Wyniki wyszukiwania: eer

Customizable & stackable beer crate for all types of batteries

Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…

A *slightly* Overengineered Olpe Vase (print in vase mode!)

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Voronoi deer ornament

See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…

3D Printed RC SkidSteer V3.0

Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…

Reindeer Christmas Card Snap-Together Reindeer

This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…

Beer Can Lid/Soda Can Lid/Bug Cover (no supports needed)

Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…

Overengineered Bottle Opener and Cap Thrower (OBOCT)

Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…

A Moderately Overengineered Olpe Vase

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

"slightly" overengineered Anti Drag Cable Holder / Clip for Elegoo Neptune 3 + 4 Series

Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…

Overengineered Frisbee V2

I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough (the layer adhesion is too weak when flexed), so I've adjusted them, so that the frisbee is as flexible as possible without…

Reindeer napkin holder

Reindeer napkin holder for Christmas. Or why not every other time as well.

DEER Wall Art / Decoration

This is a DEER to be used as a decoration for a wall or whatever you like. if you have a creality 500 you can make it really big. normally you do not need raft, but depends on your bed adhesion. I have put also the gcode for creality both…

Tubenentleerer

Kleinere Version:

Deer

Lucky deer sculpt. The model is cut in the middle for less support.

Slightly over engineered Pull Copter flies over 20 meters

This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…

Deer – Majestic Forest Animal Sculpture

This deer sculpture reflects the elegance and serenity of a wild stag, with detailed antlers and posture that make it ideal for winter decor, fairy tale scenes, or nature lovers. Printing : Compatible with FDM and resin printers Supports…

Shopping Cart Coin Key - OLV (Overengineered Lightweight Version)

With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…

John Deere cookie cutter

K dispozici jsou 2 vykrajovátka na cukroví - s jelenem a bez jelena. Pokud chcete dělat cukroví jako na obrázku (linecké), udělejte jedno bez jelena, potřete ho marmeládou a přilepte k dílu s jelenem.

Bagheera Scout woggle. Leopard or Puma too!

Hey there, check out this Scout woggle inspired by Bagheera. It could also resemble a leopard or a puma. Bagheera, the awesome black panther and Mowgli's friend, is one of the main characters from Rudyard Kipling's "The Jungle Book" that…

Peg Perego John Deere gearbox spare gear

Spare gear for John Deere Peg Perego gearbox. Gear modify to bearing 628/8.

Stackable battery beer crate for C and D cells

I have create another beer crate battery holder from scratch. There are 2 bigger crates: 8x C cell 6x D cell

John deere RE67013 connector

currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them

John Deere Key Chain

John Deere key chain

Can Holder for Beer or Soda / Porte-canettes

To easily transport your beer cans from the fridge to the garden or terrace. Two models of handles are provided for 330ml cans and 500ml cans. A very easy to remove support is required where the handle comes to rest. It is also advisable…

Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”) with your own name

Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”). These lids fit glasses that have a thick glass rim with a diameter of 80 mm, and taper towards the opening (as on the cover picture). The hinge height can be…

hirsch für john deere motorhaube

kann auf die morhaube eines john deeres mit 4 schrauben befestigt werden

Reindeer with improved Antler connection

The original Reindeer card is a fantastic gift. I found the slot for the Antlers a bit small so I corrected the gap and now they snap together well Print instructions PLA in .15 or .20 seems to work well.

Beer Crate - Kleiner-Klopfer

Here is a little remix, because a friend asked me, to make a birthday present for her. Here you can place 6 small knocker bottles . These boxes are also stackable, but not compatible with the other original boxes

Minimalist Beer Crate for RC Expedition Car 1:10, 1:12

Hello, I have for you a Minimalist Beer Crate for RC car expedition 1:10, 1:12. The part is a crate for 20 and 12 beers, including beers. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the…

Slightly Over Engineered Trash Bag Roll Holder with door hooks

This is a remix of @MaxTs Slightly Over Engineered Trash Bag Roll Holder with additional door hooks that allow the holder to attach to any standard Ikea kitchen closet door without any glue or screws. The door hook's inner dimension is…

Beersaving Freezer. Cool your drinks in the water.

