P
PrintablesTower 3D
Cute duck with knife threatens you
Feel free to print however you want, if you can print in two colors it's even better!
- Pobrania
- 382
- Polubienia
- 147
- Ocena
- 5
Wyniki wyszukiwania: eaten
Liczymy pasujące modele…
P
PrintablesJCreateNZ
Keycap Switch Top and Base - Perfect for FDM - JCreateNZ
JCreateNZ - Commercial License Available --- Keycap switch top and base. Fits over a keycap to fully enclose it - I made this as a base to model fidgets / clickers over. Free for personal use, if you would like a commercial license to…
- Pobrania
- 280
- Polubienia
- 21
- Ocena
- 0
P
PrintablesJCreateNZ
Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
- Pobrania
- 198
- Polubienia
- 18
- Ocena
- 5
P
PrintablesJCreateNZ
Stove Knobs - Multiple Sizes - Range, Oven, Grill, BBQ, Kitchen Appliance Control Knob - JCreateNZ
The knobs on my stove broke so I created new ones. The width of the pin it pushes onto was 6mm on my stove, however I have made multiple sizes. Free for personal use, if you would like a commercial license to sell this model please check…
- Pobrania
- 193
- Polubienia
- 15
- Ocena
- 5
P
PrintablesPrimaNeutrina
Primal: the Awakening - Aggro and Threatened Ring Miniature Markers
These rings replace the Threatened and Aggro tokens in the board game Primal: The Awakening . We used to place the tokens near our hunters on the game board, but we found it annoying to move all the tokens when we moved our hunters…
- Pobrania
- 119
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJCreateNZ
Round Tsurikawa - JCreateNZ
JCreateNZ - Commercial License Available --- This model is a round tsurikawa! the classic tsurikawa shape. This tsurikawa has a diameter of 10cm and is 1cm thick. Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10…
- Pobrania
- 110
- Polubienia
- 14
- Ocena
- 5
P
PrintablesJCreateNZ
Tsurikawa Standard Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 91
- Polubienia
- 4
- Ocena
- 5
P
PrintablesJCreateNZ
Tsurikawa Heart Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 80
- Polubienia
- 10
- Ocena
- 5
P
PrintablesJCreateNZ
Tsurikawa Rectangle Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Rectangle Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 78
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Strap Hole Template Tool - JCreateNZ
JCreateNZ - Commercial License Available This model is a tool for accurately punching the holes in a tsurikawa strap - for use with my tsurikawa strap locks (see my other designs for the free files). You can make a tsurikawa strap without…
- Pobrania
- 77
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Standard Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 70
- Polubienia
- 3
- Ocena
- 5
P
PrintablesThatgirlprints
Wheaten Terrier/Fluffy Dog Wall Art
Any dog lover like me would want this in their house.
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Standard Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 64
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJCreateNZ
Awareness Ribbon Tsurikawa - JCreateNZ
JCreateNZ - Commercial License Available --- This model is an awareness ribbon tsurikawa! This tsurikawa is 8cm wide, 10cm tall and is 1cm thick. Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10 screws and nuts,…
- Pobrania
- 56
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Heart Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Heart Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Star Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJCreateNZ
Birdhouse for larger birds - JCreateNZ
Recently, two Barbary doves have come to live in our garden - I looked for a birdhouse that would be suitable for them but couldn't find one, so I made my own! This model is a bird house - it is designed to be as large as possible for a…
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Star Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 37
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Rectangle Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Star Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJCreateNZ
NZ Rego Pouch Holder - New Zealand Car Registration - JCreateNZ
Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standard vehicle registration label ( NZTA…
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Octagon Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Oval Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Oval Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Oval Strap Lock Bottom (with snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPengLord
So, You've Been Eaten - Collector Edition
While technically not a remix, this design was HEAVILY influenced by https://www.thingiverse.com/thing:5409189 This holds everything from the Collector Edition and uses the tuck boxes to store the cards (sleeved with Mayday Premium). It…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 5
P
PrintablesHaggiwatt
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesW5AUG
Kitchen Sign - Many have eaten here few have died
Please like and follow and post your makes Funny sign for a small mom and pop restaurant or a foodie’s kitchen. No MMU required. Change colors by layer height.
- Pobrania
- 24
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSawyer Koepkey
Half-Eaten Chapstick Funny Prank Full Replica
A half eaten-Chapstick to prank your friends! 100% 3D Printed other than the wrapper (the wrapper is re-used from real Chapstick containers) Printing Tips: Use a lower layer height for less friction and better fits for the wrapper, cap,…
- Pobrania
- 24
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Octagon Strap Lock Top - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJCreateNZ
Tsurikawa Octagon Strap Lock Bottom (no snap button) - JCreateNZ
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPulp
So, You've Been Eaten - Premium Edition + language pack boardgame insert
This is an insert for the premium edition of the game So, You've Been Eaten. It has space for the the 'Confused Immune System' and 'Dyspepto-Beastmol'-Expansions. Since I ordered an optional language pack there is space for a 3rd deck of…
- Pobrania
- 21
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJCreateNZ
Mt Fuji Charm - JCreateNZ
JCreateNZ - Commercial License Available --- This model is a Mt Fuji hanging charm / keychain! This charm is 12cm wide, 5cm tall and is 6mm thick. Charms are designed with a 'channel' to allow for a 2.4mm (or smaller) ball chain to be…
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAllen Duke
Off The Beaten Path Hitch cover
Take the road less traveled with this rugged Jeep-inspired hitch cover! Designed for adventurers who live “Off the Beaten Path,” this 3D printable cover adds personality to your ride while showing off your love for the trail. Featuring a…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAnimaForge
Funny Warning Unattended Children Will Be Eaten Sign | Dark Humor Home Decor | Funny Wall Desk Plaque | Parent Housewarming Gift
AMS needed ayer Height: 0.08 mm Infill: 15% Supports: No supports needed!
- Pobrania
- 10
- Polubienia
- 6
- Ocena
- 0
P
Printables
NZ Rego Pouch Holder - New Zealand Car Registration - JCreateNZ
Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standard vehicle registration label ( NZTA…
P
Printables
Eaten Apple - Multicolor Print
This model was designed specifically for multicolor printing using an AMS system, keeping color transitions efficient while still achieving a strong visual contrast between the outer skin and inner core. The exaggerated inner structure…
