Liczymy pasujące modele…
Simple hook (in four lengths from 10 - 40 mm) for the holes of the IKEA Elvarli connecting post/pillar. Simply hang in the hole and if desired firmly fix with the safety clip. Thus, unintentional sliding out is no longer possible and the…
Schichtdicke: 0.2 mm Material: PLA / PETG Infill: 15-20% Supports: nein -------------------------- Layerhight: 0.2 mm Material: PLA / PETG Infill: 15-20% Supports: nein
A simple hook that fits into the holes in the Ikea Elvarli pillars.
Haczyki świetnie spisują się do powieszenia kurtki czy bluzy, większy haczyk sprawdzi się również do powieszenia plecaka saszetki czy torebki.
Needed a way to hook things on the side of my IKEA ELVARLI entrance. Easy to install by sliding on the rail. Cannot fall. Plenty strong (provided 3mf uses “strength” profile).
Get a 25mm tube from the hardware store and you are ready to mount a new wardrobe rail to your ELVARLI shelf.
Helmet holder for the Ikea Elvarli shelves system. Print settings Print in PETG or stronger filament for durability, with these settings (or stronger): (calculated on a 0.4mm nozzle) 4 walls 0.2 layer height - 5 top and 5 bottom layers…
In case you want a quick method of storing your jacket without having to deal with the clothing hooks. Fits the 55 cm version of Elvarli. I recommend printing with supports and used PLA. I added 1 mm to my measurements and my print slides…
Kleiner einfacher Halter für eure Caps in einem Ikea ELVARLI Kleiderschrank
Printed at .3mm layer height. I included the f3d file for easy tweaks. The outer walls are thick - earlier iterations used thinner walls that deformed under load. There's a little divot on the inside to add a rubber foot to increase…
The wardrobe rail was too short for my custom width shelves, so I designed a printable extension. Use the Fusion 360 file to customize the length.
Mine Elvarli had a missing foot's thread...
Ok, super specific use case, but who knows? It'll maybe be useful for someone, or at least for inspiration for someone. Made a holder for my Pendix ePower 300 battery so I have a fixed spot for where the battery would charge. It slides…
A hook that fits Ikea's Elvarli wardrobe system T shaped side rail, to extend the storage space a bit. https://www.ikea.com/us/en/cat/elvarli-system-35766/ Print settings: I used PETG, 4 walls and 25% grid infill, and it is definitely…
Brother of the simpler Hook for Ikea ELVARLI side unit . Wanted the hook end to be smoother while the whole thing still be easy to print. Ended up with a design that uses the wood working jointery ideas from this NeedItMakeIt video .…
Every time I am moving or disassembling my Ikea Elvarli shelf, a few of these gets broken in the process. This time, I finally realized that it is simple enough to be 3D printed new part. Traced some pictures and created an STL file. The…
mm layers, 20% infill, 3 perimeters minimum, 3 top/bottom layers.
If you use the IKEA ELVARLI clothes rail , this custom clamp-on hook system is a simple but super useful upgrade for your laundry area, bathroom, or utility space. I designed this clamp specifically for the ELVARLI pipe so you can easily…
A hook that fits Ikea's Elvarli wardrobe system T shaped side rail, to extend the storage space a bit. https://www.ikea.com/us/en/cat/elvarli-system-35766/ Print settings: I used PETG, 4 walls and 25% grid infill, and it is definitely…
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ I created this Modell of the foot used with the IKEA shelf system for Elvarli up to scale
Simple clothes hook compatible with IKEA Elvarli system or any rod of diameter 25 mm.
Printed at .3mm layer height. I included the f3d file for easy tweaks. The outer walls are thick - earlier iterations used thinner walls that deformed under load. There's a little divot on the inside to add a rubber foot to increase…
It's not centred for easier printing, no supports needed. I printed 2 to hold my respirator in the photo, but you can print just one or more. Use PETG or stronger material if you're hanging heavier things. Tolerances are slightly loose,…
The IKEA ELVARLI shelf mounts can be used as wardrobe rails for hanging long stuff.
The IKEA ELVARLI shelves are convenient, but the deep 54cm version makes it hard to use the full space. Therefore, I created this drawer system to make best use of the space. You will need: BRESKO Schubladenschienen 50cm Vollauszug…
This is a little modification of the ultimaker tool holder, adapted for the Elvarli rails. Needs M5 nut and bolt. Print Settings Printer Brand: Creality Printer: CR-10 Mini Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Notes:…
Modified machinekoder's model to make it a bit thicker at the contact point.
