Liczymy pasujące modele…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…
Hook for frame with shelves. For example on a cloth or towel.
I always manage to push things off shelves and break them. These simple end stops put an end to that (no pun intended) and prevent things from falling off the sides of the IKEA® ENHET shelf. Print Instructions Use the provided STEP or STL…
This is an extremely easy and fast print. Because it's very thin, make sure to use a good quality filament so it won't break (I used white PLA+). Print on the side since it's the orientation that'll yield the strongest part. I'm using…
If you have lost your Ikea Enhet Clamp, now you can make your own! I used Pla and it fit really well. The first half gets in easy but after that its a tight fit! The harsh corners fill get rounded in the slicer and still fit greatly! For…
Replace the bottom and/or top bar from your IKEA ENHET Mirror cabinet with a Silverglans LED stripe. The Silverglans led stripe comes with a lot of different mounting options, for the middle bar there is a replacement option, but for the…
Height adjustable and fixed size legs for IKEA Enhet frame
This is the cover section of the IKEA Enhet, allows you to hide the bolt when attached to a wall. Fits ok, more at the looser end, not so tight. No special instructions for this print since it wont carry any load.
A drawer handle for the ikea enhet kitchen drawers to slide on top. We attached it using some strong double sided tape.
It is a tight fit, and requires an extra push when putting it in. Once in, you should be able to freely move them horizontally to adjust for your particular width.
For some reason you can't just buy these clips seperately from IKEA, and even if you if you could they'd be overpriced as f… just like every piece of powder coated metal this tax-avoiding illegal-lumberjack-ass company sells…. Anyways,…
Sometimes Ikea can be the easiest solution for most simple problems, In our case this was kitchen storage. In our kitchen we wanted to place an Enhet kabinet from Ikea, however due to the radiator placement this would not fit. To solve…
IKEA ENHET Endkappen für Wäschekorb/Wäschewagen
Standfüße für einen Ikea Enhet Badezimmerschrank! Gedruckt in PETG, Auflage aus Silikon.
So this is my Ikea (I think its called Enhet) cabinet nail polish storage. It will fit ikea cabinets that are 20cm deep and 30cm wide, it might work for deeper versions as well but I have not tried it on anything else. Print the Shelf and…
Permet de créer une étagère supplémentaire pour l'étagère en métal ENHET. Juste intégrer dans la pièce de droite (en chauffant) un écrou M3 et une vis qui traverse la pièce de gauche. Une petite gorge est prévu pour glisser un mdf ou une…
These brackets are my attempt to give my ivy plants a little help with climbing. They stand on an IKEA Enhet shelf and are supposed to climb along the steel frame. The smaller bracket is for a single brace and the larger one is for a…
Made a longer version so it fits the deeper Enhets
I've been having issues with my IKEA ENHET cabinet mounted right above my toilet. Since it is not very deep, often things would fall out, sometimes into the toilet. To prevent this from happening, I designed this end stop to keep things…
These adapters, made in TinkerCAD ( link ) will enable an IKEA Rothult smart NFC lock to be able to lock an IKEA Enhet bathroom mirror cabinet. I didn't end up using rothult-cabinet-adapters-cabinet-socket , only the other two files. To…
My mother in law asked me to design something to prevent things from sliding/falling to the side of the shelf. Fits Enhet 40x15x75 Prints vertically, no supports. To mount it, just tilt it and slide in, no additional hardware is necessary…
We could not find any suitable simple handle for our ENHET cabinet doors. My wife wanted something really simple so I came up with this simple door handle. Fits door 16.5mm thick.
Just remix of two models. Printed with tree supports.
Bracket designed to mount a SKADIS panel on an ENHET shelf. Compatible with the screws included with SKADIS. Allows for simple and stable installation.
Le montant du lit mesure 20 mm d'épaisseur.
cable holders for mounting on IKEA Enhet frames.
Do note this has to be mounted before you mount the cabinet on the wall. The best way to mount this is to add a strip of double sided tape to the top of the bracket, install them, add the benchtop and then slide the whole benchtop with…
I did not want to drill into our bathroom tiles fo secure our new enhet standing cabinet to the wall to prevent it from tipping over. So made these Anchors to be used with command strips or the like. They make use of the holes in the…
Easy to Print plant Support Bracket without Glue. You just need to stick the 10 x 2mm Magnet into it's Pocket.
ENHET standalone feet. You need two pieces and can simply mount it instead of the original front legs. No glue is requiered because it has a clamp design. Make sure you check the orientation of the part. To level it out I made a 3mm and a…
I came along models for the Enhet Ikea kitchen cabinet, unfortunatly those were for smaller beds and the "old" Baseplate. So I created a matching type for the Prusa Core L using the Gridflock designer , thanks Yawkat for that great tool…
The part was missing, so I designed it in CAD since I couldn't find a part number for it. V1: Initially, I messed up the CAD file and couldn’t add the small friction features on the outside. It’s a bit loose, but once you put it on the…
IKEA Enhet wall frame 40x15x75 holder for flowerpot, so it hangs in the frame instead of standing on the shelf. This was my first model, for hanging a pot into the frame, 2 of these fill a 40 cm wide wall frame.
This replaces one of the standard shelves in the Enhet upper cabinet. The main benefit is that the spools don't roll out (if you store without a bag) and that you gain some additional space in front. This allows to mount a honeycomb…
Just some simple labels for on the Enhet bags. No supports needed.
A modular 3-tier riser for spice jars, designed for the IKEA ENHET wall frame with shelves (60 x 15 x 75 cm). Every row sits higher than the one in front, so you can read all labels and lift any jar out without touching the others. Fits…
I came along models for the Enhet Ikea kitchen cabinet, unfortunatly those were for smaller beds and the "old" Baseplate. So I created a matching type for the Prusa Core L using the Gridflock designer , thanks Yawkat for that great tool…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
It is a tight fit, and requires an extra push when putting it in. Once in, you should be able to freely move them horizontally to adjust for your particular width.