This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…

Eagles & Ohio State - Penny Beer Bottle Opener

Eagles & Ohio State - Penny Beer Bottle Opener

Canoe Beer Holder

A simple beer holder for aluminium Canoe

Winter Deer Decoration

Suitable as a winter or Christmas decoration, coaster under your cup, keychain or Christmas tree ornament Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm…

Nintendo Switch Joy Con Steering Wheel

20.1.2024 Another week point found. :) So here is version 3. Added rib to Slider to add overall stiffness Adjusted geometry of pins that push joy con buttons. Now you can feel and hear response when you push Paddle. bgcode and project…

Tennessee Volunteers T

Multi color 3D print of the Tennessee volunteers logo T. Made this for my father while he was in town! He's a big vols fan. This could be a great Christmas or birthday gift. Perhaps even as an ornament?

BEER FUND MONEYBOX

Pop or Beer Can Koozie

koozie that should fit in your hand and hold a standard can no support needed

Beer Tap

- pivní páka

Sleek Deer

Elegance in simplicity – the Sleek Deer is a modern, minimalist take on the majestic animal. With clean curves and a graceful pose, it adds a subtle touch of nature-inspired style to any space. Details: 📏 Height: 130 mm 🦌 Streamlined…

Kleiner Tubenentleerer

Tubendreher für kleine Tuben bis 45mm breite. Fertig gesliced mit 1 - 3 Tubendrehern :-)

Rudolph the Rednosed Reindeer Santa

Rudolph the Rednosed Reindeer Santa

New Concept - Quick Release for Sim Racing Steering Wheels

11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…

Over-Engineered BOYA Lavalier Microphone & Batteries Holder

Boya BY-M1 might be the perfect starter microphone, but the chord is much longer than I’ll ever need. And if you have one, you know you need to carry extra batteries. So, I over engineer with this #3dprint wrap where the mic and the audio…

Elk – Majestic Forest Deer Figurine

This elk figurine captures the impressive size and majestic antlers of this iconic forest animal. Ideal for collectors, educators, and nature lovers. Printing : Suitable for FDM and resin printing Supports : Required under antlers, legs,…

Earring elephant delirium beer pendiente keychain

If you use the STL file at its downloaded size, the color change occurs at layer 6 The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20%…

Harley Davidson Pivní podtácek/ Beer Coaster

Harley-Davidson ( výslovnost [ˌhaːli ˈdeividsn]) je americký výrobce motocyklů , motocyklového příslušenství a poskytovatel finančních služeb. Společnost byla založena v Milwaukee ve státě Wisconsin v průběhu prvního desetiletí 20.…

Beer Nukatap tap handle with Waveshare 2.7" e-ink display

Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle

Low Poly Reindeer – Christmas Special Edition

🎬 Video: Watch how this festive 3D model takes shape layer by layer: https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Description: This low-poly Christmas model captures the charm of the holidays with clean geometric…

Print-in-place steerable air vent

a fully printable air vent based off the XF / EA - ED Falcon's Interior design.

ClickTags - magnetic nametag with attachable interest wings - the queer & kinky nametag

The ClickTag is a nametag that was originally designed for a kinky event to enable people to show their contact interest and role. Attach or detach one or up to four of the color coded wings as your mood or interests change - they snap…

Chladvac - A beer bottle thermal isolation

A bottle cover that keeps your beer cooler for a bit longer if you want to drink it later. The walls are about 10mm. Bottles differ a lot so this one fits to most Czech beers, some German too but no guarantee. The bottle used for the…

Beer Koozie

This Beer Koozie Designed by Formu, creates an isulating air barrier between the drink and your hand, keeping the drink cooler and your hand warmer. Perfect for summer!

Minimalist Reindeer

Cute Reindeer Prints flat without any support, you will need about 20 grams of filament and half an hour at 100% scale in one color. You can make it multicolored by painting the antlers or adding a filament change at height. Print…

32 mm rockshox recon steerer tube plug

this is a remix to make the plug fit a 32mm steerer tube

Kawasaki KXF 250/450 2017 Clutch Cable steering holder

x

Over-engineered HomePod Mini wall mount (EU Plug)

Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…

Beer bottle organizer

This is my take on beer bottle organizer, this is designed for 6 bottle of 0,5l of your favourite beverage.

