2744 modeli
My creativity level sky rockets when I'm drunk. For some reason, I decided to design and print a 6 pack 0.5L bottle holder yesterday evening, haha. It even has a lid! Don't ask why :P I guess I was looking for things to do, having a…
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
This is my remix of my remix of my remix of the E-3 Sentry AWACS aircraft. I tried to make the details better by scaling to 150% and making the Rotodome easier to assemble, if you're printing the 3 piece option. This is public release…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
gcode 10 hours is without brim gcode 12 hours is with brim
Wydruk około 8,53 €–10,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 16.11.2024: In der Mitte habe ich eine Stütze angebracht, da sich die Rundhölzer im Laufe der Zeit durchgebogen haben./ I added a support in the middle because the round timbers have bent over time. Dies ist ein Regal für einen…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist eine Wandhalterung für Filamentrollen. Zusätzlich zu den beiden Halterungen werden noch 2 Stäbe/Robe mit 12 Millimeter Außendurchmesser und 4 Schrauben (4x50) benötigt. Der Abstand zwischen den Haltern sollte einen Meter nicht…
Wydruk około 14,43 €–17,64 € nettoWstępna wycena jednego wariantu
Improved eccentric blocking system for MFT type workbench with 20mm holes. Printed in PETG, not to be used for hard work ! Details in 3mf file. Système de blocage excentrique amélioré pour établis type MFT 20mm. Imprimé en PETG, non…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: In the very simple and usable model of a filament spooler from 3D-Kalle, there are holes for attaching a pin to secure the shafts, but no pins are designed. Of course you could use a nail or pin, but metal is more slippery and…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My trophy design is centered around a computer mouse that I have used as a representation of Computer Aided Design, (I decided to use a mouse because I felt that a keyboard or PC tower, etc. wouldn’t be as visually pleasing). I wanted my…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Turn Any T70 Jar Into an Effective and Waterproof Fly Trap This printable insert transforms a regular glass jar with a T70 lid into a reusable waterproof fly trap. The lid requires a 60mm diameter hole , and the insert is glued from the…
Wydruk około 6,70 €–8,19 € nettoWstępna wycena jednego wariantu
Erhöhung, gemacht für grössere Rollen (2,5kg) damit diese nicht mit Werkzeughalter und Z-Achse zusammenstossen. Viel Spass damit.
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
This next test involves turrets. You remember them, right? They're the pale spherical things that are full of bullets. - GlaDOS Dont worry, 3d printed parts cannot shoot bullets or sing a song… yet. Here you can download and print your…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
FULL BUILD GUIDE FOUND HERE Contains all information about building the turret, including a BOM. DISCORD HELP SERVER FOUND HERE Find me and others who have built the turret and are here to help.
Custom log/driftwood shaped cave for fish, shrimp or reptiles. 20.5cm X 6cm X 7cm. I kept this design with a complete bottom and one closed off end unlike some of my previous designs; the thought is that it could function as a pleco…
Greebles! Entry panels, hatches, and more! No support required Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff: Construction: Building under…
Introduction A multifunctional tool that allows the following 4 main functions for use in the workshop: 1: Protractor, measurement and drawing of angles. (0 to 180 degrees)*. Debossed legends are included to indicate the angle#. Radial…
Any tips or donations are greatly appreciated ❤️ Or support on Patreon: https://www.patreon.com/printedencounter Also, made a video of me painting it here:
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
Drawn from https://x.com/Yugemaku/status/2065409694076948676 Remix it at https://cad.onshape.com/documents/ecef395d0126740c808e8498/w/7459f0b74d728c49a07721c2/e/cfa0ce91547c69737216c425?renderMode=0&uiState=6a30621c8ef74c640e30e41c Runs…
Ford Fiesta Centre Drawer The Ford Fiesta MK7 and up has a hidden center space that is usually used to remove the radio. This design is a drawer that fits in the space, giving extra storage and a acts as a phone mount when partially…
Video performance demonstration through the following link- All components 3D printed except nine M4x16 hex head bolts & nuts and one M6x50 hex head bolt and nut . Size: roughly 80mm x 80mm x 50mm Couplers intended for 1/2"IDx 5/8"OD…
Festool FastFix Centrotec holder - simplify your tool management Where do you currently store your FastFix Centrotec adapters? Print your own Festool FastFix Centrotec holder and make your everyday work easier and more productive. Don't…
This model is compatible with the lego system.
BMW E39 - Sliding cover for the central console storing partition of the BMW E39 Model. Suitable with part number oem 51
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
Easy to print drill marker - Parametric Not as sharp and durable as a metal version but for soft wood it works perfectly. Step file included in case you have any issues.
