holder for Your wired headphones. Just tie 'em around two poles on a plate and you're done.

Earphones Holder (Apple EarPods)

While travelling, earpods tend to tangle up in the bag or the pocket. This holder should help you prevent that. The earphones and the port snap fit into the holder and hold everything in place.

EarPods box

Remix that flattens the bottoms of the 2 pieces to allow printers that don't do well with curves to print them flat instead of on a side. Allows for cleaner bottom layers and usually faster printing. Big enough for wired EarPods and a USB…

Earpod Pro holder

Made for a friend, maybe others will enjoy it.

Proction Apple earPods Lightning

Petite protection pour éviter le pli du câble et l'usure

Apple Wired Earpod Storage Case

Print as shown below. Assemble with a piece of print filament.