M10 screw hex knob (for e.g. steering wheel)

Simple M10 knob for screw with hex. Use small hammer to insert on the screw as it is tight (hit screw not knob). My son use it for mount computer steering wheel, as he lost original screw. UPDATE 2024-02-04 Bigger version of lower cnob.

Beer bottle fridge support (60mm)

In the Netherlands we have mostly 60mm beer bottles. This support can hold these bottles in the fridge. The cavity makes it possible to attach the support to the back of a glass plate (the plastic rig) so it won't slide when you get the…

Rudolph - Reindeer/Rentier

Rudolph ist in den jeweiligen Schichten mit Materialwechslen zu drucken Rudolph is to be printed in the respective layers with material changes Schichtdicke 0,10mm / Layer 0.10mm Infill 15% Bodycolor * bis/too 0.90 → Weiß/White → 1.20…

Football Worldcup Trophy beerglas

The FIFA Worldcup 2022 in Qatar is mere hours away, as I'm uploading the last files of this project. This worldcup is the first of its kind to take place in autumn, when the temperatures in most of the western football watching world…

Beer Tap Cleaning Adapter

This adapter serves as a crucial tool for maintaining the cleanliness and optimal performance of your beer dispensing system. Designed to screw directly into your beer faucet, it facilitates effortless cleaning of your beer lines,…

Beer chiller ice mold

More idea than real functional model. I have no printer so it is not tested. If somebody could try that it would make me happy. It is designed for 20pcs EU beer box - 0,5l one bottle. One ice block will chill 4 beers. For full box you…

Gridfinity for Orienteering Compass

Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699

Over Engineered Magnetic Dry Erase (expo) Marker Holder (works on flat AND curved surfaces)

Works on Curved Surfaces Print In Place living hinge magnets will “conform” to curved surfaces of many different diameters. Required hardware 3 magnets - The model has holes for 3/8in x 1/8in magnets which you can get from the link below…

Teenage Engineering OB4 Speaker Wall Mount

Wanted to hang my OB4 on the wall

Santas Reindeer No_Support

Reindeers are split to make easy to print w/o support. They glue together nicely.

Box for projector discs (krabička na promítací kotoučky) - mideer

If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…

Steer Tube Cork/Plug for tubeless repair kit

Steer Tube Cork for Fox 36 with Storage for this tubeless repair kit: https://www.amazon.de/gp/product/B097GCH7H8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The repair kit and the cork must fit tightly so that they do not loosen on…

Cass Beer Coaster - South Korea

Cass is a popular beer in South Korea. I created these coaster models as a souvenir for me and my friends. I hear that the Prusa Team loves beer so, here's to discovering and trying new beers from around the world. Printing Instructions…

Fast Beverage & BeerCooler

What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…

Overengineered Fellow Ode Gen 2 Bellows (PETG + TPU)

This is likely over the top thing, but if you like challenges, read on! Note: My first ever print of this model is in an office environment for a year already, and still works lika charm! So don't be affraid to try it! Printing…

Kyosho Burns steering servo mount

I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…

Small spiral spring. Kleine spiraal veer.

Had ik eens ergens gezien en heb het proberen te tekenen en het is gelukt. Misschien kan iemand ze gebruiken. Eventueel kan ik ze op maat maken? I once saw it somewhere and tried to draw it and it worked. Maybe someone can use them. If…

Reindeer / Rentier Kopf Dekoration

Lustiger RenTierKopf zur Dekoration von Geschenken, Flaschen, Räume,… passt auf Bier, Weinflaschen, Spirituosen,… Kann ohne Supports gedruckt werden! Im Datensatz für die MMU kann man die Farben der Einzelteile der Baugruppe ändern! Viel…

Surikata (Meerkat)

Model byl vytvořen v rodin.ai. The model was created in rodin.ai.