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
Yet another one of my experiments with gear designs (and I'm not done yet). Every gear has a different number of teeth, and the sun gear is not in the center (thus literally eccentric). Still, quite fidgetable. Note: With a bit of force…
This model is compatible with the lego system.
Sapo impreso en 3D que esconde el rollo dentro y dispensa el papel desde el interior. Diseñado para quedar espectacular en multicolor y funcionar como porta papel higiénico decorativo. Características Rollo oculto en el interior (papel…
Für das Kabel des GSensors. Zum sauberen Durchführen nach hinten. Kompatibilität zu SE und KE Ihr benötigt 1 weiteres Teil: Ender 3 V3 SE Spine cable Clamp to Spine by @ Adrian@3DPrintMasters Für die komplette Verkleidung benötigt Ihr…
This is a static model about 40cm high with room for electronics, it is the same size as this movable tracking model from which also contains instructions on how to make the legs:…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is my take on the mini sentry from TF2. While the model is mostly 3D printable, it has been designed with laser cut steel plates in the base for extra stability and strength. DXFs have been included. Bill of Materials Check out the…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
Motors can be mounted to the blower using M3 screws or glue. The screw holes are designed for motors with a diameter of 24mm. The top part of the blower can be just clipped into place but i would recommend gluing it in to prevent any air…
More than a year ago I printed a tf2 sentry (the red one in the pictures) and while it is really cool, having to glue everything was pretty tedious. Over time it also has completely fallen apart. After a lot of procrastination I've…
A centrifugal compressor wheel (it's not called a turbine!) designed more for looks and pretty renderings than for actual use. Designed in CATIA. I uploaded the original model here: https://grabcad.com/library/centrifugal-compressor-4…
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
Zentriering von 57.1mm auf 66.6mm in 10mm und 12mm tiefe Hub centric ring from 57.1mm to 66.6mm in 10mm and 12mm depth NEW VERSION ONLINE V2-→12mm V3-→10mm Gedruckt in PETG//Printed in PETG 0,12mm Qualität//0.12mm quality 0.4mm…
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
Simple centric one-hole, one-screw skadis wallmount. Unkomplizierte Skadis board Montage mit einer Schraube.
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 24.02.2024: A new version with a slotted hole is now available. This allows the…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
I was not able to find a holder big enough for all my cables, so I created one. The holder can be exteneded to the required length by inserting multiple middle sections. I have a few thicker cables, so I created the left section with…
A second variant for the koliva template (https://www.printables.com/model/808514-template-for-koliva-sablon-pentru-coliva/files), with the orthodox (rounded) cross.
This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…
All 3d-printed parts, including axles. Proof of concept, it doesn't really move much air - hand cranking at a reasonable pace, you can feel a little bit of movement. 1:8 gear ratio seems to be a bit of a sweet spot, but there's likely too…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
I originally modeled this a few years ago, after the companion cube from the portal series, and I recently went back and remade this version. It's best printed on an SLA printer due to the high detail of the model. This is fitted for a…
Pair with https://www.printables.com/model/1048539-model-train-railway-oo-tunnel-stone/collections
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
A mirrored version of the Fiesta Drawer with phone holder by Jacques Strauss for all people having the steering wheel on the left side of the car. Photos 2 and 4 show the version printed with a 0,3mm layer height almost without post…
Note: This is a prototype! A lucky little Robot Sentry, Number 13, has arrived to defend your desk from the evil AI of rogue Dummy 13 androids. Will the storm of electro-magnetically-propelled incendiary steel rounds stop the attack? Will…
Update - 2/7/26 Added WITH_WIRES_Mini_Robot_Print_PLA_White_v1.1 due to a mess up with the previous upload. Update - 2/21/25 Scaled the eye down slightly so it is an easier fit. Changed the tolerance of the guns to be looser. Print…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
This model is compatible with the lego system.
VW Wheel Centre Cap 77mm Part number - 7L6 601 149 Replacement of the original part in case of loss, breakage or just like that :) Tested in heavy traffic :)) During printing, you can change the color layer by layer for a better effect ;)…
This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…
Hi I made entrance reducer or closer (its modification of commercial product) Its 19cm long, 3cm high. ASA, ABS or at least PETG recommended for outdoor usage. Take care of orientation, and remember it will be pulled and probably…
Heads up In the meantime, there are other versions of the Secret Box: very easy to print and visually more appealing! Entire collection of “Secret Boxes” When I saw Ky3_actual 's box a few days ago, I was very taken with his idea.…
Drawn from https://x.com/Yugemaku/status/2065448124529975712 Remix it at https://cad.onshape.com/documents/ecef395d0126740c808e8498/w/7459f0b74d728c49a07721c2/e/cfa0ce91547c69737216c425?renderMode=0&uiState=6a30621c8ef74c640e30e41c Runs…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
A revamped version of this cute little model by Riddellikins. Some parts need to be mirrored in your slicer. The structural stability has been improved by locking the rotation of the main pivoting leg assembly. Feet and center mast are…
This model is compatible with the lego system.
