Ikea Elvarli shelf connector part 192284
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original shelf holder on my favourite Ikea shelf keeps breaking when moving, so I made my own 3D model. Ikea Elvarli set
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 717
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Every time I am moving or disassembling my Ikea Elvarli shelf, a few of these gets broken in the process. This time, I finally realized that it is simple enough to be 3D printed new part. Traced some pictures and created an STL file.
The resulting model is easy to print, fits perfectly, and does not have any trouble with holding weight. I would even say it is stronger than the original, but most likely the original just got more fragile with age.
Printed with PETG filament, but PLA should work fine too.
If it worked for you too, post a make :)