Aventon Level.2 steerer computer mount

Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…

Noche Buena Beer Coaster - Mexico

Noche Buena is a popular seasonal beer in Mexico, available only during the Christmas holidays. It originated in 1924 by German brewmasters and commercialized in 1938 as the first Bock style beer in Mexico. Noche Buena, meaning Christmas…

Winkelstück für Glasfaser Leerrohr D_außen= 7mm

Winkelstück für Glasfaser Leerrohr D_außen= 7mm

Narrow Can Holder for Beer or Soda / Porte-canettes étroites

To easily transport your beer cans from the fridge to the garden or terrace. This template is suitable for certain narrow-diameter cans (57 mm or 2"1/4) with a capacity of 250 ml or more. (For larger cans with a diameter of 66 mm - 2"…

Pioneer TS-A10955 4" pods

I need a pods for my van to contain the audio speakers, it doesn't have slots in the doors so I made pods for them. projected for Pioneer TS-A10955 4" only support YES material prusament Petg

Leffe - Belgian Beer

Despite not drinking alcohol at all, i'm very supportive of our national pride - beer. created the logo as a vector in dtp software and used thinkercad as my 3d skills are sadly still very limited.

Carson X-Crawlee suspension steering buckle

spare part new stronger version uploaded in addition.. . adopt if you like - FreeCAD file attached…

Gocheer 40 PSI Airbrush Kit Storage Box

A storage box for this Gocheer Airbrush Kit , specifically the 40 PSI version, but as long as the compressor is the same size, it should work for the 48 PSI option as well. Test print uses a low infill % (5%) and low top surface layers to…

Deurstopper voor automatische deur met veer. Door stopper for automatic door with spring. Butée de porte pour porte automatique à ressort.

Een deurstopper waarmee je de automatische deur kunt open houden op iedere afstand. Door dat de deurstopper naar beneden valt blijft de deur daar staan. Als je de deur achteruit trekt zal de stoppen mee schuiven tot je de deur weer los…

Atlas SLV-3C Centaur-D and Pioneer 12+13

I made this a year ago, and I let my science teacher keep the model, so I do not have the weight or time taken for each model (i forgot how long each piece took, but the whole thing took about 5-6 hours to design, and 8-9 to print so all…

Ed Sheeran Autumn Variations Album Coaster

⬜ 🍂 Autumn Variations For all Ed Sheeran fans, I created a set of 3D printable abstractions to represent his discography. This can be used as a beverage coaster , or just for display . It is square like a CD or vinyl album sleeve. I…

Roundhouse Engineering Lamp/Headboard Bracket

Print Instructions: Quality: Ultra-detail Nozzle Size: 0.4

Engineer hourly rate for electric electronic and 3D jobs

Engineer hourly rate for electric electronic and 3D jobs remix of https://www.thingiverse.com/thing:7074081 i added my own logo

Mikkeller Beer Coaster - Denmark

🇩🇰 Mikkeller Beer Mikkeller was founded in 2003 by Mikkel Bjergsø as a small craft beer brewer in Copenhagen, Denmark. Today it exports to 50 countries and operates bars and restaurants around the world. They have many kinds of craft…

Ølkasse AGF/Beer Crate AGF

3D Printed AGF Beer Crate – Perfect for the True Fan! Take your AGF fandom to the next level with this custom-designed 3D printed beer crate! Engineered for both style and durability, this crate is ideal for showcasing your support for…

Slightly Over Engineered Trash Bag Roll Holder

https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…

Beer crate battery holder AA AAA + boxes

Tento model jsem vytvářel sám v programu Autodesk Inventor Inspiroval jsem se modelem https://cults3d.com/en/3d-model/gadget/beer-crate-aa-battery-holder Vymodeloval jsem box podle fotek - rozměry nejsou identické STP modely jsou…

Voronoi Deer

This 3D model is a stylized representation of a deer with a distinctive Voronoi texture.

Cute minimalist Christmas reindeer decoration

This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…

Minimalist (Christmas) low poly reindeer

🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…

Bambu Lab Over-Engineered Y-Splitter

Please download from Makerworld. This STL is not the latest revision.

Voronoi Holiday Christmas Deer

The Voronoi Holiday Christmas Deer is a decorative piece that combines natural elements with a contemporary design technique known as Voronoi tessellation. The model features a deer with an intricate, lace-like structure that mimics the…

Can Lid (Soda, Water, Beer, etc.)

Update I am working on a slightly modified version that will work better with Bambu Lab's “TPU for AMS” - which is a harder plastic than standard TPU. While the use of this new flavor of TPU is probably more applicable to Bambu Lab users,…