This model is compatible with the lego system.
Zentradi Officer Pod and splits for easier printing. If someone wants to edit the entire ZOP, the rear motors aren't "merged" enough to print as one solid object and the motors will fall off. The new splits solve that problem. UPDATE:…
This is your basic centrifugal "blower" fan, using the motor from an old PC fan. The blades' center hole is 39.35mm in diameter, sized to press-fit over the motor/hub from a Coolmax 8015M12S ND1 fan (after removing the blades and sanding…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Hello! So this is a combination of two STLs I found online. I combined the clips from the Sentro as well as the shape of the Addi tensioner. Please Note: This is not for the Addi Express or Addi King Size Machines, if you need a tensioner…
"Here you leave today and enter the world of yesterday, tomorrow, and fantasy." This plaque has hung above the two portals under the Main Street Train Station at Disneyland's main gate since 1955. There are at least two other versions of…
Modelled as closely to the original as I could, while optimizing for printing. Arms open & close. PLEASE READ: You will need a small length of sturdy wire to attach the legs, unless you are printing the solid resin version. I used the…
Das ist ein Remix von meiner Kabeldurchführung mit 68mm Lochdurchmesser Hier der Link zu der 68mm Version: https://www.thingiverse.com/thing:4647847 ) Auf Wunsch habe ich diese 60 mm Version erstellt. Ich habe diese kleinere Version…
I kept having issues with the amount of force needed to move the filament through the PTFE tube. The only way to get it to feed freely was to keep the tube's loop, behind the printer, overly large. This version of the exhaust housing lets…
This model is compatible with the lego system.
This mount was designed for M720q/M920q mini PCs, but should work for any Thinkcentre Tiny with the same form factor. The mount has a seat for the Thinkcentre's rubber feet that keep the computer in place. I have a true 1U rear support…
My non-Skoda rims had some random logo, and I didn't want to pay 10-100 euros, so I made my own. Step file included.
This model is compatible with the lego system.
Final (likely) evolution of my attempt at creating a printable water pump. This pump is a dynamic pump, as opposed to my previous positive-displacement pumps, and performs much better. It also does not require sealing with a 3D pen to…
Hot off the smoking Anet A8! :) After being given a broken Anet A8, complete with melted wires, I set about fixing it and upgrading it with Marlin Firmware, level sensor and flexible steel print bed. This is my water pump design; with the…
Created to print on its back with NO SUPPORTS! Scale to whatever size you need for your game. Fun to print in marble PLAs. Enjoy! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Reading some of the comments from the original design and having some concerns myself, I wanted to make sure that it wasn't going to be a chore to remove tweezers quickly and easily. Luckily, the original designer provided the STEP file…
Hier eine Bienen-/Insektentränke mit einem Marmeladenglas, da mir die Flaschenvarianten zu wackelig erscheinen. Das passende Glas hat eine Öffnung von ca. 77,5 mm - diese gibt es ja in unterschiedlichen Höhen, siehe Fotos. Gedruckt habe…
I wasn’t satisfied with the center console trays that you can buy on Amazon/eBay and thought I would make my own that uses more of the available depth and customize it a bit for my needs. The one I did comes with various slots for things,…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
This Dungeon Entrance can be printed with no supports and used on your favorite RPG.
Wheel hub center caps for Skoda wheels Model is designed for 58mm diameter slot in the wheel. Print so that the logo is standing up, use supports. I printed them out of PETG so they would last longer in the heat, could eventually use some…
This model is based on the eccentric cycloidal drive. for this model you would need: 4x 608 bearings(the same ones that are in fidget spinners and skate board wheels). 2x m3 screws that are no more than 30mm long. and all 5 of the printed…
Kabeldurchführung Lochdurchmesser 68mm Der Kabelkanal ist für einen Lochdurchmesser von 68mm gedacht. Das ist das übliche Maß für Schalter- und Steckdoseneinbau. Für die Durchführung gibt es 4 verschiedene Abdeckungen mit 1 bis 3…
